Arihant International

New Rishi Nagar, Ludhiana, Punjab

Key Features

• Max. load capacity is 7.5kg(L330) and 2.5kg(L180)  with platform.
• Double LCDs for independent display of time and speed.
• Wide range of platforms for use with a variety of vessels.
• Maintenance- free brushless DC motor.
• Over speed detection and protection.

Hot Air OvenForced convection ovens with controlled temperature upto 250°C through Microprocessor LED Digital Temperature Controller with Auto Timer & Alarms.

Features

• Designed for critical laboratory applications for controlled temperature range up to 250°C with an accuracy of ± 0.5°C.
• Integrated built-in see-thru toughened glass window in the double-walled door.
• Forced convection model accounts for temperature uniformity and higher control accuracy.
• Auto cut-off of blower and heaters on door open position.
• Seamless rounded back edges of internal work chamber and semicircular arcs at corners ensures easy clean-up and uniformities.

Forced convection ovens with controlled temperature upto 250°C through Microprocessor LED Digital.

Tissue Floatation Baths is a modern day tool for separation, flattening out and drying of cut tissues section in histology, pathology, clinical and bacteriological laboratory.

Features

• Specially designed shallow low profile design.
• Die pressed seamless leak-proof inner chamber of Stainless Steel (SS-304).
• Contoured corners account for easy cleaning of the chamber.
• Seamless inner chambers counter microbes and bacteria formation possibilities if any.
• Conventional drying slabs for pre-drying of slides.
• Resin bonded glass wood insulation accounts for minimal thermal losses
• Automatic microprocessor chip based PID Digital Temperature controller with AUTO TIME CONTROLLED feature for cut-off once the set count downtime is over.
• Temperature range from ambient +5° C to 70° C.
• Temperature control accuracy ±1° C (at 60° C)
• Glass basin for tissue separation (1 No.)
• Dry run safety alarm.
• Inner bath chamber and lid made of Stainless Steel (SS-304 grade).
• Outer chamber made of CRC Sheet duly powder coated Or Stainless Steel (as ordered).

Key Features

Powerful and Versatile Universal Centrifuges for Virtually Every Lab Application

• Our multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories.
• The intuitive design of the centrifuges and accessories enables easy access to parameter settings and quick rotation between applications. Features include automatic rotor recognition and backlit LCD.
• The performance of these centrifuges is propelled by German engineering and high quality components for reliable use. Constructed from chemical-resistant stainless steel to ensure durability in lab use.

Reliable and Compact Multi-Function Centrifuges Ideal for General Lab Applications

• Designed for ease of operation, Frontier™ Multi Centrifuges feature convenient control on an intuitive interface, which allows for responsive operation – even when wearing gloves.
• Frontier™ Multi Centrifuges can accommodate standard 50ml and 15ml tubes, including common blood tubes. When used with accessories, rotors can be adapted for sizes as small as 1.5ml.
• Enclosing all its functionalities within a small footprint, Frontier™ Multi Centrifuges save valuable space on the lab bench.

Powerful and Convenient Mini Centrifuge for Simple and Quick Life Science Separation Applications!

• With a low voltage power input, quiet brushless motor and a rubber base that absorbs vibrations, Frontier 5306 minimizes operational noise and reduces disruptions in the laboratory.
• Frontier 5306 is designed with operator safety in mind, and includes a rotor imbalance sensor and two safety switches which immediately stop the rotors should the lid open during use.
• Frontier 5306 takes simple one-step operation to a new level. Simply place your sample in the centrifuge, close the lid, and it will begin to rotate without the press of a button.

Economical, safe and reliable low-speed multifunction benchtop centrifuge.

• Designed for safety - the imbalance sensor identifies a rotor imbalance and stops operation to protect the user. The lid’s unique design allows it to remain open at all angles, thus preventing accidental closure.
• View or adjust speed/time during operation easily with the backlit LCD display. Lid automatically opens after the run is complete and the single-turn rotor lid allows users to access the samples fast.
• FC2706 uses a quiet, maintenance-free brushless DC motor. The centrifuge housing, chamber, and rotor buckets are constructed of corrosion-resistant stainless steel that holds up well to organic solvents.

Economical, safe, and reliable high-speed micro centrifuge.

