Write a Review
Our Products
Our Complete range of products are Miniature High Pressure Permeameter, Triaxial Test Outfits, Shrinkage Limit Set, Hand Operated Extractor and Flash Point.
Incorporates a sliding carriage which is operated without transmitting vibrations to pipette or to sedimentation tube when the pipette is inserted and withdrawn from the liquid.
ApplicationSedimentation Analysis.
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
It is designed to deliver equal impact energy in each blow while performing Standard Penetration Test.
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
The load is indicated on 20cm dial Load gauge 1000kN capacity. The Load gauge can be fixed to the Load gauge adaptor. A red maximum pointer is fitted to the Load gauge to indicate the maximum load applied on the specimen. A drag knob is provided to operate the maximum pointer.
IndustryCement/RMC, Construction Chemicals, Dams & Tunnels, Fly Ash, Irrigation, Railways Sleepers, Real Estate, Refractories, Roads, Highways & Bridges
Miniature High Pressure Permeameter determins the permeability characteristics of solidified soils and rock cores.
ApplicationPermeability Test
Industry| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Railways | Roads, Highways & Bridges |
Automatic/Manual Mortar Mixer, 5 litre nominal capacity Application: Preparation of standard prisms with Automatic/Manual mixing procedure in accordance with IS:10890, EN 196-1 & EN 196-3.This apparatus has specially been designed to prepare cement mortar for strength determination as specified in IS:4031. It can also be used in mixing lime with pozzolonic materials for determination of lime reactivity (as per IS: 1727) and for uniform mixing of soils with additives such as lime, cement, etc.
| Special Features :Microprocessor controlChoice of automatic mixing cyclesSand DispenserWater burette The mixer is designed to mix mortars and cement pastes primarily to the requirements of EN 196. The mixing paddle has a planetary motion and is driven by a motor with a microprocessor based speed and program controller. The mixer can be operated either in an automatic or manual mode. When the mixer is used in the manual mode, the two mixing speeds can be changed by means of a soft touch button, without switching off the motor. In the automatic mode any one of the pre-set mixing programmes may be selected. Also, AIM-412-4 has been designed to prepare cement mortar for strength determination as specified in IS:4031. It can also be used in mixing lime with pozzolonic materials for determination of lime reactivity (as per IS:1727) and for uniform mixing of soils with additives such as lime, cement. | |||||||||||||||||||
| ApplicationSample preparation .Industry Civil Infrastructure
Education
Metal & Material
Special Applications
Traffic & Transportation
|
Flow cup of the efflux type is used for approximate measurements of apparent viscosity for control of consistency during manufacture and use of paints, lacquers and viscous products. Flow cups with protective skirt are made from gun metal with stainless steel orifice and are equivalent to Type B cups. Each cup is supplied complete with a stand having levelling screws.
Industry| Asphalt / Petroleum/ Bitumen Testing | Dams & Tunnels |
| Real Estate | Roads, Highways & Bridges |
| Traffic Monitoring |
| Building Technology | Civil Department |
| Geotechnical | Science Colleges |
Invariably in every soil laboratory, compaction and penetration tests on soils are carried out regularly. The electrically operated mechanical compaction process eliminates the tedious hand compaction process and results in a considerable saving of time. Two rammers with two different stroke lengths are provided. This makes the apparatus suitable to carry out all the normal compaction operations required in soil testing laboratories including the CBR tests.This is a new design motor driven mechanical compactor, useful for soil compaction in 100 mm or 150 mm dia moulds. The rammer travels across the mould and the table rotates the mould in equal steps on a stable base. The number of blows per layer can be set at the beginning of the test.Rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight.Drop - Adjustable to 310mm or 450mm.Supplied with AIM 11001-MS and AIM 11101-MSThe equipment is suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
ApplicationCompaction of Soil
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
In-Situ Density
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
Capping set vertical for capping 150mm/150 dia Cylinders and Cores to ensure that the ends of the specimens are flat and parallel while conducting compressive strength tests.The vertical capping set comprises of a base with an upright, which serves as a guide for positioning the capping plate and a cylinder. Precisely machined capping plate is for keeping molten compound and to position the cylinder. Supplied complete with a cylinder carrier and a laddle.
