Our Products
Torque Wrench
2 Products availableMeasuring Instruments & Equipment
2 Products availableDoor & Window Fittings
1 Products availableProfessional Hand Tools
1 Products availableWe offer a complete product range of TULEX ANGLE / L-HANDLES, SPIGOT INSERT SPANNER HEADS FOR TORQUE WRENCHES, TULEX SWIVEL HANDLES, pneumatic screw drivers and TULEX IMPACT HEX DRIVERS
| |
PART NO. | SQUARE | OVERALL LENGTH |
TUSH-150A | 1/4" | 150 |
TUSH-245B | 3/8" | 245 |
TUSH-380C | 1/2" | 380 |
TUSH-580D | 3/4" | 580 |
TUSH-815E | 1" | 815 |
Tulex Torque Multiplieris a heavy duty tool used to increase the Torque produced by Torque Wrenches. They have been developed and designed to meet high torque requirements keeping in view space restrictions in Torque Wrench applications. Torque multipliers are suggested for either tightening of high tensile bolts or loosening rusty & frozen nut bolts.
Tulex Torque Multipliersare machined to high precision. The Gear units are designed for multiplication of input torque. Multipliers are recommended to be used where very high torque (over 100 kg mtr.) are required to minimize input effort. The use of Torque Multipliers reduces the manpower required as well as operator fatigue. The Multiplier has a Gear mechanism by which the Torque applied on the input side is multiplied in a particular ratio. Tulex Multipliers are available in Multiplication Factors of 5:1 & 25:1. Torque Multiplier covers Torque requirements from 100 kg mtr to 925 kg mtr. (750 lb.ft to 7000 lb. ft) |
APPLICATIONS: | |
Tulex Torque Wrenches are recommended to be used at the Input end to achieve an exactly calculated output Torque so the fluctuation of efficiency remains extremely small over a long period. It is extensively used in large Petrochemicals and Refineries. |
Hand Torque Model No. | Max. Output Torque | Bolt Capacity | Multiplication Factor | Female Input Sq. in | Male Input Sq. in | Major Dia. | Depth Recommended | Torque Wrench No. | Wt. With Reaction Plate Kg. | |||
Lb ft. | Nm | Kgf. m | In. | mm. | mm | mm | ||||||
TUTM-1 | 1250 | 1700 | 170 | 1.1/8 | 28 | 5 | 1/2 | 3/4 | 115 | 85 | TUT-250C | 4.5 |
TUTM-2 | 1250 | 1700 | 170 | 1.1/8 | 28 | 5 | 3/4 | 1 | 115 | 93 | TUT-250C | 5.0 |
TUTM-2/25 | 1250 | 1700 | 170 | 1.1/8 | 28 | 25 | 1/2 | 1 | 115 | 120 | TUT-50C | 7.0 |
TUTM-5 | 2000 | 2700 | 275 | 1.3/8 | 35 | 5 | 3/4 | 1 | 136 | 100 | TUT-500D | 8.0 |
TUTM-5/25 | 2000 | 2700 | 275 | 1.3/8 | 35 | 25 | 1/2 | 1 | 136 | 130 | TUT-100C | 11.0 |
TUTM-6 | 2500 | 3400 | 345 | 1.1/2 | 38 | 5 | 3/4 | 1.1/2 | 136 | 105 | TUT-750D | 8.5 |
TUTM-6/25 | 2500 | 3400 | 345 | 1.1/2 | 38 | 25 | 1/2 | 1.1/2 | 136 | 130 | TUT-100C | 11.5 |
TUTM-7 | 4500 | 6000 | 622 | 2.1/2 | 62 | 5 | 3/4 | 1.1/2 | 168 | 125 | TUT-1000E | 15.5 |
TUTM-7.25 | 4500 | 6000 | 622 | 2.1/2 | 62 | 25 | 1/2 | 1.1/2 | 168 | 180 | TUT-250C | 19.5 |
TUTM-9/25 | 7000 | 9500 | 965 | 3 | 75 | 25 | 3/4 | 1.1/2 | 220 | 170 | TUT-500D | 27.0 |
Tulex Torque Multiplieris a heavy duty tool used to increase the Torque produced by Torque Wrenches. They have been developed and designed to meet high torque requirements keeping in view space restrictions in Torque Wrench applications. Torque multipliers are suggested for either tightening of high tensile bolts or loosening rusty & frozen nut bolts.