• Imbalance sensor identifies a rotor imbalance and stops the operation to protect the user. Centrifuge lid allows the lid to remain open at all angles and prevents accidental closure of the lid.
• A backlit LCD display lets you view or adjust speed and time during operation easily. Lid automatically opens after the run is complete, single-turn rotor lid allows users to quickly access their samples.
• Uses a quiet and maintenance-free brushless DC motor. The centrifuge housing, chamber, and rotor are made of corrosion resistant stainless steel that holds up well to organic solvents.

Laminar Air Flow (Horizontal) Complete SS with Microprocessor Control & Alarm

• Switches: Microprocessor based switches for Blower, LED light & UV light with (UV light with Timer).
• Pre filter: 90.00% down to 5 micron
• HEPA Filter: ISO 14644 class 5 (class 100) 99.97% -99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow: Frontward Horizontally.
• Noise Level: 60 decibel -+5%
• Velocity: - 0.35-050m/sec.
• Work Table: Made up of stainless steel 304gr. Cock for gas on work table.
• Front Door: made of Acrylic (Foldable)
• UV Lamp: 15/30w, make Philips Holland.
• Illumination: LED lights for easy operation.
• Pressure:  Manometer 0-50mm range with filter failure alarm.
• Power supply: 230v -+10v/50 Hz single phase AC.
• Cabinet: Cabinet made of 304 gr. Stainless steel. 
• Heavy Duty Blower: Dynamically balanced with 0.25HP Electric Motor Mounted on anti-vibration pad 1440rpm motor.

Working Size

• Working Size:- 60x60x60cm
• Working Size:- 90x60x60cm
• Working Size:- 120x60x60cm
• Working Size:- 180x60x60cm

Laminar Air Flow workstation (Vertical) Mild Steel

• Switches: Microprocessor based Touch panel for Blower, LED light & UV light. (UV light with Timer). Motorized front door of toughen glass.
• Pre filter: 90.00% down to 5 micron
• HEPA Filter: ISO 14644 class 5 (class 100) 99.97% -99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow: Top to downward
• Noise Level: 60 decibel -+5%
• Velocity: - 0.35-050m/sec.
• Work Table: perforated Made up of stainless steel 304gr. Cock for gas on work table.
• Front door: Made of Toughen Glass. (Motorized).
• UV Lamp: 15/30w, make Philips Holland.
• Illumination: LED Lights for easy operation.
• Pressure: Digital Manometer 0-50mm range with filter failure alarm.
• Power supply: 230v -+10v/50 Hz single phase AC.
• Cabinet: Made of Mild Steel duly powder coated.
• Electricals: 15/5 AMP Sockets with switch.
• Heavy Duty Blower: Dynamically balanced with 0.25HP Electric Motor Mounted on anti-vibration pad 1440rpm motor.
• Safety Features: - Voltage fluctuations protection. Micro switches for UV & LED lights.
• Stand: castor wheels for easy movability. Front wheels lockable with brakes.

Working Size

• Working Size:- 60x60x60cm
• Working Size:- 90x60x60cm
• Working Size:- 120x60x60cm
• Working Size:- 150x60x60cm

Flask Volumetric (Measuring) with inter changeable stopper, Accuracy as per class 'B' of I.S. 915 : 2006.

Motor Controlled piston movement.
Re-circulation system allows quick purging without loss of reagent.
Easy, user-friendly, TFT touchscreen guides you to perform quick and accurate titration.
Three dispensing speeds including drop-wise dispensing allows you to achieve the end point very accurately.
Dispensing can be performed by a touch of the screen and stops immediately when the touch is removed.
20 results can be saved in memory.
Computer connectivity.
Conforms to ISO 8655 standards

Laminar Air Flow (Horizontal) Mild Steel with Microprocessor Control & Alarm

• Switches: Microprocessor based switches for Blower, LED light & UV light with LED back light display (UV light with Timer).
• Pre filter: 90.00% down to 5 micron
• HEPA Filter: ISO 14644 class 5 (class 100) 99.97% -99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow: Frontward Horizontally.
• Noise Level: 60 decibel -+5%
• Velocity: - 0.35-050m/sec.
• Work Table: Made up of stainless steel 304gr. Cock for gas on work table.
• Slide Panels: 6mm -+.5mm thick Acrylic sheet. 
• Front Door: made of Acrylic (Foldable)
• UV Lamp: 15/30w, make Philips Holland.
• Illumination: LED white light.
• Pressure:  Digital Manometer 0-50mm range with filter failure alarm.
• Power supply: 230v -+10v/50 Hz single phase AC.
• Cabinet: Made of Mild Steel duly powder coated.
• Heavy Duty Blower: Dynamically balanced with 0.25HP Electric Motor Mounted on anti-vibration pad 1440rpm motor.

