PTFE Insulated Sleevings application is for high temperature or high frequencies or both. PTFE Sleevings possesses excellent electrical properties, which remain practically constant over a wide range of frequencies, temperature (-65 C to +260 C) and humilities and has a very low loss factor. We manufacture the PTFE Sleevings confirming to JSS-54802 specification of the Department of Defense Production, Ministry of Defence, New Delhi.

• Application : Used for electrical insulation process, Wire Harness and Component Covering
• Properties : Resistance to Fire, Chemicals, Acids, Sunlight, and Moisture.
• Range : AWG 30 to AWG 0 and ( 0.50 MM to 24.00 MM )

The PTFE Sleevings can be manufactured as per any other specific requirement on request. All the sizes may be manufactured in Black, Brown, Red, Orange, Yellow, Green, Blue, Grey and White Colors on specific instructions in the P.O.

We only used quality material in manufacturing of PTFE Tape and distribute quality produce to our consumers. We convey for our consumers PTFE tapes that are used in pipe fittings, plumbing, and Thread jointing purpose. PTFE tapes are known for their bond properties and approach in the typical volume as follows.

Our collection of Sintered & Un-sintered PTFE tapes have traditional wide acceptance in both industrial and commercial applications. Feature like high elongation, unbending to climate, outstanding dielectric properties and more, create it extremely convenient to use in difficult shapes. PTFE tapes are higher wire wrap and insulation tape for high warmth and high dielectric applications. They are also used for different mechanical applications and offer low friction and non-stick properties. Additionally, high elongation, visual transparency and outstanding resistance to UV are the key attributes of these tapes.

The properties that make PTFE ideally suited for all sealing applications include:

• Its non-wetting non-stick surface is resistant to enzymatic and microbiological attack and does not enable fungal or bacterial growth.
• Its chemically pure and inert state gives unmatched resistance to water, gases, solvents, acids, alkalis and other reactive media.
• Its lack of leach-able additives ensures no effect whatsoever on process fluids.
• Its resistance to cracking and embitterment even after long-term use.
• Its lubricity prevents the binding and sticking of pipes.
• Its retention of these properties over a very wide temperature range, from about -65C to + 260C

• RF Cable Assemblies
• Wiring Harness and Assemblies
• Electrical Equipment Wiring Harness
• Electronics Wire Harness
• Automotive Wire Harness
• Genset Wire harness
• Battery Cable Assemblies

Our wiring harness and RF Cable assemblies are used in automobiles, electrical and electronics. Made of PTFE, they are also used as connectors in various terminals. Its basically uses as an assembly.

• Used for Automotive Electrical and Electronics Equipment.
• Assembled according to customer's specifications.
• The component can be JST, AMP and MOLEX according to customer's request.
• Materials of wire and cable are comply with MIL and JSS standards.
• All kinds of our products are ROHS compliant.

PTFE Insulated Sleevings application is for high temperature or high frequencies or both. PTFE Sleevings possesses excellent electrical properties, which remain practically constant over a wide range of frequencies, temperature (-65 C to +260 C) and humilities and has a very low loss factor. We manufacture the PTFE Sleevings confirming to JSS-54802 specification of the Department of Defense Production, Ministry of Defence, New Delhi.

• Application : Used for electrical insulation process, Wire Harness and Component Covering
• Properties : Resistance to Fire, Chemicals, Acids, Sunlight, and Moisture.
• Range : AWG 30 to AWG 0 and ( 0.50 MM to 24.00 MM )

The PTFE Sleevings can be manufactured as per any other specific requirement on request. All the sizes may be manufactured in Black, Brown, Red, Orange, Yellow, Green, Blue, Grey and White Colors on specific instructions in the P.O.

We only used quality material in manufacturing of PTFE Tape and distribute quality produce to our consumers. We convey for our consumers PTFE tapes that are used in pipe fittings, plumbing, and Thread jointing purpose. PTFE tapes are known for their bond properties and approach in the typical volume as follows.

Our collection of Sintered & Un-sintered PTFE tapes have traditional wide acceptance in both industrial and commercial applications. Feature like high elongation, unbending to climate, outstanding dielectric properties and more, create it extremely convenient to use in difficult shapes. PTFE tapes are higher wire wrap and insulation tape for high warmth and high dielectric applications. They are also used for different mechanical applications and offer low friction and non-stick properties. Additionally, high elongation, visual transparency and outstanding resistance to UV are the key attributes of these tapes.

The properties that make PTFE ideally suited for all sealing applications include:

• Its non-wetting non-stick surface is resistant to enzymatic and microbiological attack and does not enable fungal or bacterial growth.
• Its chemically pure and inert state gives unmatched resistance to water, gases, solvents, acids, alkalis and other reactive media.
• Its lack of leach-able additives ensures no effect whatsoever on process fluids.
• Its resistance to cracking and embitterment even after long-term use.
• Its lubricity prevents the binding and sticking of pipes.
• Its retention of these properties over a very wide temperature range, from about -65C to + 260C

• RF Cable Assemblies
• Wiring Harness and Assemblies
• Electrical Equipment Wiring Harness
• Electronics Wire Harness
• Automotive Wire Harness
• Genset Wire harness
• Battery Cable Assemblies

Our wiring harness and RF Cable assemblies are used in automobiles, electrical and electronics. Made of PTFE, they are also used as connectors in various terminals. Its basically uses as an assembly.

• Used for Automotive Electrical and Electronics Equipment.
• Assembled according to customer's specifications.
• The component can be JST, AMP and MOLEX according to customer's request.
• Materials of wire and cable are comply with MIL and JSS standards.
• All kinds of our products are ROHS compliant.