My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Sensors 22 Products available
  2. Electric Circuit Components & Parts 19 Products available
  3. Auto Electrical Parts & Components 14 Products available
  4. Relays & Contactors 12 Products available
  5. Integrated Circuit 12 Products available
  6. Business And Corporate Gifts 6 Products available
  7. Batteries 6 Products available
  8. Electronic Development Boards 5 Products available
  9. Multimeter 4 Products available
  10. Electric Fittings And Components 4 Products available
  11. Others Products 188 Products available

Auto Electrical Parts & Components

We are leaders in the market for providing best range of Bo Motor, Bullet Connectors Brushless Motor, Coreless Motor, Brushless Motor and BIG DC TOY MOTOR

Bo Motor

A 300 RPM , single shaft straightDC geared motor. It is most suitable for light weight robot requiring small power. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Bullet Connectors Brushless Motor

This is a brushless outrunner motor specifically made for quadcopters and multirotors. It is a 930kV 1000kV 1200kV 1400kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters. The comes complete with mounting bolts, prop adapters and power leads. It can be used with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor

Coreless Motor

Material: MetalColor: MulticolourDimensions (L x W x H): 2.5 cm x 0.7 cm x 0.7 cmBattery Type: 3.7 V(DC); Safety Warning: Observe the clock wise and anti clock wise motor and fix the propellerPackage Contents: 4 Motors and 4 Propellers

Brushless Motor

This is a brushless outrunner motor specifically made for quadcopters and multirotors. It is a 930kV 1000kV 1200kV 1400kV motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium size quadcopters with 8 inch to 10 inch propellers. Use this to build powerful and efficient quadcopters. The comes complete with mounting bolts, prop adapters and power leads. It can be used with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor. An executive of Tweak Labs will call you up to confirm the speed of the motor to be shipped.

BIG DC TOY MOTOR

A Big DC motor is a mechanically commutated electric motor powered from direct motor (DC). It is of 2000 rpm. The stator is stationary in space by definition and therefore its current. The current in the rotor is switched by the commutator to also be stationary in space. This is how the relative angle between the stator and rotor magnetic flux is maintained near 90 degrees, which generates the maximum torque.

BIG ULTRA DC TOY MOTOR

A ultra Big DC motor is a mechanically commutated electric motor powered from direct motor (DC). It is of 2000 rpm. The stator is stationary in space by definition and therefore its current. The current in the rotor is switched by the commutator to also be stationary in space. This is how the relative angle between the stator and rotor magnetic flux is maintained near 90 degrees, which generates the maximum torque. Its Torque is Greater then that of Round DC and Big DC Motor.

ROUND DC MOTOR

A round DC motor is a mechanically commutated electric motor powered from direct motor (DC). It is of 2000 rpm. The stator is stationary in space by definition and therefore its current. The current in the rotor is switched by the commutator to also be stationary in space. This is how the relative angle between the stator and rotor magnetic flux is maintained near 90 degrees, which generates the maximum torque.

NEMA17 4.2KGCM STEPPER MOTOR

NEMA17 4.2Kgcm Stepper Motor for high torque applications. Ideal Motor for ATM machines, 3D printers, Peristaltic pumps and job positioning and rotating applications. Standard NEMA 17 frame size. 4.2Kgcm bipolar configuration motor.

Stepper Motor

  • Dimension Height with shaft: 5cm, Shaft height: 2.2 cm, Motor body: 3.5 cm.
It is a Bipolar, high accuracy, low noise, smooth movement 17HA series stepper Motor.Step Angle: 0.9 degree per step. Resistance per phase: 8 ohm. Inductance per phase: 11mH Rated Current: 0.43A Holding Torque: 90 mNm Detent Torque: 8mNm Rotor Inertia: 20g.cm square

MICRO VIBRATION MOTOR (FLAT)

  • Specifications Rated Voltage 3.0VDC, Operating Voltage 2.7~3.3VDC, 1.cm (diameter) X .27cm (thick), Wire length of 2.54cm Etc.
This is a small flat coin vibration motor with adhesive backing. Vibration motors are used today in an endless amount of applications. These are quality motors used in medical, automotive, consumer and industrial products.

2000 RPM TOY MOTOR

  • 1. Operating Temperature: - 10°C ~ +60°C
  • 2. Rated Voltage: 6.0VDC
  • 6. Starting torque: 20 g*cm
  • 8. Stall current: 500 mA max
These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with Arduino where you are more likely to have 5V or 9V available than a high current 3V setting. They'll fit in most electronics that already have 130-size motors installed and there's two breadboard-friendly. This Toy motor is cheapest in India.
View Complete Details

28BY J -48 5V STEPPER MOTOR

28BYJ-48-5V 4 Phase 5 Wire DC 5V Gear Step Stepper MotorStep motor, 4 phase 5 wire, DC 5V voltage, can be driven by ordinary ULN2003 chip, great replacement.

Servo Motor

A servomotor is a rotary actuator that allows for precise control of angular position, velocity and acceleration. It consists of a motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors.

100 RPM DC GEARED MOTOR

  • Features 100RPM 12V DC motors with Gearbox, 6mm shaft diameter with internal hole, 125gm weight.
  • Specifications 1.2kgcm torque, 100RPM base motor, No-load current = 60 mA(Max), Load current = 300 mA(Max)
100RPM 12V DC geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel.
Tell Us What are you looking for? Will call you back

Contact Us