This machine has six shafts log roll tape slice cutting machine. It has a turret exchange system, suitable for high-speed slice cutting log rolls of BOPP packing tape, PVC Insulation tape, Masking tape, Double-sided tape, Duct tape, Aluminium foil tape, etc.

This machine can cut the Max-width of 1300mm, Maximum diameter of the roll can be 140mm. The smallest possible width of cutting is 2mm. The Cutting Speed of the machine is about 35cuts/min. The cutting position accuracy is 50 microns. The inner diameter of the paper tube is 76mm. This is a very cost-effective high production machine.

This kind rewinding machine is also Suitable for bopp, masking, electrical tape, foamtape, cloth tape, double sided. duct tape, PE, PET, PVC, kraft paper tape, non woven, papers etc jumbo rolls rewind.

Automaticlengthsetting:thetwo steplengthcounterprovidesaccuraterewindinglengthcontrol.

Oncethesetlengthisreached, servomotorisadoptedsothattheshaftwillinstantlyandautomaticallychanges, ensuringeasyoperationandefficientperformance.

Features :

• Main driving part: Taiwan AC motor with inverter is employed.
• Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
• Operating panel: All functions are operated on the 10" LCD touch panel.
• Motor control system: The central control system is PLC programmable controller.
• Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
• Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
• Auto angle adjustment of circular blade: Mitsubishi servo motoris used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is 8).
• Auto exchange device: cylinder-driven position spline gear is used to ensure fast & precise exchange; non-stop machine to save material loading & unloading time and improve efficiency.
• Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.

It is used for the adhesive tape, protective film, fabric, non woven, so on roll stock materials.

Feature:

1. With full-manual cutting and simple operation, it has great cutting efficiency.

2. Circular blade cutting and pneumatic blade feeding are employed to ensure smooth cutting surface.

3. Its equipped with cutting width gauge for quick and stable positioning.

4. With small volume and simple maintenance, it's economical and efficient.

Main Technical Parameters:

effective width 1300mm, 1600mm

max. cutting diameter 150mm other size as the customer request.we can made.

cutting width 3-1600mm

I.D. of paper core 3", 6''

We welcome the OEM service, we can make the nonstandard machine according to our customer different material and different size. Example: change the diameter of the knife, change the width, and also for this machine, we also can make the semi automatic type for the servo motor control.

Tape rewinding machine and Slicing machine for masking tape. For BOPP tape , double side tape, masking tape, kraft tape, cloth tape, foam tape on all kinds of adhesive tape rewinding.

Characteristics:

1. Two-section of electronic counter to control the length of material accurately, Auto returning to zero.

2. Magnetic powder type winding control; rewinding smoothly ; easy to control.

3. Semi-Automatic Cutting machinery is used for the splitting of sticker, double-side tape, masking tape, BOPP tape and so on.

4. Semi-Automatic Cutting Machine has pneumatic rotary blade for splitting, pneumatic disc feed and tail stock (the tail stock is designed with protection device for inadequate air pressure.), PE rubber tubes are designed on the main cutting shaft for disc protection so as to avoid damaging the blade. The precise splitting length depends on locating shafts, which is hexagonal shaft.

Maximum width of the raw material: 1300 mm

Maximum diameter of the raw material: 600 mm

Minimum width of slitting: 3 mm

The diameter of the paper core: 3 inch

Working voltage: 415V 50HZ

Power: 1.5KW

The most cost effective machine is Double Shaft PVC Tape Cutting Machine, in the range of all cutting / slicing machines. The log rolls are generally, in 1300mm length, and core diameter is 40 or 30 mm. The shaft size is week compared to the length of the shaft. It bends with the cutting pressure applied on it while cutting PVC tapes. We provide back up rolls with a moving carriage to the shaft so the shaft does not bend and the PVC tape cutting is of high quality.

This an automatic machine and production capacity is 3 sec for 1 cut, you cut total 40 rolls per min. so we recommend the double shaft PVC Tape Cutting Machine.

The most cost effective machine is Double Shaft PVC Tape Cutting Machine, in the range of all cutting / slicing machines. The log rolls are generally, in 1300mm length, and core diameter is 40 or 30 mm. The shaft size is week compared to the length of the shaft. It bends with the cutting pressure applied on it while cutting PVC tapes. We provide back up rolls with a moving carriage to the shaft so the shaft does not bend and the PVC tape cutting is of high quality.

This an automatic machine and production capacity is 3 sec for 1 cut, you cut total 40 rolls per min. so we recommend the double shaft PVC Tape Cutting Machine.

