EMPOWER from Trinity is an electrical power meter, for use in three phase three/four wire electrical systems. It measures the phase voltages, currents, PF, Hz, system KVA, system KW, system KVAr, Active Energy (KWh) and Apparent Energy (KVAh). The various parameters measured are displayed on a 4 digit x 3 Row Red 7 segment LED matrix for easy visibility and readability. The CT ratio (primary) can be programmed at site using the front membrane key. The meter uses state of the art Digital Signal Processing (DSP) circuitry to achieve very high accuracy measurement of true RMS value of all above parameters. The meter accuracy is class 1.0 for all parameters including KWh. Â Features Multiparameter monitoring. Measures 16 Electrical values. All parameters with default accuracy class 1.0 Compact 96 x 96x 55 mm DIN enclosure. Bright, easy to read 7 segment LED matrix. Micro-controller based. Parameters Displayed V, A, KWh, KVAh, KW, KVA, KVAR, PF, Hz. Specifications Direct Voltage Input : Up to 300V L-N Burden 0.5VA Direct Voltage Input : Up to 500V L-L Burden 0.5VA Secondary Current Input: 5A or 1A (To be specified at the time of Ordering) CT Primary : Site Selectable Range of Reading : 5 - 5000A Burden : Overload (Through CT) : 5A CT = 6A RMS Continuous 1A CT = 1.2A RMS Continuous (Whole Current) : 120% of Imax continuous. Frequency : 45 to 55 Hz Accuracy : 0.3% of Reading Three Energies Range of Reading : 0 to 9999999.9 Accuracy : 1.0S as per IS 13779. System PF Accuracy : 1% of Reading (IPFI>0.5) Range of Reading : 0.05 to 1.00 Lag/Lead System KVA, KW & KVAR Accuracy : 1.0% of Reading Display : 0.56 Red Seven Seg. Communication: RS485 Port with EMS / SCADA using Modbus-RTU protocol. Enclosure : 96X96X55 mm Micro-controller based.