The Hydraulic Press Brake, offered by us, is designed and developed through years of experience in sheet metal working. Both cylinders of Hydraulic Press Brake are mounted at backside of press brake and are synchronized for parallelism between ram and table, by providing mechanical links connected with cylinder. The heavy-duty steel construction frame is so designed to absorb heavy shocks of overload. All Welding edges are properly machined for weld joints. The electrical control panel is fixed on sidewall of convenient place for easy reach of operator. It includes push button pendant and foot switch. Standard ' V ' Block & ' V ' Punch and Manually Operated back gauge system, which is front operated are supplied as standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Yuken etc.

Standard Features - Accessories for basic model

• Rugged structure from ultra tested IS 2062 grade B plates rigidity conforming to international standards
• Hydraulics, electrics of internationally reputed brands for consistent performance and reliable operation
• Pivots with permanently lubricated bearings or hardened part lubricated by central hand pump
• Cylinders of ultra-tested seamless honed tubes, hard chrome-plated; dual seals
• 3 Speed bending cycles for faster output yet slow smooth bending with minimal shock loads
• Movable control station with majority controls, emergency stop, up-down foot -switch controls
• Inch cycle mode for start-up & one-off jobs; Single cycle modes for repeat cycles, production runs
• Hydraulic power gives silent working, better safety against overload, instant stoppage-reversal ram
• One set of unhardened standard punch, multi-vee die block
• Lifting hooks for lifting and rotation of die block when using multi-vee die block

We offer Hydraulic Shearing Machine, TSV series to our customers. Our Hydraulic Shearing Machine is a heavy-duty machine with fixed rake angle and variable rake angle (as per customers need and preference). Models are available in a range of sizes from 4 mm to 25 mm sheet thickness. Our Hydraulic Shearing Machine is acclaimed for features like welded steel frame providing maximum rigidity and cutting accuracy; rapid blade gap adjustment mechanism; compact, low maintenance and reliable hydraulic unit; and hydraulic hold-downs are automatically adjustable for pressure according to sheet thickness.

Hydraulic Power Pack - Hydraulic system is mounted at top at rear side of machine. Valves are mounted on a compact manifold block minimizing piping and chances of leakages. Cylinders: Cylinders are precisely honed and are fitted with hard-chromed piston rod with best quality sealing elements. Cylinders are connected with upper beam (cutting beam). Hydraulic Hold Down: Hydraulic hold down pads holds the sheet securely to avoid slipping & bowing resulting in clean square cut. Hold down units is provided for better clamping while cutting narrow strips. Stroke: The same is adjusted with help of stroke setting rod & limit switches. Blade Clearance: blade clearance can be adjusted manually by lever on each side of machine with calibration of clearance suitable for thickness. Back gauge: Hand operated back gauges are provided.

Standard Features & Accessories

• Welded Steel frame providing maximum rigidity, cutting accuracy and minimum deflection
• Moving beam synchronized by differential cylinders
• Rake angle adjustable to suit thickness & material
• Rapid blade gap adjustment mechanism
• Sheets clamped hydraulically before cut starts
• High quality HCHCr top and bottom blades, four usable edges
• Cutting length & position adjustable for shorter jobs
• Squaring arm 600mm at right helps distribute wear
• Front Gauging with stoppers
• Foot switch movable for operation from safe position
• Finger safely guard with clear view of lighted cutting area
• Dependable global brands of hydraulics & electrical
• Efficient compact power pack with minimal piping

Optional Accessories

• CNC Controller
• Motorized back gauge with DRO
• Table with ball supports
• Angle Indicator
• Stroke Counter

Leveraging on our vast industry experience, we are providing Heavy Duty Hydraulic Shearing Machine that is widely used for cutting metal & non metal sheets, bars, plates, etc. This Heavy Duty Hydraulic Shearing Machine is widely appreciated for blade adjustment feature, which helps in reducing shearing deformation. Because of which, this shearing machine can also be used to shear metals of different thicknesses.