Tulex Torque Multipliersare machined to high precision. The Gear units are designed for multiplication of input torque. Multipliers are recommended to be used where very high torque (over 100 kg mtr.) are required to minimize input effort. The use of Torque Multipliers reduces the manpower required as well as operator fatigue. The Multiplier has a Gear mechanism by which the Torque applied on the input side is multiplied in a particular ratio. Tulex Multipliers are available in Multiplication Factors of 5:1 & 25:1. Torque Multiplier covers Torque requirements from 100 kg mtr to 925 kg mtr. (750 lb.ft to 7000 lb. ft)
APPLICATIONS: | |
Tulex Torque Wrenches are recommended to be used at the Input end to achieve an exactly calculated output Torque so the fluctuation of efficiency remains extremely small over a long period. It is extensively used in large Petrochemicals and Refineries. |
SPECIFICATIONS:
Hand Torque Model No. | Max. Output Torque | Bolt Capacity | Multiplication Factor | Female Input Sq. in | Male Input Sq. in | Major Dia. | Depth Recommended | Torque Wrench No. | Wt. With Reaction Plate Kg. | |||
Lb ft. | Nm | Kgf. m | In. | mm. | mm | mm | ||||||
TUTM-1 | 1250 | 1700 | 170 | 1.1/8 | 28 | 5 | 1/2 | 3/4 | 115 | 85 | TUT-250C | 4.5 |
TUTM-2 | 1250 | 1700 | 170 | 1.1/8 | 28 | 5 | 3/4 | 1 | 115 | 93 | TUT-250C | 5.0 |
TUTM-2/25 | 1250 | 1700 | 170 | 1.1/8 | 28 | 25 | 1/2 | 1 | 115 | 120 | TUT-50C | 7.0 |
TUTM-5 | 2000 | 2700 | 275 | 1.3/8 | 35 | 5 | 3/4 | 1 | 136 | 100 | TUT-500D | 8.0 |
TUTM-5/25 | 2000 | 2700 | 275 | 1.3/8 | 35 | 25 | 1/2 | 1 | 136 | 130 | TUT-100C | 11.0 |
TUTM-6 | 2500 | 3400 | 345 | 1.1/2 | 38 | 5 | 3/4 | 1.1/2 | 136 | 105 | TUT-750D | 8.5 |
TUTM-6/25 | 2500 | 3400 | 345 | 1.1/2 | 38 | 25 | 1/2 | 1.1/2 | 136 | 130 | TUT-100C | 11.5 |
TUTM-7 | 4500 | 6000 | 622 | 2.1/2 | 62 | 5 | 3/4 | 1.1/2 | 168 | 125 | TUT-1000E | 15.5 |
TUTM-7.25 | 4500 | 6000 | 622 | 2.1/2 | 62 | 25 | 1/2 | 1.1/2 | 168 | 180 | TUT-250C | 19.5 |
TUTM-9/25 | 7000 | 9500 | 965 | 3 | 75 | 25 | 3/4 | 1.1/2 | 220 | 170 | TUT-500D | 27.0 |
Angle / L-Handle is used for driving manually operated sockets for working in restricted places. It is manufactured in 1/4" (6.35mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) SQUARE DRIVEs with OVERALL LENGTHs of 125 mm, 140 mm, 165 mm, 400 mm and 600 mm respectively.
PART NO. | SQUARE DRIVE | OVERALL LENGTH |
TULH-A | 1/4" | 125 |
TULH-B | 3/8" | 140 |
TULH-C | 1/2" | 165 |
TULH-D | 3/4" | 400 |
TULH-E |
1" |
600 |
Tulex manufactures a variety of End Fittings or Spigot Insert Spanner Heads suitable for many Interchangeable Type of Torque Wrench brands across the world. These are used for accessing bolts in cramped and hard-to-access locations- easy to change. Available in chrome plated or black finish. These have eject pin for unlocking. Manufactured in Chrome vanadium steel material.