ApplicationCapping Equipment
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
This unit is designed for cutting and grinding cylindrical rock specimens upto NX size. The outfit includes 200 mm dia diamond impregnated cutter, a fine diamond impregnated grinding wheel, a water supply system and sample holder.A V-Vice, to hold the sample upto 55 mm dia x 140 mm long to be cut parallel and square to the longitudinal axis is provided. Cores longer than 140 mm can be prepared by reversing the specimen and holding the same vice. A hand feed arrangement is provided to facilitate the specimen with a uniform and smooth feeding motion.Suitable for operation on 415 V, three phase, AC supply
ApplicationSample preparation .
Industry| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Railways | Roads, Highways & Bridges |
| Triaxial Cells, Triaxial Test Outfits & Triaxial Electronic Conversion Kit (AIM 075, AIM 075-38, AIM 076, AIM 085, AIM 095, AIM 096, AIM 096-1/2/3) Ref Std : IS 2720 (Part 12) |
AIMIL supplis complete range of Triaxial Cells for testing specimens of 38, 50, 75 & 100 mm sized specimens, Traixial Electronic kit and Triaxial Outfits for 38 & 50 mm.
ApplicationSoil Strength (Triaxial)
IndustryChemical/Process Agricultural
The Shrinkage Limit of a soil is defined as the moisture content after which any further reduction of moisture does not cause volume reduction. The shrinkage of clayey soil can be very significant. A fully saturated soil specimen is allowed to dry in free air and its volume is measured repeatedly by immersing in a mercury bath. From the data obtained from this test, Shrinkage Limit, Shrinkage Ratio, Shrinkage Index and Volumetric Shrinkage can be calculated.The choice of puddle-clay material is often governed bythe results obtained from this test.
ApplicationShrinkage Limit Test
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
Particle size analysis
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
The Flow Table top is 76.2 cm dia, finely machined from a solid brass casting. The integrally cast ribs are designed for support and strength. The stand is fabricated of cast iron and is of sturdy construction. Holes for mounting on foundations are drilled in the base plate. The ground and hardened steel cam is designed to drop the table by 12.5 mm with an electric geared motor.The equipment is supplied along with flow mould.suitable for operation with 220 volts, 50 Hz, single phase, AC Supply.
ApplicationFlow Test Measurement
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Pulveriser is designed for grinding materials to produce the fine mesh samples.
ApplicationDesigned for grinding materials to produce fine mesh samples.
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Hand operated Extractor, for 38 mm dia specimens for extracting soil core specimens of 38 mm dia from sampling tube or from larger size samplers. It can be used in the field also, for taking out samples.Ordering Information :AIM 031 Hand Operated Extractor for 38mm dia specimenAIM 031-S1 Hand Operated Extractor for 38mm dia & 50mm dia specimen
ApplicationSample preparation .
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
We offer a range of cube moulds both in steel and cast iron for 70.6 mm and 50 mm cubes with ISI certification mark as per IS : 10080/10086. Three gang mould for 50 mm cube is also available.
ApplicationMoulding
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Aggregates which are flaky and/or elongated will often lower the workability of a concrete mix and may also affect long term durability. In bituminious mixtures, flaky aggregates make for a harsh mix and may also crack and break up during compacting by rolling. The flakiness of aggregates is determined by measuring the thickness of individual particles. Aimil offers thickness gauge and length guage with ISI certification mark as per IS: 2386 (Part 1) to check flakiness index and elongation index of the aggregate respectively.Thickness Gauge with ISI Certification Mark, IS:2386 (Part-1) Constructed from heavy gauge sheet steel with ISI Certification Mark, IS:2386 (Part 1)Length Gauge with ISI Certification Mark, IS:2386 (Part-1) Constructed from steel, mounted on a hardwood base, with ISI Certification Mark, IS:2386 (Part 1)
ApplicationDetermination of flakiness and Elonagation
Industry| Construction Chemicals | Dams & Tunnels |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Railways | Roads, Highways & Bridges |
For determining the viscosity of cut back bitumen and road oil. The viscometer consists of a chrome plated copper bath, with a drain valve and a central tube to receive the test cup and to position the stirrer, and is mounted on a stand with levelling feet. Stirrer has a curved shield and is provided with an insulated handle, thermometer socket and swivel support for the valve. Supplied complete with 10 mm cup and ball valve as per the model required.
