My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Industrial Valves 9 Products available
  2. Pipe Tees 8 Products available
  3. Plumbing & Pipe Fittings 4 Products available
  4. Nuts Bolts And Fasteners 4 Products available
  5. Adapter 4 Products available
  6. Pipe Elbows 4 Products available
  7. Valves & Valve Fittings 3 Products available
  8. Threaded Pipe Fitting 3 Products available
  9. Hardware Fittings And Accessories 3 Products available
  10. Lock Nuts 3 Products available
  11. Others Products 32 Products available

Our Products

Our offered Product range includes Bleeder Valve, Vent Protector, Street Light Cut Outs, CHEMICAL INJECTION QUILL and Allen Plug.

Gauge Valve

Bonnet Assembly :
Screwed bonnet design.
Bonnet - back seated blow out proof
Spindle - ground and thread rolled.
Spindle tip - non rotating tip shut off type - regulting and soft seated. Packing below thread.
Bonnet pusher - silver plated for anti galling freezing for increased stem cycle life.
Dust cap protects stem threads from externals contamination leak tight seal with low operating torque.
Technical specifications :
End Connection : NPT, BSPT , Socket Weld.
Working Pressure : 6000 psi (431 bar)
Temperature Rating : ptfe 450 f (232 c ) grafoil 700 f (371 c)
Material of Construction : SS 304 , Monel , C.S , SS 316
Stem Pcking : PTFE Grafoil
Orifice: 4.7
All valves are 100% factory tested prior to shipment.
Optional sour gas service valves are available confirming to nace STD MR - 01 - 75
Application :
Pressure switches, gauges & differential pressure , pressure transmeters suitable for block & bleed assemblies to test pressure source required in sampling line or plug valve.Refineries, liquid petroleum gas processing plantpetro- chemicalplants systems difficult to shutofdue to solid contents dust, rust, dirt etc
Testing :
Pneumatic seat test is performed at 1/4 of working pressure hydrostatic shell test is performed at 1.5 times the working pressure optional test are available upon request.
Lubrication :
Molybdenum disulphide (mo s2)

 
Tubefit part no. H W H1 PRIFICE L Size CV
GRNSV1-6K-S6-4NMX4NF 77(3.03") 25.4(1") 84(3.31") 4.7(0.18") 73(2.87") 1/4"(MxF) 0.63
GRNSV1-6K-S6-4NFX4NF 77(3.03") 25.4(1") 84(3.31") 4.7(0.18") 73(2.87") 1/4"(FxF) 0.63
GRNSV1-6K-S6-8NMX8NF 77(3.03") 32(1.26") 84(3.31") 4.7(0.18") 102(4.01") 1/2"(MxF) 1.80.
GRNSV1-6K-S6-8NFX8NF 77(3.03") 32(1.26") 84(3.31") 4.7(0.18") 102(4.01") 1/2"(FxF) 1.80.
GRNSV1-6K-S6-12NMX8NF 80(3.15") 38(1.50") 87(3.42") 4.7(0.18") 102(4.01") 3/4"Mx1/2"F 1.80.
GRNSV1-6K-S6-12NMX12NF 80(3.15") 38(1.50") 87(3.42") 4.7(0.18") 102(4.01") 3/4" (MxF) 1.80.
View Complete Details

Bleeder Valve

Vent or bleed valves can be used on instrumenttion devices such as multivalve manifolds or gauge/root valves to vent single line pressure to atmosphere before removal of an instrument or to assist in calibration of control devices. Compact for convenient installaion. Male npt & sae end connection.
Tesing :
Every vent or bleed valve is factory tested with nitrogen at 1000 psig.
Seats have a maximum allowable leak rate of 0.1 std . Cc/min.
Shell testing is performed to a requrement of on detactable leakage with a liquid leak detector.
View Complete Details

2 Way Ball Valve

Features :
SS 316 construction for corrossion resistance, full or reduced bore for excellent flow.3 piece design.peek/delrin seat for better performance.
Ball hard chrome plated for smooth operation.
Physical Features :
Pressure rating 400 kg/cm2
Material Options :
Brass, SS 316, carbon steel, bronze, hastalloy, monel, etc.
Optional kel-f, viton packing available with high pressure valves
Standards :
BS 5750; ISO 9001-2000; MSS SP-99
Testing :
For seat and seal leakage with a leakage rate of 0.1 std. Cm3.
Working pressure : 6000 psi (431 bar)
Hydro Tests :
Performed with pure water at 1-1/2 times of the working pressure.
Other tests like helium, seismic are availbale upon request.
End Connections :
End connections available in NPT / BSPP / BSPT / JIC / SAE