The Swivel Handle can be used as a driving tool for manually operated sockets to tighten nuts and bolts located at awkward places, unapproachable by standard driving tools. All the driving handles are designed with adequate length to provide torque as per its size. In no case pipe etc are to be used for additional leverage. It is manufactured in 1/4" (6.35mm), 3/8" (9.5mm), 1/2" (12.7mm), 3/4" (19mm), and 1" (25.4mm) square drives.
|
||||||||||||||||||
|
Tulex Impact Hex Drivers / Nut Runners is a tool designed for operation with a pneumatic nut runner. The Hex Driver has a male Hex Drive on one end, which fits into the female hex shank of the nut runner and on the other end is a single hex socket. The range covers 1/4" (6.35 mm) hex drives for nut sizes 4 mm to 20 mm in three lengths i.e. 75 mm, 100 mm and 150 mm. Other sizes including SAE can be supplied against requests. |
OVERALL LENGTH | 75 | 100 | 150 |
ACROSS FLAT SIZES |
PART NO. | PART NO. | PART NO. |
4 | TUHD-4W | TUHD-4X | TUHD-4Y |
5 | TUHD-5W | TUHD-5X | TUHD-5Y |
6 | TUHD-6W | TUHD-6X | TUHD-6Y |
7 | TUHD-7W | TUHD-7X | TUHD-7Y |
8 | TUHD-8W | TUHD-8X | TUHD-8Y |
9 | TUHD-9W | TUHD-9X | TUHD-9Y |
10 | TUHD-10W | TUHD-10X | TUHD-10Y |
11 | TUHD-11W | TUHD-11X | TUHD-11Y |
12 | TUHD-12W | TUHD-12X | TUHD-12Y |
13 | TUHD-13W | TUHD-13X | TUHD-13Y |
14 | TUHD-14W | TUHD-14X | TUHD-14Y |
15 | TUHD-15W | TUHD-15X | TUHD-15Y |
16 | TUHD-16W | TUHD-16X | TUHD-16Y |
17 | TUHD-17W | TUHD-17X | TUHD-17Y |
18 | TUHD-18W | TUHD-18X | TUHD-18Y |
19 | TUHD-19W | TUHD-19X | TUHD-19Y |
20 | TUHD-20W | TUHD-20X | TUHD-20Y |
Tulex Impact Hex Drivers / Nut Runners is a tool designed for operation with a pneumatic nut runner. The Hex Driver has a male Hex Drive on one end, which fits into the female hex shank of the nut runner and on the other end is a single hex socket. The range covers 1/4" (6.35 mm) hex drives for nut sizes 4 mm to 20 mm in three lengths i.e. 75 mm, 100 mm and 150 mm. Other sizes including SAE can be supplied against requests.
Tulex Tool Kits are known for its superior quality, long life and durability. Given below are the different purpose Tool Kits offered by us. Our Tool Kits not only enables the operator to perform any type of assembly, repair and maintenance jobs efficiently and skillfully. Any major or minor job can be easily be completed with the assistance of our wide range Heavy Duty Tool Kits. If you so require any of our Tool Kits, please contact us with the part numbers to enable us to send you the content list for the requested Tool Kit.
We can also manufacture and supply you with customized Tool Kits. You can send us the list of tools required in the Tool Box. We can manufacture and supply you with Tool Kits that can suit your exact application.
We can also provide you with Tool Boxes, as per your size and specifications.
Tulex Tool Kits are known for its superior quality, long life and durability. Given below are the different purpose Tool Kits offered by us. Our Tool Kits not only enables the operator to perform any type of assembly, repair and maintenance jobs efficiently and skillfully. Any major or minor job can be easily be completed with the assistance of our wide range Heavy Duty Tool Kits. If you so require any of our Tool Kits, please contact us with the part numbers to enable us to send you the content list for the requested Tool Kit.
We can also manufacture and supply you with customized Tool Kits. You can send us the list of tools required in the Tool Box. We can manufacture and supply you with Tool Kits that can suit your exact application.
We can also provide you with Tool Boxes, as per your size and specifications.