AIM 531 Standard Tar Viscometer, Electrical Heating with Immersion Heating Elements and Dimmerstat for controlling the temperature. Complete with 10 mm Cup and Valve.Suitable for operation on 220V, 50 Hz, single phase, AC supply.
AIM 533 Standard Tar Viscometer, 10 mm cup and ball valve Electrical Heating similar to AIM 531, but with 4 mm Cup and Valve.
ApplicationFor determining the viscosity of cut back bitumen and road oil
Industry| Asphalt / Petroleum/ Bitumen Testing | Dams & Tunnels |
| Real Estate | Roads, Highways & Bridges |
| Traffic Monitoring |
| Building Technology | Civil Department |
| Geotechnical | Science Colleges |
Laboratory Ball Mills supplied are primary designed for grinding pigments. The material is ground at a specific speed by using a specific quantity of grinding media (Steel Balls ) for a specific period.The equipment is used for making the ground cement samples in the laboratory. Apart from the cement industry, it is also used in the paint, plastic, granite and tile industries.The equipment is provided with a revolution counter for recording the revolutions.Recommended balls for Ball Mill for 5kg capacity40 mm dia : 43 Nos.30 mm dia : 67 Nos.25 mm dia : 10 Nos.19 mm dia : 71 Nos.12.5 mm dia : 94 Nos.Suitable for operation on 415V, 50Hz, 3 Phase, AC supply.
ApplicationCrushing and Grinding
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Jaw Crusher is designed to speed up crushing of aggregates, Ores, Minerals, Coal and similar products.
ApplicationCrushing of cement sample.
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Proper compaction of cement concrete while casting specimens for compression testing is essential to achieve higher compressive strength.AIMIL Vibrating Table is ideally suited for this purpose. The table top is suitable to hold cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation.The specially designed vibro motor for operating the vibretor.Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
ApplicationVibratory Compaction
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
This bench mounted, single spindle lapping machine is ideally suited for the final polishing of mounted rock or concrete specimens. This is a motor driven unit with 450/500 rpm. A swing-in tap, for continuous water supply during operation, is also provided.Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
Salient Features :
Sample Preparation.
Industry| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Railways | Roads, Highways & Bridges |
For determining the flash and fire points of petroleum products, except for fuel oil and those products which have open cup flash point below 79 C (175 F).
ApplicationFor determining the flash and fire points of petroleum product
Industry| Asphalt / Petroleum/ Bitumen Testing | Dams & Tunnels |
| Real Estate | Roads, Highways & Bridges |
| Traffic Monitoring |
| Building Technology | Civil Department |
| Geotechnical | Science Colleges |
Aimil Hydro Frac System has been developed for application of In-situ stress measurement by Hydro Fracture Test at near surface and underground situations. The compact nature of Hydro Frac tool enables location of the tool in a section of test hole free of incipient weakness in the rock mass and as uniform as possible. This also means that the stress measurements can be made within a volume of rock small enough that stress gradient will not have a significant inpact on the measurement.The equipment is designed for operating upto a depth of 30m approximately consistent with a typical application envisaged and avoiding the need for any sophisticated down hole Instrumentation.The Hydro Frac System consists of two manually operated Hydraulic Pumps, a USB Data Acquisition System, two pressure transducers, two pressure gauges, all of which are enclosed in a dust proof metal enclosure and is called the main unit. The controls of the equipment are located on the main unit in such a way that they are easily accessible to the operator. The main unit is mounted on a metal frame to make it convenient for carrying to the test site manually. The Installation rods are manufactured from stainless steel. The system can deliver dual hydraulic pressure upto 400 kgf/cm2. An Impression packer which is a very important part of the system is manufactured for use in diamond drilled Ex size bonebase holes.