A1(Male) A1(Female) Tubefit part no. C Size E L A' ORIFICE B'
88(3.46") 76(2.99") 2WBV-RPB-6K-S6-PM-4NF 37(1.46") 1/4" 49(1.93") 110(4.33") 40(1.57") 5(0.20") 30(1.18")
88(3.46") 76(2.99") 2WBV-RPB-6K-S6-PM-6NF 37(1.46") 3/8" 49(1.93") 110(4.33") 40(1.57") 8(0.31") 30(1.18")
111(4.37") 101(3.98") 2WBV-RPB-6K-S6-PM-8NF 48(1.89") 1/2" 64(2.52") 180(7.09") 53(2.09") 9.5(0.37") 35(1.38")
118(4.64") 108(4.25") 2WBV-RPB-6K-S6-PM-12NF 60(2.36") 3/4" 67(2.64") 180(7.09") 60(2.36") 12(0.47") 48(1.89")
136(5.35") 126(4.96") 2WBV-RPB-6K-S6-PM-16NF 68(2.68") 1" 67(2.64") 180(7.09") 68(2.68") 20(0.79") 55(2.16")
View Complete Details

Syphon

Syphons should be used in all steam applictions.pigtail steam syphons protect the instrument from damaging effects of direct exposure to high temperature steam.
To properly install and use a syphon with water and install the pressure gauge.The water will fill the lower half of the coil and will act as a protective barrier betweenthe high temperature steam and the pressure gauge.
Optional IBR approval is offered, depending upon customer requirement
Features :
Syphons are available with butt weld, socket and threaded end connections.
Material :
SS 304, SS 316, C.S, Monel (Seamless Pipe)
Note :
All syphons are 100% factory tested prior to shipment.
View Complete Details

Long Reducer

Note :
The dimension is the minimum opening & fitting of this group may be back drilling to larger id at pipe thread or straight thread end.
Dimensions are for reference only and subject to change.
Dimension l1, c, d is shown in the finger-tight position.

 
Tubefit part no. Equivalent Part no. Type 1 Equivalent part no Type 2 ODT-ØT ODT-ØT1  C BODY HEX F Ø E D NUT HEX W L L1
6-LRD-8 -600-RF-8 -------- 3/8 1/2 0.76 11/16 0.25 0.66 11/16 2.28 2.57
View Complete Details

Tube Cap

Note :
Dimension l1, c, d is shown in the finger-tight position.
Dimensions are for reference only and are subject to change.

 
Tubefit part no. Equivalent Part no. Type 1 Equivalent part no Type 2 ODT-ØT(INCHES) BODY HEX F C D L NUT HEX W L1
1-TCD -100-C 1BLEN1 1/16  7/16  0.43  0.34  0.44  5/16  0.59 
2-TCD -200-C 2BLEN2 1/8  7/16  0.60  0.50  0.53  7/16  0.79 
3-TCD -300-C 3BLEN3 3/16  7/16  0.63  0.54  0.58  7/16  0.84 
4-TCD -400-C 4BLEN4 1/4  9/16  0.70  0.60  0.63  9/16  0.92 
5-TCD -500-C 5BLEN5 5/16  5/8  0.73  0.64  0.67  5/8  0.96 
6-TCD -600-C 6BLEN6 3/8  11/16  0.76  0.66  0.72  11/16  1.01 
8-TCD -810-C 8BLEN8 1/2  7/8  0.86  0.90  0.75  7/8  1.15 
10-TCD -1010-C 10BLEN10 5/8  0.86  0.96  0.78  1.18 
12-TCD -1210-C 12BLEN12 3/4  1-1/8  0.86  0.96  0.84  1-1/8  1.24 
14-TCD -1410-C 14BLEN14 7/8  1-1/4  0.86  1.02  0.94  1-1/4  1.34 
16-TCD -1610-C 16BLEN16 1-1/2  1.04  1.23  1.03  1-1/2  1.51 
View Complete Details

Tube Socket Weld Union

Tubefit tube fittings with weld ends allow you to make tube-to-weld connections. The fittings provide leak-proof seals at thetubing connections. They also eliminate costly, hazardous leaks in instrumentation and process tubing. They permit disassemblyin otherwise permanently welded tubing systems.materials include 316/316l stainless steel, steel, brass and aluminium.
Note :
The E dimension is the minimum opening & fittings of this group may be back drilling to lager id at pipe thread or straight thread end.
Dimension l, c, d is shown in the finger-tight position.
Dimensions are for reference only and are subject to change.

