Our Products
Steel & Steel Products
2 Products availableMeasuring Instruments & Equipment
2 Products availableDoor & Window Fittings
1 Products availableWe offer a complete product range of TUBULAR HANDLE OFFSET OPEN JAW, pneumatic screw drivers, IMPACT HEX DRIVERS (FOR PNEUMATIC SCREW DRIVERS), Allen Head Power Bit and Spring Loaded Slotted Bit Finder
Tulex manufactures a variety of End Fittings or Spigot Insert Spanner Heads suitable for many Interchangeable Type of Torque Wrench brands across the world. These are used for accessing bolts in cramped and hard-to-access locations- easy to change. Available in chrome plated or black finish. These have eject pin for unlocking. Manufactured in Chrome vanadium steel material.
Unique, versatile design allows wrench to be used with or without optional handles Tubular Wrenches may be used without handle to quickly run down nuts The handle can then be attached to provide maximum turning power for final tightening or to reach otherwise inaccessible fasteners A detent on the wrench shaft helps to align locking button with handle hole Offset box wrench provides turning clearance
Tulex manufactures a variety of End Fittings or Spigot Insert Spanner Heads suitable for many Interchangeable Type of Torque Wrench brands across the world. These are used for accessing bolts in cramped and hard-to-access locations- easy to change. Available in chrome plated or black finish. These have eject pin for unlocking. Manufactured in Chrome vanadium steel material.
Spanner end fittings with spigot ends are available in the following types:1) RING END FITTINGSizes available: 7 mm to 46 mm & to 1.1/162) OPEN END FITTINGSizes available: 7 mm to 46 mm & to 1.5/163) FLARED END FITTINGSizes available: 7 mm to 27 mm & to 1.1/16
It is available in the following standard sizes to suit the Torque Handle Fitting of any brand :1) 16 MM SPIGOT ROUND2) 22 mm SPIGOT ROUND3) 9 X12 mm Rectangular End4) 14 x18 mm Rectangular End5) 24 x 32 mm Rectangular End6) 27 X 36 mm Rectangular end
Note : Open ends, Ring ends, Flare ends can be supplied in metric or imperial , chrome or black finish to suit almost every application. We also manufacture square drive crowfoot wrenches in 3/8, 1/2, 3/4 , 1 square drive in open end and bihex flared end types.
WE CAN MANUFACTURE IN ANY SPECIAL SIZES ALSO. PLEASE E-MAIL US YOUR ENQUIRY FOR PRICES.
The Swivel Handle can be used as a driving tool for manually operated sockets to tighten nuts and bolts located at awkward places, unapproachable by standard driving tools. All the driving handles are designed with adequate length to provide torque as per its size. In no case pipe etc are to be used for additional leverage. It is manufactured in 1/4" (6.35mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm), and 1" (25.4mm) square drives.
PART NO. | SQUARE | OVERALL LENGTH |
TUSH-150A | 1/4" | 150 |
TUSH-245B | 3/8" | 245 |
TUSH-380C | 1/2" | 380 |
TUSH-580D | 3/4" | 580 |
TUSH-815E | 1" | 815 |
Tulex Impact Hex Drivers / Nut Runners is a tool designed for operation with a pneumatic nut runner. The Hex Driver has a male Hex Drive on one end, which fits into the female hex shank of the nut runner and on the other end is a single hex socket. The range covers 1/4" (6.35 mm) hex drives for nut sizes 4 mm to 20 mm in three lengths i.e. 75 mm, 100 mm and 150 mm. Other sizes including SAE can be supplied against requests.
OVERALL LENGTH | 75 | 100 | 150 |
ACROSS FLAT SIZES |
PART NO. | PART NO. | PART NO. |
4 | TUHD-4W | TUHD-4X | TUHD-4Y |
5 | TUHD-5W | TUHD-5X | TUHD-5Y |
6 | TUHD-6W | TUHD-6X | TUHD-6Y |
7 | TUHD-7W | TUHD-7X | TUHD-7Y |
8 | TUHD-8W | TUHD-8X | TUHD-8Y |
9 | TUHD-9W | TUHD-9X | TUHD-9Y |
10 | TUHD-10W | TUHD-10X | TUHD-10Y |
11 | TUHD-11W | TUHD-11X | TUHD-11Y |
12 | TUHD-12W | TUHD-12X | TUHD-12Y |
13 | TUHD-13W | TUHD-13X | TUHD-13Y |
14 | TUHD-14W | TUHD-14X | TUHD-14Y |
15 | TUHD-15W | TUHD-15X | TUHD-15Y |
16 | TUHD-16W | TUHD-16X | TUHD-16Y |
17 | TUHD-17W | TUHD-17X | TUHD-17Y |
18 | TUHD-18W | TUHD-18X | TUHD-18Y |
19 | TUHD-19W | TUHD-19X | TUHD-19Y |
20 | TUHD-20W | TUHD-20X | TUHD-20Y |
Tulex Impact Hex Drivers / Nut Runners is a tool designed for operation with a pneumatic nut runner. The Hex Driver has a male Hex Drive on one end, which fits into the female hex shank of the nut runner and on the other end is a single hex socket. The range covers 1/4" (6.35 mm) hex drives for nut sizes 4 mm to 20 mm in three lengths i.e. 75 mm, 100 mm and 150 mm. Other sizes including SAE can be supplied against requests.
