Transcreek Chemicals Pvt. Ltd.

Kopar Khairane, Navi Mumbai, Maharashtra

Refractory Mortars are finely ground refractory materials which become plastic when mixed with water. Theses are used to bond the brickwork into solid unit, to provide cushion between the slightly irregular surfaces of the brick, to fill up spaces created by a deformated shell, and to make a wall gas tight to prevent penetration of slag into the joints.

Thermal rockwool mattress are designed for various applications in Ducts and Vessels equipment, and wherever there are irregular and uneven curved surfaces. They conform to ASTM C-553 and ASTM C-665 and come in flexible form with or without facings. To suit your requirements, we will configure them accordingly.

Size 4x6x12.5mm regular boards Gypsum Board.-calcium sulfate dihydrate (gypsum) with or without additives and normally pressed between a facer and a backer (typically thick sheets of paper). It is used to make interior walls and ceilings. Size 4x6x12.5mm regular boards mostly kept

CERVAC BOARDS are rigid products made from Fiberfrax ceramic fibre which is vacuum formed with organic and inorganic binders, with or without mineral fillers. These are manufactured over a wide range of grades densities and hardnesses. These boards may be used as individual component of furnace linings or as hard hot face layer for Durablnkets or as backup insulation. SHAPES :By vacuum forming, a wide range of sizes and forms such as cones, sleeves, floats, observation door tiles etc.

The Fibrefrax, Durablanket Family of lightweight needled blankets are manufactured from Fiberfrax refractory ceramic fibres and provide effective solutions to a wide spectrum of thermal management problems Crude Oil, Refonner 8. Pyrolysis heater linings.High temp. pipe, duct & turbine insulation.Tube seals, Gaskets & Expansion joints.Heat treatment furnaces, Reheating furnaces, Soaking pit cover sealing.

Ceramic Paper provides excellent insulation properties, including low thermal conductivity and heat storage. They are widely used in various heat processing applications , as they are lightweight and thermally very efficient.
Ceramic Paper features good resistance to tearing, high flexibility, very low thermal conductivity and resistance to thermal shock. They are recommended for applications including parting plane in refractory linings, thermal and electrical insulation and expansion joints. Other applications include combustion chamber lines and hot top lining.

Insulation pins and washers in different lengths with threading and without threading s Made in GI, SS 304 and SS316 .

Fiberglass mattress is designed can be used for different applications in ducts, vessel equipment, and wherever there are irregular and uneven curved surfaces. It conforms to BS 476, ASTM E 84 and ASTM E 136 in flexible form, with or without facings, and can be configured to suit your requirements.

Thermal rockwool slabs are designed for various applications in ducts, vessel equipment, and wherever flat and slightly curved surfaces need to be insulated. They conform to ASTM C-553 and ASTM C-665, and are available in rigid or semi-rigid form, with or without facings. To meet your requirements, we will configure them accordingly.

Hilux range of Patterned Tiles is a novel innovation in the world of interiors and exhibits all the core properties of calcium silicate boards. It is available in 595 x 595 mm 610 x 610 mm & 595 x 1195 mm 610 x 1220 mm sizes with different designs and thicknesses. These tiles impart an exquisite appearance to the building interiors along with functional benefit of noise reduction. Unlike molded tiles, Hilux tiles are very strong and durable.

In the layered construction ( Blanket, Board and Moist Pack) the anchors are exposed to hot face temperature and are limiting factors for use of ceramic fiber in high temperature applications. To overcome this limitation, Modules are used.

Foamglass Cellular glass insulation is a lightweight, rigid material composed of millions of completely sealed glass cells. Foamglass Cellular glass insulation is manufactured in a block form and then fabricated into a wide range of shapes and sizes to satisfy industrial and commercial insulation requirements. Foamglass Cellular glass insulation has a homogeneous, closed cell glass structure that resists moisture in both liquid and vapor forms and results in long term, constant insulating efficiency. Foamglass Cellular glass insulation is 100% glass and contains no binders or fillers it cannot burn. It will not absorb flammable liquids or vapors. If a facility fire occurs, Foamglass Cellular glass insulation can help protect people and equipment by aiding in the containment or suppression of the flames.

The Fibrefrax, Durablanket Family of lightweight needled blankets are manufactured from Fiberfrax refractory ceramic fibres and provide effective solutions to a wide spectrum of thermal management problems

HYSIL calcium silicate from HIL, India is suitable for thermal insulation in furnace, cave dwelling of steel mill, petrochemical, ceramics, glass, cement industries and power industries as well as other various ancillary heating equipment. The main constituents of HYSIL calcium silicate is xonotlite and reinforced glass fiber, no asbestos. It is a kind of high efficient energy-saving material with temperature limited 800C -1100C . Characterised by low bulk density, high specific strength, superior heat resistance, outstanding thermal insulation, excellent durability, chemical corrosion resistance, easy to be cut by saw and easy installation, calcium silicate can be widely used for the insulation of industrial kiln.

We make available high quality Acid Resistant Bricks in various grades.We are situated in Navi Mumbai(India) and our well-developed network assists us in meeting the exact requirements of the clients. Capitalizing on an efficient industrial network, our organization has made coalitions with numerous reputed logistics solution sources. Thus, we can ensure on time distribution of consignments.

We are involved in suppl of Chrome Magnesite Bricks. These bricks are mainly used as chequer bricks of the regeneration zone. These bricks find use in various applications like rotatory kiln, furnaces and open hearth. They have high anti-erosion ability, and optimum resistance.

STPP is a colourless salt, which exists both in anhydrous form and as the hexahydrate. STPP is consumed as a component of commercial detergents. It serves as a "builder, " industrial jargon for a water softener. Its key function is that it allows surfactants to work at their full potential. Also, it prevents deposition of soil and acts as a pH buffer. It softens detergent water and can be used as a water treatment, as well.

Hilux range of Patterned Tiles is a novel innovation in the world of interiors and exhibits all the core properties of calcium silicate boards. It is available in 595 x 595 mm 610 x 610 mm & 595 x 1195 mm 610 x 1220 mm sizes with different designs and thicknesses. These tiles impart an exquisite appearance to the building interiors along with functional benefit of noise reduction. Unlike molded tiles, Hilux tiles are very strong and durable.

We Are Exporters of a Superior range of High Nickel Alloys & Stainless Steel Refractory Anchors used in Industrial Furnaces and various other Equipments. The manufacturing range of Refractory Anchors includes Industrial Refractory Anchors, Monolithic Anchor, Furnace Anchor, Refractory Anchors, Ceramic Fiber Lining Studs with Washers, Ceramic Anchors, Anchors for Fibre, Brick Anchors, Support Brackets, Brick Holders & Hook, Anchor for Castables, Spiral V- Type Anchors, V Type Anchors, Y Type Anchors & Customized Refractory Anchors.