No. | DESCRIPTION | PART NO. | TYPE |
1 | GENERAL ALL PURPOSE (HANDYMAN’S TOOL KIT) | TUTK-48-M | METRIC |
2 | MECHANICS BREAKDOWN TOOL KIT | TUTK-47-M | METRIC |
3 | MECHANICS BREAKDOWN TOOL KIT | TUTK-47-I | INCHES |
4 | MECHANICS BREAKDOWN TOOL KIT | TUTK-78-MI | METRIC & INCHES |
5 | VEHICLE MECHANIC’S TOOL KIT | TUTK-70-M | METRIC |
6 | CAR SERVICE KIT | TUTK-35-M | METRIC |
7 | ELECTRICAN’S TOOL KIT | TUTK-75-M | METRIC |
8 | ELECTRICAN’S TOOL KIT | TUTK-76-M | METRIC |
9 | GARAGE MAINTENANCE TOOL KIT | TUTK-94-M | METRIC |
10 | GARAGE MAINTENANCE TOOL KIT | TUTK-94-I | INCHES |
11 | GARAGE MAINTENANCE TOOL KIT | TUTK-141-MI | METRIC & INCHES |
12 | FITTER’S TOOL KIT | TUTK-103-M | METRIC |
13 | FITTER’S TOOL KIT | TUTK-103-I | INCHES |
14 | FITTER’S TOOL KIT | TUTK-161-MI | METRIC & INCHES |
15 | MACHINE SHOP MAINTENANCE TOOL KIT | TUTK-112-MI | METRIC & INCHES |
Next |
These are used for tightening of socket cap screws and bolts with pneumatic / hydraulic impact wrenches. The are available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm), 1" (25.4 mm) and 1.1/2 (38.1mm) square drives covering across flat sizes ranging from 3 mm to 50 mm (1/8" to 2" SAE). These Impact Hex Adaptors has a provision for locking pin and 'O' ring onto the impact wrench. For particular applications, we can also cater to requirement of extended length Hex Bit Sockets as per client specifications.
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHAM-3AI | 3 | 16 | 40 |
TUHAM-4AI | 4 | 16 | 40 |
TUHAM-5AI | 5 | 16 | 40 |
TUHAM-6AI | 6 | 16 | 40 |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHA-10AI | 1/8" | 16 | 40 |
TUHA-11AI | 5/32" | 16 | 40 |
TUHA-12AI | 3/16" | 16 | 40 |
TUHA-13AI | 7/32" | 16 | 40 |
TUHA-14AI | 1/4" | 16 | 40 |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHAM-3BI | 3 | 20 | 44 |
TUHAM-4BI | 4 | 20 | 44 |
TUHAM-5BI | 5 | 20 | 44 |
TUHAM-6BI | 6 | 20 | 44 |
TUHAM-8BI | 8 | 20 | 44 |
TUHAM-10BI | 10 | 25 | 50 |
|
PART NO. |
ACROSS FLATS |
HEX LENGTH |
OVERALL LENGTH |
TUHA-10BI | 1/8" | 20 | 44 |
TUHA-11BI | 5/32" | 20 | 44 |
TUHA-12BI | 3/16" | 20 | 44 |
TUHA-13BI | 7/32" | 20 | 44 |
TUHA-14BI | 1/4" | 20 | 44 |
TUHA-16BI | 5/16" | 20 | 44 |
TUHA-18BI | 3/8" | 25 | 50 |
1/2" (12.7 mm) Hex Adaptors : (Metric - mm sizes) |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHAM-6CI | 6 | 25 | 55 |
TUHAM-8CI | 8 | 25 | 55 |
TUHAM-10CI | 10 | 25 | 55 |
TUHAM-12CI | 12 | 30 | 63 |
TUHAM-14CI | 14 | 30 | 63 |
TUHAM-17CI | 17 | 30 | 63 |
1/2" (12.7 mm)Hex Adaptors : (American - inch sizes) |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHA-14CI | 1/4" | 25 | 55 |
TUHA-16CI | 5/16" | 25 | 55 |
TUHA-18CI | 3/8" | 25 | 55 |
TUHA-20CI | 1/2" | 30 | 63 |
TUHA-21CI | 9/16" | 30 | 63 |
TUHA-23CI | 5/8" | 30 | 63 |
3/4" (19 mm) Hex Adaptors : (Metric - mm sizes) |
|||
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHA-20DI | 1/2" | 30 | 80 |
TUHA-21DI | 9/16" | 30 | 80 |