OVERALL LENGTH | 75 | 100 | 150 |
ACROSS FLAT SIZES |
PART NO. | PART NO. | PART NO. |
4 | TUHD-4W | TUHD-4X | TUHD-4Y |
5 | TUHD-5W | TUHD-5X | TUHD-5Y |
6 | TUHD-6W | TUHD-6X | TUHD-6Y |
7 | TUHD-7W | TUHD-7X | TUHD-7Y |
8 | TUHD-8W | TUHD-8X | TUHD-8Y |
9 | TUHD-9W | TUHD-9X | TUHD-9Y |
10 | TUHD-10W | TUHD-10X | TUHD-10Y |
11 | TUHD-11W | TUHD-11X | TUHD-11Y |
12 | TUHD-12W | TUHD-12X | TUHD-12Y |
13 | TUHD-13W | TUHD-13X | TUHD-13Y |
14 | TUHD-14W | TUHD-14X | TUHD-14Y |
15 | TUHD-15W | TUHD-15X | TUHD-15Y |
16 | TUHD-16W | TUHD-16X | TUHD-16Y |
17 | TUHD-17W | TUHD-17X | TUHD-17Y |
18 | TUHD-18W | TUHD-18X | TUHD-18Y |
19 | TUHD-19W | TUHD-19X | TUHD-19Y |
20 | TUHD-20W | TUHD-20X | TUHD-20Y |
tulex spring loaded slotted bit finder | |
tulex spring loaded slotted screw bit finder is used widely in automobile assembly lines. Its main function is to easily locate & to tighten the screws in a faster manner. It is available for a range of slotted screws as shown in below given table. |
Part No. | Screw Size | Blade Thickness (in inches) | Blade Width (in inches) |
TUBF - 6 | 6F – 7R | 0.038 | 0.250 |
TUBF – 7 | 7F – 8R | 0.040 | 0.275 |
TUBF – 8 | 8F – 10R | 0.042 | 0.312 |
TUBF – 10 | 10F – 12R | 0.046 | 0.360 |
TUBF – 12 | 12F – 14R | 0.050 | 0.375 |
TUBF – 14 | 14F – 16R | 0.055 | 0.475 |
TULEX TOOL KITS
Tulex Tool Kits are known for its superior quality, long life and durability. Given below are the different purpose Tool Kits offered by us. Our Tool Kits not only enables the operator to perform any type of assembly, repair and maintenance jobs efficiently and skillfully. Any major or minor job can be easily be completed with the assistance of our wide range Heavy Duty Tool Kits. If you so require any of our Tool Kits, please contact us with the part numbers to enable us to send you the content list for the requested Tool Kit.
We can also manufacture and supply you with customized Tool Kits. You can send us the list of tools required in the Tool Box. We can manufacture and supply you with Tool Kits that can suit your exact application.
We can also provide you with Tool Boxes, as per your size and specifications
Applications | |
Maintenance Shops, Service Stations, Garages, Automobiles, Sugar Plants, Boilers & Turbines, Refineries and Oil Rigs, Construction, Chemical and Fertilizer Plants, Nuclear / Thermal Power Plants, Railway Workshops and Heavy Earth Moving industry. |
DESCRIPTION | PART NO. | TYPE | |
1 | GENERAL ALL PURPOSE (HANDYMAN’S TOOL KIT) | TUTK-48-M | METRIC |
2 | MECHANICS BREAKDOWN TOOL KIT | TUTK-47-M | METRIC |
3 | MECHANICS BREAKDOWN TOOL KIT | TUTK-47-I | INCHES |
4 | MECHANICS BREAKDOWN TOOL KIT | TUTK-78-MI | METRIC & INCHES |
5 | VEHICLE MECHANIC’S TOOL KIT | TUTK-70-M | METRIC |
6 | CAR SERVICE KIT | TUTK-35-M | METRIC |
7 | ELECTRICAN’S TOOL KIT | TUTK-75-M | METRIC |
8 | ELECTRICAN’S TOOL KIT | TUTK-76-M | METRIC |
9 | GARAGE MAINTENANCE TOOL KIT | TUTK-94-M | METRIC |
10 | GARAGE MAINTENANCE TOOL KIT | TUTK-94-I | INCHES |
11 | GARAGE MAINTENANCE TOOL KIT | TUTK-141-MI | METRIC & INCHES |
12 | FITTER’S TOOL KIT | TUTK-103-M | METRIC |
13 | FITTER’S TOOL KIT | TUTK-103-I | INCHES |
14 | FITTER’S TOOL KIT | TUTK-161-MI | METRIC & INCHES |
15 | MACHINE SHOP MAINTENANCE TOOL KIT | TUTK-112-MI | METRIC & INCHES |
tulex spring balancershave been designed specifically to reduce the operators fatigue when working with heavy tools. Tulex spring balancer carries the load making it easy for the operator to concentrate on his work more effectively.
