Toyo Bearing Pvt. Ltd.

Navrangpura, Ahmedabad, Gujarat

Needle bearings provide high radial load capacity in limited diametral space applications. Drawn cup full complement bearings with a maximum compliment of rollers for highest load capacity in mimnimum space.

Angular contact bearings are designed such that there is an angle between the races and the balls when the bearing is in operation. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings are typically assembled with a thrust load or preload. The preload creates a contact angle between the inner race, the ball and the outer race. The preload can be done while manufacturing the bearing or it can be done when the bearing is inserted into an application.

Deep groove, or single row radial, ball bearings are the most widely used bearings. They utilize an uninterrupted raceway that makes them optimal for radial loads .this design permits precision tolerance, even at high-speed operation.

We are offering water pump bearings.The water pump is the heart of the automotive cooling system, typically a belt-driven centrifugal pump. The pump circulates coolant throughout the system while the engine is running. If the drive belt fails, the water pump will not function. It is one of the reasons its so important to always check the status of the belt during maintenance.

We are offering sphercial roller bearings.Spherical roller bearings are dedicated to extremely severe applications and must support high loads, severe misalignment, contaminated environments, shocks, and vibrations. And with the industrys highest load rating and production coming from a factory near you, theres no reason to look anywhere else for spherical roller bearings.

We are offering tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by contact between the large end of the roller and a rib on the inner ring. This provides high capacity for radial and single thrust loads.

We are offering cylindrical roller bearings have rollers that provide a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring. This is especially important when accommodating thermal expansion, where both rings must be press-fitted.

Bearings are among the most important components in the vast majority of machines and exacting demands are made upon their carrying capacity and reliability. Therefore it is quite natural that rolling bearings should have come to play such a prominent part in textile machinery.

Slim bearing series are manufactured to industry standard sizes. The slim bearing widths and sections (distance from bore to outside diameter) in each series remains constant regardless of the change in bore diameter. Due to the large diameters and thin sections of these slim bearing products, it is necessary to address measurement and inspection techniques. To accurately measure the bore and outside diameters of thin section bearings, a specific procedure must be followed.

It has two rows of balls and a common sphered raceway in the outer ring. The bearings are consequently self-aligning and insensitive to shaft deflections and angular misalignment of the shaft relative to the housing. Additionally, self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.