ApplicationHydro Fracture
Industry| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Railways | Roads, Highways & Bridges |
These instruments are for determining the viscosity of all oils, expressed in Redwood seconds at the temperatures of test as called for by IP 70. Both types of viscometers, Redwood No.1 and Redwood No. 2 electrical heating models are available. The viscometer consists of a heavily silver plated brass oil cup with a precision stainless steel jet assembled in a chromium plated bath fitted with a heating tube or heating element and drain cock. The bath and cup assembly is mounted on a stand with levelling feet. Each unit is supplied complete with silver plated ball valve, spirit level with cover, thermometer clip and receiver of capacity 50ml.
ApplicationFor determining the viscosity of all oils
Industry| Asphalt / Petroleum/ Bitumen Testing | Dams & Tunnels |
| Real Estate | Roads, Highways & Bridges |
| Traffic Monitoring |
| Building Technology | Civil Department |
| Geotechnical | Science Colleges |
The Flow Table consists of a brass table top 250 2.5 mm dia, mounted on a rigid stand. The table top is reinforced with equally spaced ribs and allowed to drop through 12mm by a ground and hardened cam. The Motor Drive assembly using the geared motor box is designed to rotate the cam through the shaft at 100 rpm.
ApplicationSample preparation
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
| These tests are used to determine the flowability and passing ability of Self-Consolidating Concrete (SCC) as defined in ASTM C1621. Passing ability refers to the ability of SCC, under its own weight (without vibration), to flow into and completely fill the spaces within an intricate framework, containing obstacles such as reinforcement bars. J-Ring This test method provides a procedure to determine the passing ability of self-consolidating concrete mixtures.The difference between the slump flow and J-Ring flow is an indication of the passing ability of the concrete. The test method is applicable for laboratory use in comparing the passing ability of different concrete mixture. It is also applicable in the field as a quality control test. It can also be used to investigate the resistance of SCC to segregation by comparing test results from two different portions of sample. The J-Ring test measures three parameters: flow spread, flow time and blocking step.The J-Ring flow spread indicates the restricted deformability of SCC due to blocking effect of reinforcement bars and the flow time indicates the rate of deformation within a defined flow distance. The blocking step quantifies the effect of blocking. L-Box L Box to investigating the flow rate and passing ability of SCC (self-consolidating concrete) in confined spaces. It measures the reached height of fresh SCC after passing through the specified gaps of steel bars flowing within a defined flow distance. With this reached height, the passing or blocking behavior of SCC can be estimated. U-Box The U Shape Box is used to determine the confined flowablity and the capacity of SCC concrete to flow within confined space. The box is made of steel frame consisting of three bars. In this test the degree of compatibility can be indicated by the height that the concrete reaches after flowing through an obstacle. The quality of the concrete can be judged by the height reached. V-Funnel The V- Funnel flow time is the period a defined volume of SCC (self-consolidating concrete) needs to pass a narrow opening and gives an indication of the filing ability of SCC provided that blocking and or segregation do not take place, the flow time of the V-Funnel test is to some degree related to the plastic viscosity. Flow Table for Self Compacting Concrete Flow table is used to determine the flow of fresh mixed super plasticized concrete to high working. The slump cone is placed centrally on the table of to be held position by standing on the two foot pieces. A wooden tamping bar is provided for lightly tamping for each layer. | |||||||||||||||||||
| Industry Civil Infrastructure
Education
Metal & Material
Special Applications
Traffic & Transportation
|
Constant Pressure Systems are meant for maintaining the pressure in the triaxial cell constant by automatically compensating for the fluctuation of cell pressure taking place as a result of volume change occurring in the cell due to expansion of the specimen under high pressure, entry of the loading plunger into the cell, consolidation of specimen, etc. Constant Pressure Systems are usually employed to ensure accurate performance of such types of Triaxial Shear tests(consolidated undrained test on clayey soils and drained test on most of the soils) where maintenance of the set pressure constant over a long period is essential.We supply a range of Constant Pressure Systems-Mercury water type, Oil water type and Air water type.