tulex spring balancer'scan be properly balanced by adjusting the spring tension and the balancer becomes almost weightless in the hands of the operator and can be moved up and down with very little effort. Our range of 15 models covers balancing capacity requirement from 0.25 kgs to 120 kgs.
apart from the standard rope travel, we can also cater to the requirements of extra long rope travel as per the client's specifications. We can also provide spares of spring balancers if required.
applications: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Part No. | Balancing Capacity | Rope Travel | Rope Dia | Unit Weight | General Tools Used |
Normal Area of Use |
|
Min (Kgs) | Max (Kgs) | (Mtrs) | (mm) | (kgs) | |||
TUSB-1.5 | 0.25 | 1.5 | 1 | 3 | 1.2 | Pneumatic Screw Drivers, Riveters, Impact Wrenches | Engine, Two Wheeler, TV and VCR, Refrigerator, Washing Machines Assemblies |
TUSB-12 | 1 | 2 | 1 | 3 | 1.2 | ||
TUSB-13 | 1 | 3 | 1.3 | 3.5 | 2.3 | ||
TUSB-2.55 | 2.5 | 5 | 1.3 | 3.5 | 2.5 | ||
TUSB-4.59 | 4.5 | 9 | 1.5 | 4 | 4.2 | Impact Wrenches, Small Portable Spot Welders, Riveters | Body Shop and Chassis Assembly of Cars, Tractors and Jeeps & Fabrication Shops |
TUSB-915 | 9 | 15 | 1.5 | 4. | 4.5 | ||
TUSB-1522 | 15 | 22 | 1.5 | 5 | 9 | ||
TUSB-2230 | 22 | 30 | 1.5 | 5 | 9.5 | ||
TUSB-3040 | 30 | 40 | 1.5 | 5 | 10.5 | Hydraulic Tools & Riveters, Nut Runners, Portable Spot Welders | Body Shop (Weld), Chassis Assembly |
TUSB-4050 | 40 | 50 | 1.5 | 5 | 11.2 | ||
TUSB-5060 | 50 | 60 | 1.5 | 5 | 12.6 | ||
TUSB-6070 | 60 | 70 | 1.5 | 5 | 13.2 | ||
TUSB-7085 | 70 | 85 | 1.5 | 8 | 25 | ||
TUSB-85100 | 85 | 100 | 1.5 | 8 | 27.5 | Multispindle Nut Runners, Pneumatic Riveters, etc. |
Assembly of Trucks, Van, Jeeps, Chassis Assembly Shop, Body (Weld) Shops |
1 1/2 inch Square Drive | 2 1/2 inch Square Drive | ||
Part Number | Size (inches) | Part Number | Size (inches) |
TUCS-48F | 2 1/4 | TUCS-56G | 2 3/4 |
TUCS-52F | 2 1/2 | TUCS-60G | 3 |
TUCS-56F | 2 3/4 | TUCS-63.5G | 3 1/2 |
TUCS-60F | 3 | TUCS-67G | 4 |
TUCS-63.5F | 3 1/2 | TUCS-70G | 4 1/2 |
TUCS-67F | 4 | TUCS-74G | 5 |
TUCS-75G | 5 1/2 | ||
TUCS-80G | 6 | ||
TUCS-83G | 6 1/2 | ||
TUCS-84.5G | 7 |
This type of Special Extension Bar has on one end Male Square and on the other end male " Hex Shank. These are available in 1/4" and 3/8" Square Drives with overall lengths ranging from 50 mm to 150mm. It is provided with a locking arrangement on the male square drive.
1/4"(6.35 mm) Male Hex Shank Extension Bars :
This type of Special Extension Bar has on one end Male Square and on the other end male " Hex Shank. These are available in 1/4" and 3/8" Square Drives with overall lengths ranging from 50 mm to 150mm. It is provided with a locking arrangement on the male square drive.