Our Products
Measuring Instruments & Equipment
2 Products availableAccess Control System
1 Products availableCoupling
1 Products availableKitchen Appliances
1 Products availableMaterial Handling Machines & Systems
1 Products availableGearbox & Gear Parts
1 Products availableNut Fastener
1 Products availableNitrogen & Oxygen Gas Plant
1 Products availableSensors And Transducers
1 Products availableLeading Manufacturer, Supplier & Retailer of bulk cable, Programmable Gateway, Programmable HMI controls, industrial controls and Turck Contactless Encoders.
We offer cables in different qualities, perfectly tailored to the respective application. The products range from simple PVC up to PUR and PP cable types for food and beverage applications. All cables are available as yard goods or with injection-moulded connectors.
With the compact or modular RFID system from Turck, you can use the proven HF technology and the wide-reaching UHF technology in parallel in one identification solution. The Turck RFID system offers tags, read/write heads, connectivity solutions and the corresponding interfaces, which can be flexibly combined depending on requirements. Interfaces are available for PROFINET, EtherNet/IP, Modbus TCP, PROFIBUS-DP, DeviceNet, CANopen and EtherCAT.
The programmable gateways of the BL20 (IP20) and BL67 (IP67) I/O systems can be used as autonomous PLCs for control tasks or as network devices for fast signal preprocessing in the periphery. For this, the gateways have a fieldbus interface for PROFINET, Modbus TCP, Ethernet/IP or PROFIBUS-DP; in addition the gateways support standard Ethernet and serial communication. The extension modules communicate via the internal module bus with the gateway and can be configured independently of the fieldbus protocol.
The HMI controls of the TX500 product series have high-quality displays with brilliant graphics, resistive touch, and a modern processor. They are ideal for use in small to medium-sized machines, whose processes must be controlled, operated, and observed locally. The CODESYS 3 control of the TX500 has the functions PROFINET controller, EtherNet/IP and Modbus TCP as well as Modbus RTU Master. When used with Modbus protocols, the HMIs can also be operated as slaves. For visualization the CODESYS 3 target is used.
Control and monitor your production seamlessly and comfortable. We have the right automation solution for you - such as programmable gateways, as well as HMI operator panels and controls.
The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. Short power drops of maximally 50 ms are bypassed independently by the devices. Failsafe operation is enhanced through no-load and short-circuit protection as well as passive air cooling. The output current is - depending on the type - 2 A, 4 A or 8A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. The high efficiency of up to 90% provides a good energy balance.
Path measurement can be solved with various sensors. The inductive linear position sensors operate contactless and wear-free according to a revolutionary measuring principle. The position is not detected via a positioning magnet but via an oscillating RLC circuit. The product portfolio comprises magnetostrictive linear position sensors for position tracking in hydraulic cylinders or encoders for the tracking of floats as well as draw-wire sensors.
Over a length of up to 40 meters, path information is transmitted in a highly precise and dynamic manner to the higher-level controller via digital and analog interfaces.
The LED-lighting solutions for industrial requirements offer a wide range of work lights, tower lights and multisegment indicators. Moreover, also tower lights for visual and audible status messages, as well as robust LED work and machine lights. The devices are characterized by low power consumption. Thanks to their long lifetime, the LEDs need not be replaced.
The contactless encoders Ri360P-QR24 and Ri360P-QR20 make no compromises in terms of ruggedness and resolution and are suited to all those applications where rotation speeds, sense, position, angle and lengths have to be captured. These series are wear-free and will withstand even the harshest environmental conditions. Our range provides encoders in a wide variety of designs, graduated in a range of sizes from 24 mm up to 102 mm diameter, as versions for incremental or absolute position detection, and as hollow or solid shaft variants; they can be used to easily and reliably perform positioning tasks with a resolution of up to 18 bits for absolute encoders and of up to 36, 000 pulses per revolution for incremental encoders.
The degree of automation is very advanced in today's manufacturing technology. At the same time, machine and system hazards have been reduced considerably. This is, in particular, owed to the high demands on the safety technology and the skilled handling of safety functions. For security solutions in mechanical and plant engineering, we offer a choice of powerful, certified components and systems.
Our rugged inclinometers of the Q20L60 and Q42 series capture almost any inclination and can also be used in systems implementing fast motions or subjected to shocks. We offer sensors for angular ranges of 10, 45, 60 and 85 as well as with freely selectable measuring range 0360. The following output variants are available: 420 mA, 0.14.9 V, 010 V, PNP/NPN window as NC or NO contact, IO-Link, CANopen.
Flow monitoring is a procedure that demands a reliable and reproducible surveillance of limit values and flow patterns. Flow sensors detect critical deviations of the flow rate of liquid and gaseous media. Typical areas of application are the monitoring of cooling circuits in welding applications for example, protection against dry running of pumps, as well as the flow monitoring in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored.
Flow rate measurement
In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.
Everywhere, where digital signals must be electrically separated and processed or current and voltage limited power supply is needed, our interface devices are used such as isolating switching amplifiers, solenoid drivers, relay couplers and rotation speed monitors. The interface devices are available in the IP20 modular housing for DIN rail as well as in the compact IP67 housing for decentralized remote-site use. The product portfolio also comprises solutions for the Ex area and SIL-certified devices.
We offer round connector systems in M8 1/ 8 mm and M12 1 acc. to IEC 61076-2-101 as connection and extension cables. The 1/2" and 7/8" round connector systems are particularly suitable for applications with increased power requirements. The M16 and M23 0.75 1 round connector systems are used for connecting multiple junction systems. A, B, C, or I-type valve connectors acc. to EN 175301-803, are available with and without protective circuit for the connection of various different valves.
We offer the appropriate interface device for separating, forming, processing, converting and conditioning analog signals. The product portfolio comprises analog signal isolators, isolating transducers, temperature measuring amplifiers, potentiometer amplifiers, trip amplifiers and level monitors - for simple and complex requirements, for Ex- and non-Ex applications, available in the IP20 housing for DIN rail as well as in the compact IP67 housing for decentralized on-site remote control.
With the junction systems you can bundle several sensor signals or distribute actuator signals. 2-way splitters are available in the designs M8 x 1, M12 x 1 and 7/8". Passive 4 / 8-way junction boxes are available in the designs M8 x 1, 8 mm and M12 x 1. With these multiple junction systems you can transmit up to 16 I/O signals via a single multicore cable.
The IM(X) 12-CCM (Cabinet Condition Monitoring) can be installed and even retrofitted in virtually any cabinet or any protective enclosure to continuously check the current protection degree offered. The DIN rail device issues a switching signal to indicate
incorrectly closed doors and limit value violations for temperature and internal humidity to the control system.
Field-wireable connectors are available in sizes M8 1/ 8 mm, M12 1, 1/2", 7/8", M16 0.75, M23 1 and also as valve plug. The connectors make installation easier in applications in which it is difficult to estimate the needed cable length.
The inductive coupler of the NIC series is designed for contactless bidirectional transmission of power and data. The devices consist of two components, the primary part NICP and the secondary part NICS. The primary part supplies the secondary part with power via the air interface. In return the secondary part provides data to the connected sensors and actuators.