ApplicationConstant Pressure
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
the ever-increasing emphasis on safety, environmental pollution and automatic handling of toxic materials has seen a need for the development and use of asphalt extraction systems. Aimil offers instrument for asphalt extraction to recover the trichloroethylene or dichloromethane from the bituminous mixtures.this machine is used for recycling trichloroethylene(c2 hcl3) used in asphalt extraction tests and the recovered solvent can be used 6-7 times and its found very cost effective as the price of trichloroethylene is very high.the instrument comprises of two chambers for solution evaporator and condensation and control cabinet for temperature control & cooling water cycling. The main unit is made of stainless steel for rust free operation for longer time.
applicationfor recycling trichloroethylene (cho3)
industry| asphalt / petroleum/ bitumen testing | dams & tunnels |
| real estate | roads, highways & bridges |
| traffic monitoring |
| building technology | civil department |
| geotechnical | science colleges |
The Proving Rings are made up of special steel, carefully forged to give maximum strength and machined to give high sensitivity commensurate with stability, ensuring long life and accuracy.All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists with bolted abutments. Repeatability in these Proving Rings is as stipulated in IS:4169. The rings are supplied complete with dial gauge and Works Calibration Chart, individually packed in polished wooden boxes. National Physical Laboratory (NPL), (India)/ National Council for Cement & Building Material (NCCBM )Calibration can also be arranged for any proving ring at an additional cost. Proving rings to meet special requirements are also available on request.Separate polished and ground pair of Loading Pads for Compression Proving Rings and pair of Shackles for Tension Proving Rings are provided to suit each proving ring.We supply Compression Proving Rings, Tension Proving Rings & Tension Compression Proving Ring of different capacities.
ApplicationCompression and Tension Measurements
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
The tile sample is pressed under a specified load against a grinding path, strewen evenly with an abrasive powder, revolving at the rate of 30 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear an equal number of revolutions of the disc.The wear of the tile is measured using AIM48101 thickness measuring device (which is supplied at extra cost). The Abrasion Testing Machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counterbalanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder.Supplied complete with automatic pre-set revolution counter and one 7.5 kg weight, but without abrasive powder and thickness measuring device. Suitable for operation on 415 V, 50 Hz, 3 phase, AC Supply.
The concrete test hammer is an instrument used for the non destructive testing of concrete. It allows one to have a quick estimate of the strength of concrete. Since it simply gives an indication based on surface properties.
ApplicationConcrete Test
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Core Case is the first innovation in Concrete core drilling. Connected to the core drill assembly with a flexible rubber coupling, the heavy duty, hand held, rotary drill easily produces cores upto 100 mm
ApplicationSample Collection
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
This apparatus is used for determination of the strain and deformation characteristics of cement concrete cylindrical specimens of 150 mm dia x 300 mm length. The Compressometer consists of two frames for clamping to the specimen by means of five tightening screws with hardened and tapered ends. Two spacers hold the two frames in position. An adjustable pivot rod rests on pivot screws.A spring enables the pivot rod to remain in contact with pivot screws. The ball chain is for adjusting the tension of the spring. A dial gauge, fixed to a bracket, fitted to the top frame, is used for taking deformation measurement.
ApplicationStrain Measurement
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
A specially designed Vibration Machine is used for vibrating the mix in moulds at a frequency of 12, 000 400 cycles per minute, as per specifications.The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the cube and mould, is either at the centre of the eccentric shaft or within 25mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds. Each machine is supplied AIM 414 one cube mould with ISI Certification Mark and poking rod.Suitable for operation on 220V, 50Hz, Single Phase, AC supply.
ApplicationSample preparation
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Film stripping device is used to measure the resistance of bituminous mixtures to stripping of asphalt from aggregate particles. It is generally used to evaluate mineral aggregates & to judge the adhesion of the bituminous materials.The device consists of a disk on which 4 bottles are mounted. The disc rotates at a speed of approx. 100 rpm. The sample, usually the aggregate fraction which passes a 9.525 mm sieve but is retained on a No. 8 sieve, is placed in the bottles & agitated for 15 minutes. The percentage of aggregate stripped can be visually estimated. The device is provided with a pre set counter. Suitable for operation on 220 V, 50Hz, Single Phase, AC supply.