The Hydraulic Press Brake, offered by us, is designed and developed through years of experience in sheet metal working. Both cylinders of Hydraulic Press Brake are mounted at backside of press brake and are synchronized for parallelism between ram and table, by providing mechanical links connected with cylinder. The heavy-duty steel construction frame is so designed to absorb heavy shocks of overload. All Welding edges are properly machined for weld joints. The electrical control panel is fixed on sidewall of convenient place for easy reach of operator. It includes push button pendant and foot switch. Standard ' V ' Block & ' V ' Punch and Manually Operated back gauge system, which is front operated are supplied as standard accessories. Hydraulic components are of reputed make like Vickers, Rexroth, Yuken etc.

Standard Features - Accessories for basic model

• Rugged structure from ultra tested IS 2062 grade B plates rigidity conforming to international standards
• Hydraulics, electrics of internationally reputed brands for consistent performance and reliable operation
• Pivots with permanently lubricated bearings or hardened part lubricated by central hand pump
• Cylinders of ultra-tested seamless honed tubes, hard chrome-plated; dual seals
• 3 Speed bending cycles for faster output yet slow smooth bending with minimal shock loads
• Movable control station with majority controls, emergency stop, up-down foot -switch controls
• Inch cycle mode for start-up & one-off jobs; Single cycle modes for repeat cycles, production runs
• Hydraulic power gives silent working, better safety against overload, instant stoppage-reversal ram
• One set of unhardened standard punch, multi-vee die block
• Lifting hooks for lifting and rotation of die block when using multi-vee die block

We offer Hydraulic Shearing Machine, TSV series to our customers. Our Hydraulic Shearing Machine is a heavy-duty machine with fixed rake angle and variable rake angle (as per customers need and preference). Models are available in a range of sizes from 4 mm to 25 mm sheet thickness. Our Hydraulic Shearing Machine is acclaimed for features like welded steel frame providing maximum rigidity and cutting accuracy; rapid blade gap adjustment mechanism; compact, low maintenance and reliable hydraulic unit; and hydraulic hold-downs are automatically adjustable for pressure according to sheet thickness.

Hydraulic Power Pack - Hydraulic system is mounted at top at rear side of machine. Valves are mounted on a compact manifold block minimizing piping and chances of leakages. Cylinders: Cylinders are precisely honed and are fitted with hard-chromed piston rod with best quality sealing elements. Cylinders are connected with upper beam (cutting beam). Hydraulic Hold Down: Hydraulic hold down pads holds the sheet securely to avoid slipping & bowing resulting in clean square cut. Hold down units is provided for better clamping while cutting narrow strips. Stroke: The same is adjusted with help of stroke setting rod & limit switches. Blade Clearance: blade clearance can be adjusted manually by lever on each side of machine with calibration of clearance suitable for thickness. Back gauge: Hand operated back gauges are provided.

Standard Features & Accessories

• Welded Steel frame providing maximum rigidity, cutting accuracy and minimum deflection
• Moving beam synchronized by differential cylinders
• Rake angle adjustable to suit thickness & material
• Rapid blade gap adjustment mechanism
• Sheets clamped hydraulically before cut starts
• High quality HCHCr top and bottom blades, four usable edges
• Cutting length & position adjustable for shorter jobs
• Squaring arm 600mm at right helps distribute wear
• Front Gauging with stoppers
• Foot switch movable for operation from safe position
• Finger safely guard with clear view of lighted cutting area
• Dependable global brands of hydraulics & electrical
• Efficient compact power pack with minimal piping

Optional Accessories

• CNC Controller
• Motorized back gauge with DRO
• Table with ball supports
• Angle Indicator
• Stroke Counter

Leveraging on our vast industry experience, we are providing Heavy Duty Hydraulic Shearing Machine that is widely used for cutting metal & non metal sheets, bars, plates, etc. This Heavy Duty Hydraulic Shearing Machine is widely appreciated for blade adjustment feature, which helps in reducing shearing deformation. Because of which, this shearing machine can also be used to shear metals of different thicknesses.