TUHA-23DI | 5/8" | 30 | 80 |
TUHA-25DI | 3/4" | 45 | 95 |
TUHA-28DI | 7/8" | 45 | 95 |
3/4" (19 mm) Hex Adaptors : (American - inch sizes) |
|||
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHAM-12DI | 12 | 30 | 80 |
TUHAM-14DI | 14 | 30 | 80 |
TUHAM-17DI | 17 | 30 | 80 |
TUHAM-19DI | 19 | 45 | 95 |
TUHAM-22DI | 22 | 45 | 95 |
TUHAM-24DI | 24 | 45 | 95 |
1" (25.4 mm) Hex Adaptors : (Metric - mm sizes) |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHAM-17EI | 17 | 40 | 100 |
TUHAM-19EI | 19 | 40 | 100 |
TUHAM-22EI | 22 | 40 | 100 |
TUHAM-24EI | 24 | 50 | 110 |
TUHAM-27EI | 27 | 50 | 110 |
TUHAM-30EI | 30 | 50 | 110 |
TUHAM-32EI | 32 | 50 | 110 |
TUHAM-36EI | 36 | 50 | 110 |
1" (25.4 mm) Hex Adaptors : (American - inch sizes) |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHA-18EI | 3/8" | 40 | 100 |
TUHA-20EI | 1/2" | 40 | 100 |
TUHA-21EI | 9/16" | 40 | 100 |
TUHA-23EI | 5/8" | 40 | 100 |
TUHA-25EI | 3/4" | 40 | 100 |
TUHA-28EI | 7/8" | 40 | 100 |
TUHA-29EI | 15/16" | 50 | 110 |
TUHA-30EI | 1" | 50 | 110 |
TUHA-31EI | 1.1/16" | 50 | 110 |
TUHA-32EI | 1.1/8" | 50 | 110 |
1.1/2" (38.1 mm) Hex Adaptors : (Metric - mm sizes) |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHAM-30FI | 30 | 50 | 140 |
TUHAM-32FI | 32 | 50 | 140 |
TUHAM-36FI | 36 | 55 | 145 |
TUHAM-41FI | 41 | 60 | 160 |
TUHAM-46FI | 46 | 70 | 170 |
TUHAM-50FI | 50 | 70 | 170 |
1.1/2 (38.1 mm) Hex Adaptors : (American - inch sizes) |
PART NO. | ACROSS FLATS | HEX LENGTH | OVERALL LENGTH |
TUHA-30FI | 1" | 50 | 140 |
TUHA-31FI | 1.1/16" | 50 | 140 |
TUHA-32FI | 1.1/8" | 50 | 140 |
TUHA-34FI | 1.1/4" | 50 | 140 |
TUHA-38FI | 1.1/2" | 55 | 145 |
TUHA-41FI | 1.3/4" | 70 | 170 |
TUHA-45FI | 2" | 70 | 170 |
Tulex Spring Loaded slotted Screw Bit Finder is used widely in automobile assembly lines. Its main function is to easily locate & to tighten the screws in a faster manner. It is available for a range of slotted screws as shown in below given table. |
Part No. | Screw Size | Blade Thickness (in inches) | Blade Width (in inches) |
TUBF - 6 | 6F – 7R | 0.038 | 0.250 |
TUBF – 7 | 7F – 8R | 0.040 | 0.275 |
TUBF – 8 | 8F – 10R | 0.042 | 0.312 |
TUBF – 10 | 10F – 12R | 0.046 | 0.360 |
TUBF – 12 | 12F – 14R | 0.050 | 0.375 |
TUBF – 14 | 14F – 16R | 0.055 | 0.475 |
Tulex Spring Loaded slotted Screw Bit Finder is used widely in automobile assembly lines. Its main function is to easily locate & to tighten the screws in a faster manner. It is available for a range of slotted screws as shown in below given table.
Part No. | Screw Size | Blade Thickness (in inches) | Blade Width (in inches) |
TUBF - 6 | 6F – 7R | 0.038 | 0.250 |
TUBF – 7 | 7F – 8R | 0.040 | 0.275 |
TUBF – 8 | 8F – 10R | 0.042 | 0.312 |
TUBF – 10 | 10F – 12R | 0.046 | 0.360 |
TUBF – 12 | 12F – 14R | 0.050 | 0.375 |
TUBF – 14 | 14F – 16R | 0.055 | 0.475 |
We can also manufacture specific sizes not mentioned in our above tables, as per clients requests.