Features :

• Main driving part: Taiwan AC motor with inverter is employed.
• Central control unit: programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
• Operating panel: all functions are operated on the 10.4" Taiwan EVIEW LCD touch panel.
• Motor control system: the central control system is PLC programmable controller.
• Cutting positioning system: cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
• Blade feeding positioning system: blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
• Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is 8).
• Quick shaft change system: three kinds of shafts are available and quick change of shafts is applied for different materials.

This machine is mainly designed for the foam tapes.Characteristics: LCD touch screen PLC automation control system Can be assembled with straight knife: 190200.9mm Maximum feed width: 1.35M Maximum cutting diameter: 85-350mm Minimum cutting width: 5mm Positioning accuracy: 0.05mm Cutting shaft specifications: 3 inches Dimensions: 2200*1000*1100mm Voltage: 415 (V) Weight: 300 (KG) Total power: 2.2 (KW)

DESCRIPTION:

Tape Slicing machine for masking tape, for BOPP tape, double side tape, kraft tape, cloth tape, foam tape.

Characteristics:

HMI touch screen

PLC automation control system

Feed servo motor: 1 (KW)

Can be equipped with a round knife: 300

Maximum feed width: 1.35M

Maximum cutting diameter: 220mm

Minimum cutting width: 1mm

Positioning accuracy: 0.05mm

Cutting shaft specifications: 3 inches

Dimensions: 2300*1000*1100mm

Voltage: 415 (V)

Weight: 360 (KG)

Total power: 4.8 (KW)

4 Shaft rewinding turret with 2 shafts rotating and 2 shafts stationery.

Touch screen control panel and PLC to control, high speed with accuracy.

Unwind & Rewind tension controlled by brake and slip clutch automatically.

Application : For slitting/rewinding BOPP adhesive tapes

Working Width : 1300mm 1600mm

Machine Speed : 0-250 Meter/min

Unwind Diameter : Max. 700mm O.D.

Rewind Diameter : Max. 140mm O.D.

Paper Core Diameter : 3 (76mm)

Slitting Width : Min. 48mm

Blade : 0.2X22X66 mm

Power: 10 Kw

This machine has six shafts log roll tape slice cutting machine. It has a turret exchange system, suitable for high-speed slice cutting log rolls of BOPP packing tape, PVC Insulation tape, Masking tape, Double-sided tape, Duct tape, Aluminium foil tape, etc.

This machine can cut the Max-width of 1300mm, Maximum diameter of the roll can be 140mm. The smallest possible width of cutting is 2mm. The Cutting Speed of the machine is about 35cuts/min. The cutting position accuracy is 50 microns. The inner diameter of the paper tube is 76mm. This is a very cost-effective high production machine.

This kind rewinding machine is also Suitable for bopp, masking, electrical tape, foamtape, cloth tape, double sided. duct tape, PE, PET, PVC, kraft paper tape, non woven, papers etc jumbo rolls rewind.

Automaticlengthsetting:thetwo steplengthcounterprovidesaccuraterewindinglengthcontrol.

Oncethesetlengthisreached, servomotorisadoptedsothattheshaftwillinstantlyandautomaticallychanges, ensuringeasyoperationandefficientperformance.

Features :

• Main driving part: Taiwan AC motor with inverter is employed.
• Central control unit: Programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
• Operating panel: All functions are operated on the 10" LCD touch panel.
• Motor control system: The central control system is PLC programmable controller.
• Cutting positioning system: Cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
• Blade feeding positioning system: Blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
• Auto angle adjustment of circular blade: Mitsubishi servo motoris used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is 8).
• Auto exchange device: cylinder-driven position spline gear is used to ensure fast & precise exchange; non-stop machine to save material loading & unloading time and improve efficiency.
• Quick shaft change system: Three kinds of shafts are available and quick change of shafts is applied for different materials.

It is used for the adhesive tape, protective film, fabric, non woven, so on roll stock materials.

Feature:

1. With full-manual cutting and simple operation, it has great cutting efficiency.

2. Circular blade cutting and pneumatic blade feeding are employed to ensure smooth cutting surface.

3. Its equipped with cutting width gauge for quick and stable positioning.

4. With small volume and simple maintenance, it's economical and efficient.

Main Technical Parameters:

effective width 1300mm, 1600mm

max. cutting diameter 150mm other size as the customer request.we can made.

cutting width 3-1600mm

I.D. of paper core 3", 6''

We welcome the OEM service, we can make the nonstandard machine according to our customer different material and different size. Example: change the diameter of the knife, change the width, and also for this machine, we also can make the semi automatic type for the servo motor control.

Tape rewinding machine and Slicing machine for masking tape. For BOPP tape , double side tape, masking tape, kraft tape, cloth tape, foam tape on all kinds of adhesive tape rewinding.

