Tony Cables

Waliv, Thane, Maharashtra

Tony Cables manufacturers and sells Battery Cables and Links for UPS Systems. Our supply goes to UPS System Manufacturers all over India.

Instrumentation Cables are used in process control field. It usually contains a pair of wires with a foil shield which would connect a process instrument (temperature, pressure, flow sensor etc.) to the process controller.

Tony Cablesmanufactures all types of Instrumentation cables. Our range includes Pair, Triad and Quad. These are available as armoured or unarmoured Cables with over all aluminum polyester tape and ATC drain.

Salient features:
Facilitates low attenuation to Low Level Signals from Electronic Transmitters, thus enabling its smooth communication.

Power Cable is a made of two or more electrical conductors assembled together in an overall sheath. It operates at relatively high electrical stress. It can be installed as permanent wiring, buried in the ground, run overhead or exposed.

Tony Cablesmanufactures a large range of Power Cables available in plain Annealed Copper and insulated with high quality PVC.

Salient features:

• Fire and heat resistant
• Insoluble in Oil and Water
• Available in multi core armoured construction and different sizes

Coaxial Cableis a Cable consisting of an inner conductor, surrounded by an insulating layer made from a flexible material with a high dielectric constant. It is then surrounded by another conductive layer (typically of fine woven wire for flexibility, or of a thin metallic foil), and then finally covered again with a thin insulating layer on the outside.

Tony Cables manufactures high quality coaxial cables available in different types such as RG-59, RG-6, RG-8, RG-11, RG-218, RG-58, RG-62 etc.

Salient features:

• Strong and Durable
• Flame resistant
• Available in armoured construction
• High frequency cables with low loss signal quality

Shielded Cableis a Cable with one or more insulated conductors enclosed by a common conductive layer. The shield may be composed of braided strands of copper (or other metal), a non-braided spiral winding of copper tape, or a layer of conducting polymer. Usually, this shield is covered with a jacket. The shield reduces electromagnetic radiation that may interfere with other devices.

Tony Cablesspecializes in manufacture ofFlexible Screen Cablesof various types. These Cables are available in specification of 7/36 to 25 sq. m. We can provide option of 2 core to 24 core Cable. We also manufacture screen armoured Cables, customized to clients requirements.

Flexible Cables are Cables specially designed to cope with the tight bending radii and physical stress associated with moving applications, such as inside Cable carriers.

Tony Cablesmanufactures specialist, highly Flexible Cables were developed with unique characteristics to differentiate them from standard designs. These are sometimes known as Chain-Suitable, High-Flex or Continuous Flex Cables.

Salient features:

Cables are manufactured using Annealed copper conductor with PVC insulation.

Single and Muliti-core flexible Cables manufactured as per IS-694 specifications.

The fire alarm systems use the Co-axial trunk Cables. These Cables are ideal for multi channel applications. The central conductor is made of Copper Clad Aluminum (CCA).Tony Cablesspecializes in manufacturing high quality fire alarm Cables.

Salient features:

• Can withstand high temperature. These Cables have fire retardant properties.

• The Cables are highly flexible and can withstand high degree of stretch and bend.

• Good for long duration use.

Multiplexes, Malls and high rise buildings are norm of the day. A full complement of Cables for control, connectivity, alarm, security, sound, water sprinkles, CCTV camera and building management systems are required.

A system failure due to malfunction or loss of continuity or poor workmanship of quality and material can be catastrophic. The cost of relaying will be astronomical than to the cost of initial procurement and laying. Hence our emphasis is therefore in achieving the optimum quality targets. The following are our quality management principles.

Quality must be defined as conformance to the exacting requirements not merely aesthetics.
Selection of best of raw-materials and pre-manufacturing shop - floor testing to give zero-defects performance.
Designing, processing and inter-stage checks during progressive manufacturing is the hallmark of quality.
Final product rigorous testing for quality is the motto of the companys dedication to total quality as conformance to applications.

