reversible ratchet handle is a tool, which has a feature of reversing the direction of operation in situ without detaching the socket. It has a mechanism for both right and left hand operations. It is available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives and 1.1/2 square drives.

following are the different types of reversible ratchet handle available with us :1) male square reversible ratchet handle2) female square reversible ratchet handle3) l type reversible ratchet handle4) female hex (6 point) /bihex (12 point) reversible ratchet handle5) podger reversible ratchet both sides female bihex wih tapered or straight handle

note: we can manufacture special sizes and in different lengths as per clients requirement.

We manufacture extension bar using premium quality material which includes en-4. Our extension bar is widely acknowledged for its high strength and performance. Clients from us extension bar at highly competitive prices. availability :manual extension bar :helps the operator to reach nuts and bolts located at inaccessible. Places where a driving tool cannot have access to sockets and/or where clearance for operations of driving tool is not available the male and female drives of this tool are of the same size available in 1/4" (6.35mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm) and 1" (25.4mm) square drive with overall lengths ranging from 55mm to 400mm for the above square drives impact extension bar :extension bar with two cross holesfor conventional impact wrench and extension bar with cross hole and groove for locking pin and ring for impact wrenches with cross hole in male square drive extension bar with different combination square drives and lengths can be manufactured against specific requirements the range covers 1/4" (6.3 mm) to 2 1/2" (63 mm) square drives in different lengths.

Extension Bar is a coupler interposed between the socket and the driving tool. This is used to reach inaccessible places where the driving tool cannot reach or the clearance for operation of driving tool is not available. These are of two designs - Extension Bar with two cross holes for conventional impact wrench and Extension Bar with cross hole and groove for locking pin and ring for impact wrenches with cross hole in male square drive. Extension Bar with different combination square drives and lengths can be manufactured against specific requirements. The range covers 1/4" (6.3 mm) to 2 1/2" (63 mm) square drives in different lengths.

Wea are offering reversible ratchet. Our reversible ratchet handle is remarkable tool which is capable of reversing the direction of operation inside without detaching the socket. Reversible ratchet handle is designed in such a manner that it can be operated from both right and left hand. It is available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives.

TULEX SOCKET SETS Tulex Socket Sets are known for their top quality and durability. The Socket Sets are manufactured under stringent quality control and each Socket Set can match the best of its kind from anywhere in the world. Each tool in the Socket Set are manufactured keeping the safety factor in mind.
Tulex Socket Sets can be supplied as per customer specifications and needs and for their OEM requirements. Each Socket Set is provided in a metallic Tool Box and the metal Tool Box is fabricated after stringent quality control to match the best of its kind from anywhere in the world. The Tool Box is powder coated. The Socket Sets are available in various square drive sizes ranging from 1/4" to 2.1/2". We have 2 different types of Socket Set and Accessories i.e. the Impact Socket Set and the Manual Socket Set. Basically the Impact Socket Set consists of Heavy Duty 6 point sockets and accessories while the Manual Socket Set contains 12 point Bi-Hex hand driven socket and accessories. Given below are details of our Socket Sets

An Extension Bar is a coupler that helps the operator to reach nuts and bolts located at inaccessible places, or where a driving tool cannot have access to sockets and/or where clearance for operations of driving tool is not available. One end of the Extension Bar is male which fits into the square drive of the socket and the other end is a female square drive where the driving tool fits in. The male and female drive of this tool are of the same size. It is available in 1/4" (6.35mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm) and 1" (25.4mm) square drive with overall lengths ranging from 55mm to 400mm for the above square drives.

Tulex Stud Tighteners also known as Stud Drivers is used for speedier tightening of threaded studs with the help of an impact wrench. This is ideal for use in the assembly and maintenance of engines. The range covers stud diameters M5 to M36 (metric) & 1/4" (6.35mm) to 1.1/2" (38.1) UNF/BSF (SAE/BRITISH) in 3/8" to 1" square drives. The tool has a cross hole and groove for locking pin andring arrangement.

Tulex Stud Tighteners also known as Stud Drivers is used for speedier tightening of threaded studs with the help of an impact wrench. This is ideal for use in the assembly and maintenance of engines. The range covers stud diameters M5 to M36 (metric) & 1/4" (6.35mm) to 1.1/2" (38.1) UNF/BSF (SAE/BRITISH) in 3/8" to 1" square drives. The tool has a cross hole and groove for locking pin and ring arrangement.

Stud Tighteners to suit BSW, BSF, UNC OR UNF Threaded studs also available on request as specials. Extra Deep Stud tighteners also available on request.

We are engaged in manufacturing of impact stud drivers which are used for speedier tightening of threaded studs with the help of an impact wrench. We manufacture impact stud drivers using superior quality raw material which makes it ideal for assembly and maintenance of engines. Our impact stud drivers covers stud diameter m5 to m36 (metric) & (6.35mm) to 1.1/2 (38.1) unf/bsf (sae/ british) in 3/8 to 1 square drives. The impact stud drivers has a cross hole and groove for locking pin and ring arrangement. features :low maintenancecorrosion resistantrobust constructionresistant to adverse conditionhigh performanceapplications :automobilesatomic power plantspetrochemicalsconstruction industry

Reversible Ratchet Handle is a tool, which has a feature of reversing the direction of operation in situ without detaching the socket. It has a mechanism for both right and left hand operations. It is available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives and 1.1/2 square drives.

reversible ratchet handle is a tool, which has a feature of reversing the direction of operation in situ without detaching the socket. It has a mechanism for both right and left hand operations. It is available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives and 1.1/2 square drives.

following are the different types of reversible ratchet handle available with us :1) male square reversible ratchet handle2) female square reversible ratchet handle3) l type reversible ratchet handle4) female hex (6 point) /bihex (12 point) reversible ratchet handle5) podger reversible ratchet both sides female bihex wih tapered or straight handle

note: we can manufacture special sizes and in different lengths as per clients requirement.

