Thermotech : Thermic Fluid Heaters are available in Horizontal & Vertical Models where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

Thermic Fluid Heater Capacity = 0.1 MKcal/hr to 15 MKcal/hr

Maximum Temperature = 370 Deg. C

Application:

Chemical, Textile, Technical Textile, MDF and Particle Board, Plywood and Laminates, Oil & Gas, Packaging, Rubber, Pharmaceuticals, Food Processing, Metal, etc.

Fuel to Handle : Furnace Oil, LDO, Diesel, N. Gas, LPG, Hydrogen, etc.

Quality Assurance : ISO 9001 : 2008 since more than 7 years.

Thermic Heater - Gas Oil / Fired Burner

THERMOTECH : THERMIC FLUID HEATERS are available in HORIZONTAL & VERTICAL MODELS where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

The Main Heat Exchanger is designed with an integrated combustion chamber made out of High Heat Resistant Steel Tubes : BS 3059 P-1 or Seamless Pipes : SA106 Gr.B S40 of adequate size, explicitly designed with twin concentric multi start helical coil. The Coil is inserted into M.S. Shell with structures supports to place complete assembly leveled.

The system is 3 pass on flue gas side, which ensures optimum heat transfer with counter current flow principle. The combustion chamber is designed to maintain safe distance between coil tube surface and burner flame, which ensures optimum heat transfer, long thermic fluid life due to lesser film temperature & safety of helical coil tube, which ultimately safeguards the complete heat exchanger.

HORIZONTAL UNIT WITH EXTERNAL AIR PRE HEATER

This new HT series of Thermic Fluid Heater Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease.

The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment.

The Combustion Fuels :

THERMOTECH : Thermic Fluid Heaters are designed for all commercial & special fuels available in market for combustion.

Fuels like : Kerosene / Diesel / Light Diesel Oil (LDO-LFO) / Furnace Oil (HFO) / Natural Gas / LPG / Pipeline N. Gas, etc. are combustible with same efficiency, which is thankful to our combustion experts who designs combustion parameters & Air to fuel ratio for best output.

Thermotech : Thermic Fluid Heaters are available in Horizontal & Vertical Models where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

Thermic Fluid Heater Capacity = 0.1 MKcal/hr to 15 MKcal/hr

Maximum Temperature = 370 Deg. C

Application:

Chemical, Textile, Technical Textile, MDF and Particle Board, Plywood and Laminates, Oil & Gas, Packaging, Rubber, Pharmaceuticals, Food Processing, Metal, etc.

Fuel to Handle : Furnace Oil, LDO, Diesel, N. Gas, LPG, Hydrogen, etc.

Quality Assurance : ISO 9001 : 2008 since more than 7 years.

Thermic Heater - Gas Oil / Fired Burner

THERMOTECH : THERMIC FLUID HEATERS are available in HORIZONTAL & VERTICAL MODELS where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

The Main Heat Exchanger is designed with an integrated combustion chamber made out of High Heat Resistant Steel Tubes : BS 3059 P-1 or Seamless Pipes : SA106 Gr.B S40 of adequate size, explicitly designed with twin concentric multi start helical coil. The Coil is inserted into M.S. Shell with structures supports to place complete assembly leveled.

The system is 3 pass on flue gas side, which ensures optimum heat transfer with counter current flow principle. The combustion chamber is designed to maintain safe distance between coil tube surface and burner flame, which ensures optimum heat transfer, long thermic fluid life due to lesser film temperature & safety of helical coil tube, which ultimately safeguards the complete heat exchanger.

HORIZONTAL UNIT WITH EXTERNAL AIR PRE HEATER

This new HT series of Thermic Fluid Heater Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease.

The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment.

The Combustion Fuels :

THERMOTECH : Thermic Fluid Heaters are designed for all commercial & special fuels available in market for combustion.

Fuels like : Kerosene / Diesel / Light Diesel Oil (LDO-LFO) / Furnace Oil (HFO) / Natural Gas / LPG / Pipeline N. Gas, etc. are combustible with same efficiency, which is thankful to our combustion experts who designs combustion parameters & Air to fuel ratio for best output.

We are highly specialized in manufacturing, exporting and supplying a qualitative assortment of thermic fluid heater. It is an operation to transfer heat by the fluids under the well suitable temperature. The provided heater is efficiently manufactured under the stem guidance of our skilled professionals as per the set industry norms for ensuring longer service life as the users end. Moreover, the offered thermic fluid heater is available in numerous specifications as per the application requirements of the clients. Features: easy operation longer functional life rugged design fully automatic

we are offering husk fired thermic fluid heater. fostered with long term of industry experience and understanding, we are actively engaged in manufacturing, exporting and supplying a broad array of husk fired thermic fluid heater. our technical experts manufacture this heater with the help of latest techniques by making use of optimal quality components in line with set international industry standards. the offered heater is widely uses coal and husk as fuel for achieving high heat for heating. further, we provide this husk fired thermic fluid heater in diverse sizes and specifications at reasonable prices. features: light weight compact design robust construction high strength

We are offering coal fired thermal fluid heater. Leveraging on our broad industry experience and in-depth market knowledge, we are offering a broad spectrum of coal fired thermal fluid heater. The offered heater is best suitable at the situation of rapidly changing and undependable energy situations. Under the proper supervision of our adept professionals, the provided heater is manufactured with high precision by making use of quality approved components with the help of pioneering machinery. Available in various specifications, the offered coal fired thermal fluid heater is provided to the clients at affordable prices. Features: optimum functionality heat resistance longer service life low maintenance

We are offering gas fired vertical thermal fluid heater. The "thermotech" liquid phase fully automatic heating systems essentially comprises of a fully automatic packaged oilgas fired heater. As a result thermic fluid can be heated up to 300c at near atmospheric pressure, with efficiency as high as 87% on ncv of oilgas fuel. The capacity ranges from 1 lac kcalhr to 25 lacs kcalhr in oilgas firing.