Characteristics:

1. Two-section of electronic counter to control the length of material accurately, Auto returning to zero.

2. Magnetic powder type winding control; rewinding smoothly ; easy to control.

3. Semi-Automatic Cutting machinery is used for the splitting of sticker, double-side tape, masking tape, BOPP tape and so on.

4. Semi-Automatic Cutting Machine has pneumatic rotary blade for splitting, pneumatic disc feed and tail stock (the tail stock is designed with protection device for inadequate air pressure.), PE rubber tubes are designed on the main cutting shaft for disc protection so as to avoid damaging the blade. The precise splitting length depends on locating shafts, which is hexagonal shaft.

Maximum width of the raw material: 1300 mm

Maximum diameter of the raw material: 600 mm

Minimum width of slitting: 3 mm

The diameter of the paper core: 3 inch

Working voltage: 415V 50HZ

Power: 1.5KW

The most cost effective machine is Double Shaft PVC Tape Cutting Machine, in the range of all cutting / slicing machines. The log rolls are generally, in 1300mm length, and core diameter is 40 or 30 mm. The shaft size is week compared to the length of the shaft. It bends with the cutting pressure applied on it while cutting PVC tapes. We provide back up rolls with a moving carriage to the shaft so the shaft does not bend and the PVC tape cutting is of high quality.

This an automatic machine and production capacity is 3 sec for 1 cut, you cut total 40 rolls per min. so we recommend the double shaft PVC Tape Cutting Machine.

The most cost effective machine is Double Shaft PVC Tape Cutting Machine, in the range of all cutting / slicing machines. The log rolls are generally, in 1300mm length, and core diameter is 40 or 30 mm. The shaft size is week compared to the length of the shaft. It bends with the cutting pressure applied on it while cutting PVC tapes. We provide back up rolls with a moving carriage to the shaft so the shaft does not bend and the PVC tape cutting is of high quality.

This an automatic machine and production capacity is 3 sec for 1 cut, you cut total 40 rolls per min. so we recommend the double shaft PVC Tape Cutting Machine.

Features :

• Main driving part: Taiwan AC motor with inverter is employed.
• Central control unit: programmable central control is used and 20 sizes can be set on the same shaft for auto transfer and cutting.
• Operating panel: all functions are operated on the 10.4" Taiwan EVIEW LCD touch panel.
• Motor control system: the central control system is PLC programmable controller.
• Cutting positioning system: cutting positioning is controlled by Mitsubishi servo motor. The imported high precision ball screw is applied to set the size and the linear slide rail is to bear the load of the cutter seat.
• Blade feeding positioning system: blade feeding is controlled by Mitsubishi servo motor, and the cutting speed is adjustable in three stages.
• Auto angle adjustment of circular blade: Mitsubishi servo motor is used to calculate the circular blade angle and the angle change is subject to different materials (the angle change range is 8).
• Quick shaft change system: three kinds of shafts are available and quick change of shafts is applied for different materials.

This machine is mainly designed for the foam tapes.Characteristics: LCD touch screen PLC automation control system Can be assembled with straight knife: 190200.9mm Maximum feed width: 1.35M Maximum cutting diameter: 85-350mm Minimum cutting width: 5mm Positioning accuracy: 0.05mm Cutting shaft specifications: 3 inches Dimensions: 2200*1000*1100mm Voltage: 415 (V) Weight: 300 (KG) Total power: 2.2 (KW)

DESCRIPTION:

Tape Slicing machine for masking tape, for BOPP tape, double side tape, kraft tape, cloth tape, foam tape.

Characteristics:

HMI touch screen

PLC automation control system

Feed servo motor: 1 (KW)

Can be equipped with a round knife: 300

Maximum feed width: 1.35M

Maximum cutting diameter: 220mm

Minimum cutting width: 1mm

Positioning accuracy: 0.05mm

Cutting shaft specifications: 3 inches

Dimensions: 2300*1000*1100mm

Voltage: 415 (V)

Weight: 360 (KG)

Total power: 4.8 (KW)

4 Shaft rewinding turret with 2 shafts rotating and 2 shafts stationery.

Touch screen control panel and PLC to control, high speed with accuracy.

Unwind & Rewind tension controlled by brake and slip clutch automatically.

Application : For slitting/rewinding BOPP adhesive tapes

Working Width : 1300mm 1600mm

Machine Speed : 0-250 Meter/min

Unwind Diameter : Max. 700mm O.D.

Rewind Diameter : Max. 140mm O.D.

Paper Core Diameter : 3 (76mm)

Slitting Width : Min. 48mm

Blade : 0.2X22X66 mm

Power: 10 Kw