We manufacture extension bar using premium quality material which includes en-4. Our extension bar is widely acknowledged for its high strength and performance. Clients from us extension bar at highly competitive prices. availability :manual extension bar :helps the operator to reach nuts and bolts located at inaccessible. Places where a driving tool cannot have access to sockets and/or where clearance for operations of driving tool is not available the male and female drives of this tool are of the same size available in 1/4" (6.35mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm) and 1" (25.4mm) square drive with overall lengths ranging from 55mm to 400mm for the above square drives impact extension bar :extension bar with two cross holesfor conventional impact wrench and extension bar with cross hole and groove for locking pin and ring for impact wrenches with cross hole in male square drive extension bar with different combination square drives and lengths can be manufactured against specific requirements the range covers 1/4" (6.3 mm) to 2 1/2" (63 mm) square drives in different lengths.

Extension Bar is a coupler interposed between the socket and the driving tool. This is used to reach inaccessible places where the driving tool cannot reach or the clearance for operation of driving tool is not available. These are of two designs - Extension Bar with two cross holes for conventional impact wrench and Extension Bar with cross hole and groove for locking pin and ring for impact wrenches with cross hole in male square drive. Extension Bar with different combination square drives and lengths can be manufactured against specific requirements. The range covers 1/4" (6.3 mm) to 2 1/2" (63 mm) square drives in different lengths.

Wea are offering reversible ratchet. Our reversible ratchet handle is remarkable tool which is capable of reversing the direction of operation inside without detaching the socket. Reversible ratchet handle is designed in such a manner that it can be operated from both right and left hand. It is available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives.

TULEX SOCKET SETS Tulex Socket Sets are known for their top quality and durability. The Socket Sets are manufactured under stringent quality control and each Socket Set can match the best of its kind from anywhere in the world. Each tool in the Socket Set are manufactured keeping the safety factor in mind.
Tulex Socket Sets can be supplied as per customer specifications and needs and for their OEM requirements. Each Socket Set is provided in a metallic Tool Box and the metal Tool Box is fabricated after stringent quality control to match the best of its kind from anywhere in the world. The Tool Box is powder coated. The Socket Sets are available in various square drive sizes ranging from 1/4" to 2.1/2". We have 2 different types of Socket Set and Accessories i.e. the Impact Socket Set and the Manual Socket Set. Basically the Impact Socket Set consists of Heavy Duty 6 point sockets and accessories while the Manual Socket Set contains 12 point Bi-Hex hand driven socket and accessories. Given below are details of our Socket Sets

An Extension Bar is a coupler that helps the operator to reach nuts and bolts located at inaccessible places, or where a driving tool cannot have access to sockets and/or where clearance for operations of driving tool is not available. One end of the Extension Bar is male which fits into the square drive of the socket and the other end is a female square drive where the driving tool fits in. The male and female drive of this tool are of the same size. It is available in 1/4" (6.35mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm) and 1" (25.4mm) square drive with overall lengths ranging from 55mm to 400mm for the above square drives.

Tulex Stud Tighteners also known as Stud Drivers is used for speedier tightening of threaded studs with the help of an impact wrench. This is ideal for use in the assembly and maintenance of engines. The range covers stud diameters M5 to M36 (metric) & 1/4" (6.35mm) to 1.1/2" (38.1) UNF/BSF (SAE/BRITISH) in 3/8" to 1" square drives. The tool has a cross hole and groove for locking pin andring arrangement.

Tulex Stud Tighteners also known as Stud Drivers is used for speedier tightening of threaded studs with the help of an impact wrench. This is ideal for use in the assembly and maintenance of engines. The range covers stud diameters M5 to M36 (metric) & 1/4" (6.35mm) to 1.1/2" (38.1) UNF/BSF (SAE/BRITISH) in 3/8" to 1" square drives. The tool has a cross hole and groove for locking pin and ring arrangement.

Stud Tighteners to suit BSW, BSF, UNC OR UNF Threaded studs also available on request as specials. Extra Deep Stud tighteners also available on request.

We are engaged in manufacturing of impact stud drivers which are used for speedier tightening of threaded studs with the help of an impact wrench. We manufacture impact stud drivers using superior quality raw material which makes it ideal for assembly and maintenance of engines. Our impact stud drivers covers stud diameter m5 to m36 (metric) & (6.35mm) to 1.1/2 (38.1) unf/bsf (sae/ british) in 3/8 to 1 square drives. The impact stud drivers has a cross hole and groove for locking pin and ring arrangement. features :low maintenancecorrosion resistantrobust constructionresistant to adverse conditionhigh performanceapplications :automobilesatomic power plantspetrochemicalsconstruction industry

Reversible Ratchet Handle is a tool, which has a feature of reversing the direction of operation in situ without detaching the socket. It has a mechanism for both right and left hand operations. It is available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives and 1.1/2 square drives.