 
Tubefit part no. Equivalent Part no. Type 1 Equivalent part no Type 2 TUBE ODQT (INCHES) BODY HEX F ØT1 C Ø E L NUT HEX W D L1
2-TSWUD -200 - 6 - 2W 2 -2 ZHLW 1/8 7/16 0.31 0.6 0.09 1.14 7/16 0.5 0.25
3-TSWUD -300 - 6 - 3W 3 -3 ZHLW 3/16 7/16 0.42 0.63 0.12 1.17 1/2 0.54 0.25
4-TSWUD -400 - 6 - 4W 4 -4 ZHLW 1/4 1/2 0.44 0.7 0.19 1.32 9/16 0.6 0.31
6-TSWUD -600 - 6 - 6W 6 -6 ZHLW 3/8 5/8 0.62 0.76 0.28 1.48 11/16 0.66 0.38
8-TSWUD -810 - 6 - 8W 8 -8 ZHLW 1/2 13/16 0.75 0.86 0.41 1.62 7/8 0.9 0.5
10-TSWUD -1010 - 6 - 10W 10 -10 ZHLW 5/8 15/16 0.92 0.86 0.5 1.65 1 0.96 0.5
12-TSWUD -1210 - 6 - 12W 12 -12 ZHLW 3/4 1-1/16 1.05 0.86 0.62 1.71 1-1/8 0.96 0.56
16-TSWUD -1610 - 6 - 16W 16 -16 ZHLW 1 1-3/8 1.31 1.04 0.88 2.07 1-1/2 1.23 0.75
View Complete Details

Gauge Snubber

Features :
Gauge Snubber fittings protects pressure gaugesand instruments from system pressure surges andshock. Pressure damping (snubbing) is accomplishedthrough the use of a porous sintered SS 316 element.When snubber is installed up stream from apressure instruments , the response rate of theinstrument is reduced and generally varies with the initial pressure drop across the porous metalelement, and allows the instrument to smoothlycome to line ressure.
Heat code traceability
Technical Specification :
Size : 1/4"F x 1/4"M1/2"F x 1/2"M1/4"F x 1/8"M1/2"F x 1/4"M1/2"F x 3/8"M
End Connection : NPT, BSP, BSPT, or as per customer requirement.
Working Pressure : 5000 Psi (344Bar)
Temperature Rating : BRASS 400 Deg F (204 Deg C)SS 316 1000 Deg F (538 Deg C)
Material of construction : SS 316, SS 304, Brass, Monel
Optional Sour Gas service valves are available confirming to NACE Std. MR - 01 - 75
All Snubbers are 100% Factory tested prior to shipment.
Application :
Refineries, liquid patroleum gas processing plant, petro-chemical plants, systems difficult toshur off due to solid contents dust, rust, dirt etc.
Testing :
Pneumatic Seat test is performed at 1/4 of workingpressure.
Hydrostatic shell test is performed at 1.5 times theworking pressure.
View Complete Details

Vent Protector

TUBEFIT vent protectors, or more commonly known as the mud dauber fittings, protect open ends of instruments, tubing, outlet vents and bleed-off lines.The mesh wire screen prevents foreign particles such as mud dauber insects from entering and clogging various systems and causing damage.
Standard materials are brass and stainless steel. Additional materials, sizes and fitting configurations are available on request.
Note :
The E Dimension is the minimum opening.
Dimensions are for reference only and are subject to change.
NPT thread as per ANSI B 1.20.1

Tubefit part no. Equivalent Part no. Type 1 Equivalent part no Type 2 NPT MALE PIPE SIZE P Ø E BODY HEX F L
4N-VPD MS-MD-4M 4MDF-SS 1/4  0.28  9/16  0.78 
6N-VPD MS-MD-6M 6MDF-SS 3/8  0.41  11/16  0.81 
8N-VPD MS-MD-8M 8MDF-SS 1/2  0.50  7/8  1.03 
12N-VPD MS-MD-12M 12MDF-SS 3/4  0.72  1-1/16  1.06 
16N-VPD MS-MD-16M 16MDF-SS 0.94  1-3/8  1.31 
 
