TheFacing head is integrated into the headstock above the Main Spindle.The Position of the Facing Head is important in context of covering the diameter range. The Main Spindle slides inside the headstock, allowing the Facing head to rotate for its full range from Zero to Maximum diameter of its Model designed. The U axis travel varies for each Model. Please see the Technical sheet for details. The Facing diameter of the U axis slide is controlled by CNC command. The slide has more than one tool mounting positions from Model DS 450 for diameter flexibility this helps to cover the entire Range of the Diameters from minimum to Maximum diameters and Tools are loaded automatically from the tool magazine to one of thefirst or secondor thirdmounting positions. The Tool mounted on Facing Head can be used for single-point facing, boring, turning and threading operations. Standard tooling is employed at any programmed diameter to rough and finish complex internal and external profiles. Extra-large tools can be loaded automatically from a tool rack or spare pallet station, such as very long and heavy angle head attachments. The turning speed is fully programmable with constant surface speed control as on a conventional CNC lathe. Standard flood coolant comes from the nozzles at the top of the headstock, but as an extra option, coolant is supplied through the facing head and any of the tool holders directly to the tool insert, which greatly improves tool life and surface finish.Due to the growing demand of Surface Finish inside the bores under options is available Coolant through Facing Head.
Delhi, India