Industry| Asphalt / Petroleum/ Bitumen Testing | Dams & Tunnels |
| Real Estate | Roads, Highways & Bridges |
| Traffic Monitoring |
| Building Technology | Civil Department |
| Geotechnical | Science Colleges |
Hydraulic Jacks have multipurpose utility, i.e. application of loads while engaged in field investigation, determination of load carrying capacity of piles in the field, tensioning of wires in pre-stressed structures, loading of members of any structure for deformation characteristics etc. The jacks are supplied complete with manually operated pumping units fitted with bourdon tube type load gauge and high pressure flexible hose pipe.All the jacks have a piston travel of 50 mm and jacks upto 1000 kN capacity are provided with retraction springs.
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
AIMIL Consistometer is based on consistency test which is a mechanical variation of the simple slump test which includes determination of the workability of concrete.
ApplicationConsistency Test
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Centrifuge Extractors are used for determining the bitumen percentage in Bituminous Paving mixtures.paving mixtures. It has a removeable, precision machined, aluminium rotor bowl, mounted on a vertical shaft. A filter paper disc is pressed in-between the rotor bowl and cover plate by tightening a knurled nut. The bowl assembly is enclosed in a housing mounted on a cast body. In the electrical operating model, the rotor bowl is coupled to a motor. The solvent may be introduced during test through a cup on the housing cover.
ApplicationBinder Extraction
Industry| Asphalt / Petroleum/ Bitumen Testing | Dams & Tunnels |
| Real Estate | Roads, Highways & Bridges |
| Traffic Monitoring |
| Building Technology | Civil Department |
| Geotechnical | Science Colleges |
The Hydraulic Press is a portable bench model and can be used on a sturdy table top. It is fitted with a load measuring gauge calibrated for 0 - 250 kN and also fitted with a pressure release valve for removing pallets.
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
These are suitable for the use on a loading membrane under adverse conditions. These are portable with high accuracy and are avilable in sizes of 100mm, 150mm and 200 mm.
ApplicationStrain Measurement
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
Compression Frame Jig Assembly. This jig assembly is designed for the compression testing of 40 x 40 x 160 mm mortar prisms after breaking in flexure, also for the testing of 50 mm and 2 in square mortar cubes using the appropriate platens.The frame is fitted with a spherical ball seating assembly to which is attached the upper platen.The jig can be used on the complete range of AIMIL compression testing machines and has an overall height of 223 mm.Flexural Jig AssemblyThis jig is designed for the flexural testing of 40 x 40x 160 mm mortar prisms. The frame is fitted with a ball seating assembly to which is attached the upper roller bearers.
saybolt viscosity of petroleum products at specified temperatures between 70of and 210 f. This is also used for determining the saybolt furol viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450f. It comprises one each of cylindrical oil cup, universal tip, furol tip, bath fitted with immersion heater mounted on a stand, dimmerstat for temperature control, stirrer with shield. Apparatus is supplied complete with insulated handle and thermometer support, receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level.
applicationfor the empirical measurement of saybolt viscosity of petroleum products
industry| asphalt / petroleum/ bitumen testing | dams & tunnels |
| real estate | roads, highways & bridges |
| traffic monitoring |
| building technology | civil department |
| geotechnical | science colleges |
Mixing Equipment
For quality specimens to be manufactured efficient mixing of concrete, prior to moulding is essential. Mixing helps in coating the surface of all aggregate particles with cement paste and bring uniformity in the mixture . We offer both Drum type and Pan type models of concrete mixture. They are suitable for mixing small quantities of concrete, generally used in thelaboratories.
Concrete Mixer, Drum Type, Capacity 30 Litre
The mixer consists of a steel vessel of 30 litres, mounted on a frame. The vessel is rotated at 20-24 RPM with the help of a motor and a pulling. The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly. The large handle strip facilitates manual rotation of the drumduring power failure. The drum, handle and motor etc. are mounted on a steel frame. This model is provided with two large wheels for carting away.
Supplied complete, with motor of 1 HP along with lead wire. Suitable for operation on 220V, 50Hz, Single Phase, AC supply.