View Complete Details

Street Light Cut Outs

Description :
TUBEFITstreet lightning cut outs in Sheet Steel construction have been specially designed, keeping in view the application & climatic conditions in the Gulf region.
Features :
Street lightning cut outs are manufactured with precision, out of extra thick, best quality CRCA steel sheets, galvanised & powder coated for smooth finish and protection against all types of atmosphere.
The CUT OUTS are tested & approved as per IP 44 & IP 54.
Specially small size cut outs are made for 4.5 mtr earth pole.
View Complete Details

Aluminium Clad Steel Wire

  • Conductivity Tensile Strength
  • 20.3% IACS 1, 340 N/min2max.
  • 27% IACS 1, 080 N/min2max.
  • 30% IACS 880 N/min2max.
  • 40% IACS auf nachfrage 680 n/min2
Description :

ACS = (Aluminium Clad Steel) is a high strength steel wire with a thick aluminium coating.
Aluminium Clad Steel (ACS) wire consists of a central steel core with a layer of highconductivity aluminium extruded over it. The aluminium layer forms a seamless metallurgical tie with the steel wire to guarantee permanent bonding during rewinding and stranding.
The aluminium layer thickness is atleast 10% of the wire radius and approximately 25% of the cross-sectional area. Conductivity is proportional to the aluminium layer thickness. Conductivities ranging from 20% to 40% IACS are available.
Aluminium Clad Steel cable is well known for its combination of corrosion resistance, high strength and superior electrical conductivity. These properties make it an excellent choice either as overhead static wire (ground wire, OPGW) It can also be used as core in ACSR conductors.

ASTM B52 10
ASTM B52-10 (2007) ASTM Standard specification for Aluminum-Clad Steel Wire, Aluminum Conductors, Aluminum-Clad Steel Reindorced.
ASTM B502
This specification covers round, aluminum-clad steel core wire used for mechanical reinforcementin the manufacture of aluminum conductors, aluminum-clad steel reinforced. The base metal shall be steel produced by the openhearth, electric furnace, or basic-oxygen.
Applications :
Higher mechanical tensile strength
Higher continuous tensile strength
Higher conductivity
Reduction of performance losses
Less weight
Less sag
Retains strength

Item Tensile Strength Coefficient of Linear Expansion Modulus of Elasticity Applied Condustors
Galvanized INVER Wire 105~110 2.8 16,500 STACIR
Al-clad INVER Wire 105~110 3.7 15,500 STACIR/AW
High-Strength Al-clad Inver Wire 120~125 3.7 15,500 Hi-STACIR/AW
View Complete Details

Cable Glands

Description :
TUBEFIToffers cable Glands with almost every specification and in most available version used globally. Virtually BIAX is synonymous withGLAND MASTER
Product Range :
G-ALCO Gland PG Gland, CIEL Gland
Special Type / Explosion Proof Gland
Wiping & Weather Proof Gland
Material :
Brass, Stainless Steel, Aluminium
Threads :
Metric, Imperial, NPT, PG
Finish :
Natural, Tin Plating
Standards :
BS 6121 : PART 1 ; BS 5501 : PART 1, 6 BS 3643, BS 1474
Special Feature :
Flame Proof & Weather Proof
A1 / A2 & BW Gland, CW, E1W Gland
Applications :
Suitable for Armoured, Unarmoured, Plastic or Rubber Sheathed Cables.
Suitable for most Indoor & Outdoor applications, Suitable for Hazardous environments
Flame proof increased safety application.
View Complete Details

Brass Fittings

Description :
We manufactures all kinds of items made from Brass, Copper, Ferrous & Non Ferrous material as per customers requirements.
Precision Components :
Rivetting, Control Valves, Electricals
CPVC Fittings :
CPVC Pipes and Fittings, Compression Fittings, Fluidics, HVAC house & Pipe fittings.
Switch Board Hardware :
Distribution Board, Switch Boards.
View Complete Details

Earthing Equipments

Description :
TUBEFIThas very comprehensive range on Earthing System, Earth Rod Accessories, Air Terminal Accessories, Junction & Test - Clamps.