Tulex Spring Balancershave been designed specifically to reduce the operators fatigue when working with Heavy Tools. Tulex Spring Balancer carries the load making it easy for the operator to concentrate on his work more effectively.Tulex Spring Balancer'scan be properly balanced by adjusting the spring tension and the Balancer becomes almost weightless in the hands of the operator and can be moved up and down with very little effort. Our range of 15 models covers balancing capacity requirement from 0.25 kgs to 120 kgs.
Apart from the standard Rope Travel, we can also cater to the requirements of Extra Long Rope Travel as per the client's specifications. We can also provide spares of Spring Balancers if required.
|
Part No. | Balancing Capacity | Rope Travel | Rope Dia | Unit Weight | General Tools Used |
Normal Area of Use |
|
Min (Kgs) | Max (Kgs) | (Mtrs) | (mm) | (kgs) | |||
TUSB-1.5 | 0.25 | 1.5 | 1 | 3 | 1.2 | Pneumatic Screw Drivers, Riveters, Impact Wrenches | Engine, Two Wheeler, TV and VCR, Refrigerator, Washing Machines Assemblies |
TUSB-12 | 1 | 2 | 1 | 3 | 1.2 | ||
TUSB-13 | 1 | 3 | 1.3 | 3.5 | 2.3 | ||
TUSB-2.55 | 2.5 | 5 | 1.3 | 3.5 | 2.5 | ||
TUSB-4.59 | 4.5 | 9 | 1.5 | 4 | 4.2 | Impact Wrenches, Small Portable Spot Welders, Riveters | Body Shop and Chassis Assembly of Cars, Tractors and Jeeps & Fabrication Shops |
TUSB-915 | 9 | 15 | 1.5 | 4. | 4.5 | ||
TUSB-1522 | 15 | 22 | 1.5 | 5 | 9 | ||
TUSB-2230 | 22 | 30 | 1.5 | 5 | 9.5 | ||
TUSB-3040 | 30 | 40 | 1.5 | 5 | 10.5 | Hydraulic Tools & Riveters, Nut Runners, Portable Spot Welders | Body Shop (Weld), Chassis Assembly |
TUSB-4050 | 40 | 50 | 1.5 | 5 | 11.2 | ||
TUSB-5060 | 50 | 60 | 1.5 | 5 | 12.6 | ||
TUSB-6070 | 60 | 70 | 1.5 | 5 | 13.2 | ||
TUSB-7085 | 70 | 85 | 1.5 | 8 | 25 | ||
TUSB-85100 | 85 | 100 | 1.5 | 8 | 27.5 | Multispindle Nut Runners, Pneumatic Riveters, etc. |
Assembly of Trucks, Van, Jeeps, Chassis Assembly Shop, Body (Weld) Shops |
Tulex Spring Balancershave been designed specifically to reduce the operators fatigue when working with Heavy Tools. Tulex Spring Balancer carries the load making it easy for the operator to concentrate on his work more effectively.
Tulex Spring Balancer'scan be properly balanced by adjusting the spring tension and the Balancer becomes almost weightless in the hands of the operator and can be moved up and down with very little effort. Our range of 15 models covers balancing capacity requirement from 0.25 kgs to 120 kgs.
Apart from the standard Rope Travel, we can also cater to the requirements of Extra Long Rope Travel as per the client's specifications. We can also provide spares of Spring Balancers if required.
Besides a complete range of Tulex Heavy Duty Industrial Tools, we can also cater for special tools to suit critical applications as per drawings / specifications provided by the customer. Tulex may have what you need as a non catalogue item - or our experienced staff of tooling experts can design and produce applications specific special tools to suit your exact needs and requirements. Tulex begins its quality with the selection of best raw materials and each tool manufactured by Tulex is machined under close tolerance standards. You will always get an exact, sure fit - a fit not possible from tools made in a process that grows less precise with every stamp. Each tool goes through perfect heat treatment and tempering process that lets you select the highest degree of hardness you desire.
This type of Special Extension Bar has on one end Male Square and on the other end male " Hex Shank. These are available in 1/4" and 3/8" Square Drives with overall lengths ranging from 50 mm to 150mm. It is provided with a locking arrangement on the male square drive. |
Tulex Dualers can be applied throughout the plant and its versatile design makes it compatible with slugging, impact and hydraulic wrenching. These tools are also available in metric & inch sizes. Please request for sizes and details. |