Concrete Mixer, Pan Type, Capacity 40 Litre
The Concrete Mixer has been designed for mixing small quantities of concrete used in preparation of concrete cubes, for testing in laboratories. The purpose of the mixer is to smear mechanically the aggregate surface with cement paste uniformly & produce a mix of uniform consistency. This in turn gives consistent quality of cube specimens when casted in the moulds. The Concrete Mixer developed is transportable on wheels. The design of mixing paddles ensure uniform & efficient mixing of cement & aggregate both in dry & wet conditions. This machine is suitable for aggregate size upto 20mm. The equipment can also be put to use for mixing of any other material in dry / wet conditions. The arrangement helps the operators to access the pan contents conveniently & emptying the mixture after completion of the operation. The drum is driven off the ribbed base. The lid with mixing paddles clears off thetop of the drum to provide maximum access to the operator.
Specifications:
Mixing Capacity: 40 ltrs.Overall Dimension: 910mm X 875 mm X 1250mmMotor : 2 HP, 960 RPM
Special Features:
Portable & Compact.Adjustable Blades.Simple to clean & maintain.Easy to operate.
Suitable for operation on 440V, 50Hz, Three Phase, AC supply
Mixing
Industry| Cement/RMC | Construction Chemicals |
| Dams & Tunnels | Fly Ash |
| Irrigation | Railways Sleepers |
| Real Estate | Refractories |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Fly Ash |
| Railways | Roads, Highways & Bridges |
For the rapid collection of true representative samples from aggregates, sand and fillers, sample divider is required. Riffle Sample Divider consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flow of the material.
ApplicationSample Testing
Industry| Construction Chemicals | Dams & Tunnels |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Railways | Roads, Highways & Bridges |
The Aimil-Swak Drill is designed as a compact, moderately priced, fully mechanically hydraulically controlled drill to handle complete drilling requirements in shallow and medium depth ranges. These can be installed on a wide range of medium or heavy duty vehicles and exhibits a remarkably low maintenance cost as compared to mechanically driven rigs.Aimil-Swak Drill can be used for a variety of purposes ingeotechnical engineering including boring (Power Auger Boring, Rotary Drilling, Diamond Core Drilling), Sounding(SPT, DCPT, SCPT) and Sampling.
ApplicationFulfills the need to reach shallow and medium depths up to 700 meters. Provides necessary facilities for conducting Vane Shear test, Pressuremeter test. Increases efficiency of site investigation, soil sampling, SPT, DCPT, auger boring for locating water wells, etc. Makes shallow prospecting for minerals and ores more profitable.
Industry| Agricultural |
| Dams & Tunnels | Geophysical/ Seismology Testing |
| Geotechnical (soil/ rock) Testing | Irrigation |
| Mining | Real Estate |
| Roads, Highways & Bridges |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Mining Engineering | Science Colleges |
| Railways | Roads, Highways & Bridges |
the laboratory cement autoclave is suitable for conducting accelerated soundness tests on cement or the autoclave expansion test. The equipment consists of a stainless steel pressure vessel with insulated outer shell, fabricated out of high quality stainless steel sheet. The pressure inside the vessel is controlled through a micro processor based pid controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, pid controller with rtd for control of heater unit.special features :
applicationfor conducting accelerated soundness test on cement.
industry| cement/rmc | construction chemicals |
| dams & tunnels | fly ash |
| railways sleepers | real estate |
| refractories | roads, highways & bridges |
| tiles |
| architecture | building technology |
| civil department | geotechnical |
| science colleges |
| tiles & ceramics |
| fly ash |
| railways | roads, highways & bridges |
Specific Gravity and Water Absorption. Ruggedly constructed from galvanised wire mesh, 20 cm dia x 20 cm high (approx.).
ApplicationSpecific gravity and water absorption
Industry| Construction Chemicals | Dams & Tunnels |
| Railways Sleepers | Real Estate |
| Refractories | Roads, Highways & Bridges |
| Tiles |
| Architecture | Building Technology |
| Civil Department | Geotechnical |
| Science Colleges |
| Tiles & Ceramics |
| Railways | Roads, Highways & Bridges |
TIRTH ENTERPRISE (TIRTH ENTERPRISE)
A/21, Aarushi Bunglows,
Opp. Sharan Residency,
Nr. Shefali Jain Temple,
Vasna, Ahmedabad - 380007, Gujarat
Share us via