Our ranges of Cables on building automation are following types:

Security and fire alarm Cables
Communication and control Cables 1p2p4p
CCTV camera Co-axial Cables
Audio and P.A. System Cables
Access Control & Building Management Systems

The finished products are thoroughly checked for high voltage integrity, resistivity, capacitance, inductance and other vital parameters before the professionally tangle-proof packings for transportations to the site to perform as per our established name for quality performance.

When taking connection from a Thermocouple to Instruments which are some distance away, either by Permanent Wiring or Flexible Cable, it is essentials to use materials having the same EMF output as the Thermocouple combination else spurious EMF can be generated at the junctions.

The best solution is to use leads of the same alloys as the Thermocouple. These are usually called Extension leads and are supplied as Extension lead quality, normally reffered to as KX, JX, TX, AND EX. Where this solution would be too expensive, comparatively cheaper alloys of different types from the Thermocouple combinations are used. These combinations have an EMF matched as closely as possible to the Thermocouple alloys although the EMF of the individual legs is not usually the same.

These Materials are termed as Compensating leads and generally give adequate compensation for EMFs generation junctions. Compensating Cables have, within a limited temprature range, the same Thermo Electric characteristics as the actual Thermocouple wires. Therefore, by using such Cables to interconnect between the Thermocouple connection head and the measuring instruments or cold junction compensators, the cold junction is relocated at the measuring instruments or cold junction compensators.

EXTENSION CABLES COMPOSITION OF THE ALLOYS
KX + ve Nickel Chromium
- ve Nickel Aluminuim
TX + ve Copper
- ve Copper Nickel Alloy
JX + ve Iron
- ve Copper Nickel Alloy
EX + ve Nickel Chromium
- ve Copper Nickel Alloy

COMPENSATING CABLES COMPOSITION OF THE ALLOYS
VX (KXA) + ve Copper
- ve Copper Nickel Alloy
WX + ve Iron
- ve Copper Nickel Alloy
Both VX and WX are compensating cables for KX
RX + ve Copper
- ve Copper Nickel Alloy
SX + ve Copper
- ve Copper Nickel Alloy
BX + ve Copper
- ve Copper
UX + ve Copper
- ve Copper Nickel Alloy

(UX Only used where the interconnection tempratures is in the range of 0 to + 50 degree centigrade.)
EMF as per ANSI MC 96.1 and IS 8784
Conductor material as per ANSI MC 96.1 and IS 8784.
Colour code as per various international standards.

We are offering house wire.

located in Thane, Maharashtra(India), we have garnered wide appreciation with our professional behavior and affordable prices. To ensure distribution of orders within undertook period, our organization has an outstanding supply chain system in place.

Established in Thane, Maharashtra(India), we are capable of catering to the demands of the customers within the committed time. We understand how important packaging is. Therefore, we make sure our products ate packed properly, have smudge-proof labels and are aesthetic to look to lure in more customers.

Fire Alarm Cables, Fire Alarm Security Cables, Shielded Fire Alarm Cables Tony cables is a trusted name in the domain of manufacturing premium quality Fire Alarm Cables which find their use in various fire alarm systems and security systems. The Fire Alarm Security Cables we manufacture have central conductor made of optimum quality of copper clad aluminum. They are ideal for multi channel applications. Our Shielded Fire Alarm Cables are designed in such a way to easily withstand extreme high temperatures. The cables we offer you are highly flexible and stretchable enough so as to withstand any atmospheric conditions. In addition to this the cables manufactured by us are durable and available at rock bottom prices. Besides we are one of the prime Manufactures of Fire Alarm Cables in the international market.

Our supreme quality Thermocouple Extension Cable is known as extension lead quality and is manufactured using materials having the same EMF output as the thermocouple combination. We supply the quality Multi Pair Thermocouple Extension Cables at reasonable prices so that our customers have a profitable deal. Since the employees of Tony cables lay emphasis on providing the best possible solution to the customers, we have emerged as leaders in the manufacturing of Thermocouple Extension Grade Cable. Our cables are high on durability and reliability as they are manufactured strictly according to the international standards. Additionally the company is also counted as one of the leading Thermocouple Extension Cable Manufacturers in the country.