TUBEFITalso specialises in Copper Conductors, Bare Copper Tape, Coated Copper Tape, Solid conductor as well as Aluminium Earthing System & Accessories.
Product Range :
Copper Bonded Earth Rod, Solid Copper Rod, Earth Road Accessories, Solid Copper Conductors, Copper Tape, Aluminium Tape
Material :
Brass, Copper, Aluminium, Gun Metal
Standards :
BS 970, BS 125, BS 6360, BS 1432, BS 2898, DIN 48801
Applications :
High Rise Buildings, Commercial Complexes, Industrial Installation, Air Port, Hotels, Hospitals etc
View Complete Details

Flexible Conduits

Description :
TUBEFITflexible conduits management systems offers a cost effective solutions for both New Build & Refurbishment Contracts.
Product Range :
BMC / BMC 1 / BMC 2 Flexible Conduits Galvanised & S.S. Bare Metal Conduits, Brass Adaptors
Standards :
BSEN 50086 2 3, BS 731 (Part 1)
Rigid Conduits :
TUBEFITsRigid Metal Conduits & Accessories offers a wide range to meet any demands.
Product Range :
Heavy gauge conduits Welded Screwed, Circular Boxes-small, Large, Deep Rectangular, Adaptors, Elbows, Bends, Accessories.
Standards :
BS 31, BS 4568, BS 6053, BS 6099
View Complete Details

Bulk Head Lock Nut

Note :
Dimensions are for reference only and are subject to change.
Sae/ms(unef)thread as per asme b1.1

 
Tubefit part no. Equivalent Part no. Type 1 Equivalent part no Type 2 ODT-ØT BODY HEX F L
1- BUND-SM 102-61 1WLZ 0.0625 5/16 0.13 
2- BUND-SM 202-61 2WLZ 0.125 1/2 0.19 
3- BUND-SM 302-61 3WLZ 3/16 9/16  0.22 
4- BUND-SM 402-61 4WLZ 0.25 5/8  0.22 
5- BUND-SM 502-61 5WLZ 5/16  11/16  0.23 
6- BUND-SM 602-61 6WLZ 0.375 3/4  0.25 
8- BUND-SM 812-61 8WLZ 1/2 15/16  0.28 
10- BUND-SM 1012-61 10WLZ 5/8  1.1/16  0.31 
12- BUND-SM 1212-61 12WLZ 3/4  1.3/16  0.34 
14- BUND-SM 1412-61 14WLZ 0.875 1.3/8  0.38 
16- BUND-SM 1612-61 16WLZ 1 1.5/8  0.38 
View Complete Details

O Seal Lock Nut

Note :
Dimensions are for reference only and are subject to change.
Sae/ms(unef)thread as per asme b1.1

 
Tubefit part no. Equivalent Part no. Type 1 Equivalent part no Type 2 L NUT HEX W Thread size sae/ms
2-MOSMD-OSM --------------------------- 2L5N 0.22 7/16 5/16x24
3-MOSMD-OSM --------------------------- 3L5N 0.22 1/2 3/8x24
4-MOSMD-OSM --------------------------- 4L5N 0.25 9/16 7/16x24
5-MOSMD-OSM --------------------------- 5L5N 0.25 5/8 1/2x20
6-MOSMD-OSM --------------------------- 6L5N 0.27 11/16 9/16x18
8-MOSMD-OSM --------------------------- 8L5N 0.31 7/8 3/4x16
10-MOSMD-OSM --------------------------- 10L5N 0.36 1 7/8x14
12-MOSMD-OSM --------------------------- 12L5N 0.41 1.1/4 1.1/16x12
14-MOSMD-OSM --------------------------- 14L5N 0.41 1.3/8 1.3/16x12
16-MOSMD-OSM --------------------------- 16L5N 0.41 1.1/2 1.5/16x12
View Complete Details

CHEMICAL INJECTION QUILL

Technical Specification :
Size : As per client requirement
Maximum Working Pressure : 3000 PSIG The body and stinger are both constructed of chemical resistant alloys
View Complete Details

Cable Lugs

Description :
TUBEFITproduces a very comprehensive range of Tubular Cable Terminal Ends.
Product Range :
Crimping type Tubular Terminal Ends
Crimping type Tubular In Line Connectors
Tubular Cable Lugs with Insulation, Splices
Ring type with / without insulation
Fork Type with / without Insulation
Reducer type Terminal Ends
Mechanical Lugs
Material :
Copper, Aluminium
Finish :
Electrolytic Tinned Plating
Standards :
BS STD., DIN 48085, DIN 46228, UL 486
Special Feature :
Bl METTALIC
Applications :
High Rise Buildings, Commercial Complexes, Industrial Installation, Air Port, Hotels, Hospitals etc.
View Complete Details

Allen Plug

We are offering allen plug.
View Complete Details

Air Header

We are offering air header.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us