Laminar Air Flow Workstation (Vertical) Complete SS

• Switches: Microprocessor based Touch panel for Blower, LED light & UV light. (UV light with Timer). Motorized front door of toughen glass.
• Pre filter: 90.00% down to 5 micron
• HEPA Filter: ISO 14644 class 5 (class 100) 99.97% -99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow: Top to downward
• Noise Level: 60 decibel -+5%
• Velocity:- 0.35-050m/sec.
• Work Table:  Made up of stainless steel 304gr. Cock for gas on work table.
• Front door: Made of Toughen Glass. (Motorized).
• UV Lamp: 15/30w, make Philips Holland.
• Illumination: LED Lights for easy operation.
• Pressure: Digital Manometer 0-50mm range with filter failure alarm.
• Power supply: 230v -+10v/50 Hz single phase AC.
• Cabinet: Cabinet made of 304gr. Stainless steel.
• Electricals: 15/5 AMP Sockets with switch.
• Heavy Duty Blower: Dynamically balanced with 0.25HP Electric Motor Mounted on anti-vibration pad 1440rpm motor.
• Safety Features: - Voltage fluctuations protection. Micro switches for UV & LED lights.
• Stand: castor wheels for easy movability. Front wheels lockable with brakes.

MDF Planks. Nicely painted. Provided with tilting type bolts &   fly-nuts for putting sufficient pressure. Size: 45x30cm

Capacity 500 specimen tube of 75mm x 25mm size. Cabinet frame of plyboard with melamine lamination. Hinged door is provided with lock and handle and is lined with velvet. Provided with 5 drawers each for 100 specimen tubes.

Insect breeding cage consisting of a base and lid of high impact polystyrene and a heat resisting cylinder which allow the cage to be sterilized. Size 45x15cm.

Framework of seasoned teakwood, nicely polished. All three sides and top Providedwith nylon wire screen supported by fine wire mesh mosquito proof. Front side divided into two doors, lower door solid wooden and upper door with nylon screen supported by wire mesh. Wooden base covered with laminated sheet form inside. Size 45x45x65cm.

Rescholar insect chambers provided the ideal environment to stimulate a variety of entomological studies in medium and high volumes. With its wide temperature range of 5°C to 70°C and humidity range from 20% to 98% RH the Insect growth Chambers offer reliable results for insect rearing experts in numerous fields and disciplines. Standard features are incorporated in the design to support insect rearing such as an interior comprised of corrosion-resistant stainless steel that is easily removed without tools for routine cleaning or re-configuration. Insect Growth chambers come standard with phenolic coated coils, protecting interior components and contributing to a long operating life because most insect growth studies, such as the rearing of the fruit fly, create acidic secretions

Description

• Most suitable for experiments requiring low-temperature conditions like microorganism or activation, cell culture process of animals and plants, good storage and desalting process of enzyme extracts, etc.

• With a solid double-walled door and a full view inner plexiglass door enables inspection and monitoring of inner chamber specimens without distributing the process temperature.

• Excellent quality magnetic gum packing door gasket for an external door.

• User-oriented design of shelves makes you adjust each space of shelves without difficulty.

• Forced air circulation at the triple-walled back by the durable coaxial blower, maintains optimum temperature uniformity and homogeneity.

• High-grade HIGH PRESSURE FOAMED IN-PLACE PUF INSULATION between outer and inner chamber for minimal thermal losses.

• Caster wheel mounted for easy portability.

• Front double walled door is provided with lock and key arrangement.

• Door operated illumination lamp is fitted inside the chamber for easy visibility.

• Finned tube evaporator facilitates uniform and faster cooling effects.

• Temperature Controller: Microprocessor Based Digital Temperature Indicator-Cum-Controller with LED OR LCD Display OR HMI - PLC Based TFT Touch Screen Display Controller (Option)