Thermotech : Thermic Fluid Heaters are available in Horizontal & Vertical Models where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

Thermic Fluid Heater Capacity = 0.1 MKcal/hr to 15 MKcal/hr

Maximum Temperature = 370 Deg. C

Application:

Chemical, Textile, Technical Textile, MDF and Particle Board, Plywood and Laminates, Oil & Gas, Packaging, Rubber, Pharmaceuticals, Food Processing, Metal, etc.

Fuel to Handle : Furnace Oil, LDO, Diesel, N. Gas, LPG, Hydrogen, etc.

Quality Assurance : ISO 9001 : 2008 since more than 7 years.

Thermic Heater - Gas Oil / Fired Burner

THERMOTECH : THERMIC FLUID HEATERS are available in HORIZONTAL & VERTICAL MODELS where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

The Main Heat Exchanger is designed with an integrated combustion chamber made out of High Heat Resistant Steel Tubes : BS 3059 P-1 or Seamless Pipes : SA106 Gr.B S40 of adequate size, explicitly designed with twin concentric multi start helical coil. The Coil is inserted into M.S. Shell with structures supports to place complete assembly leveled.

The system is 3 pass on flue gas side, which ensures optimum heat transfer with counter current flow principle. The combustion chamber is designed to maintain safe distance between coil tube surface and burner flame, which ensures optimum heat transfer, long thermic fluid life due to lesser film temperature & safety of helical coil tube, which ultimately safeguards the complete heat exchanger.

HORIZONTAL UNIT WITH EXTERNAL AIR PRE HEATER

This new HT series of Thermic Fluid Heater Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease.

The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment.

The Combustion Fuels :

THERMOTECH : Thermic Fluid Heaters are designed for all commercial & special fuels available in market for combustion.

Fuels like : Kerosene / Diesel / Light Diesel Oil (LDO-LFO) / Furnace Oil (HFO) / Natural Gas / LPG / Pipeline N. Gas, etc. are combustible with same efficiency, which is thankful to our combustion experts who designs combustion parameters & Air to fuel ratio for best output.

Thermotech : Thermic Fluid Heaters are available in Horizontal & Vertical Models where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

Thermic Fluid Heater Capacity = 0.1 MKcal/hr to 15 MKcal/hr

Maximum Temperature = 370 Deg. C

Application:

Chemical, Textile, Technical Textile, MDF and Particle Board, Plywood and Laminates, Oil & Gas, Packaging, Rubber, Pharmaceuticals, Food Processing, Metal, etc.

Fuel to Handle : Furnace Oil, LDO, Diesel, N. Gas, LPG, Hydrogen, etc.

Quality Assurance : ISO 9001 : 2008 since more than 7 years.

Thermic Heater - Gas Oil / Fired Burner

THERMOTECH : THERMIC FLUID HEATERS are available in HORIZONTAL & VERTICAL MODELS where in thermic fluid can be heated up to normal 340 oC at near atmospheric pressure with efficiency as high as 92% on GCV of Oil and Gas fuel.

The Main Heat Exchanger is designed with an integrated combustion chamber made out of High Heat Resistant Steel Tubes : BS 3059 P-1 or Seamless Pipes : SA106 Gr.B S40 of adequate size, explicitly designed with twin concentric multi start helical coil. The Coil is inserted into M.S. Shell with structures supports to place complete assembly leveled.

The system is 3 pass on flue gas side, which ensures optimum heat transfer with counter current flow principle. The combustion chamber is designed to maintain safe distance between coil tube surface and burner flame, which ensures optimum heat transfer, long thermic fluid life due to lesser film temperature & safety of helical coil tube, which ultimately safeguards the complete heat exchanger.

HORIZONTAL UNIT WITH EXTERNAL AIR PRE HEATER

This new HT series of Thermic Fluid Heater Horizontal model is improved version, which have demonstrated their good design & to which new Technologies & Materials are added to improve efficiency up to 93%, energy saving, simplify the maintenance, low smoke emission & able to integrate with PLC & SCADA system with ease.

The Stack Heat from Exhaust flue gases of Main Heat Exchanger are recovered by means of Combustion Air Pre Heater (CAPH) & fresh combustion air is preheated before going to burner, which improves combustion efficiency, reduces stack temperature, reduce fuel consumption & save environment.

The Combustion Fuels :

THERMOTECH : Thermic Fluid Heaters are designed for all commercial & special fuels available in market for combustion.

Fuels like : Kerosene / Diesel / Light Diesel Oil (LDO-LFO) / Furnace Oil (HFO) / Natural Gas / LPG / Pipeline N. Gas, etc. are combustible with same efficiency, which is thankful to our combustion experts who designs combustion parameters & Air to fuel ratio for best output.

We are highly specialized in manufacturing, exporting and supplying a qualitative assortment of thermic fluid heater. It is an operation to transfer heat by the fluids under the well suitable temperature. The provided heater is efficiently manufactured under the stem guidance of our skilled professionals as per the set industry norms for ensuring longer service life as the users end. Moreover, the offered thermic fluid heater is available in numerous specifications as per the application requirements of the clients. Features: easy operation longer functional life rugged design fully automatic

we are offering husk fired thermic fluid heater. fostered with long term of industry experience and understanding, we are actively engaged in manufacturing, exporting and supplying a broad array of husk fired thermic fluid heater. our technical experts manufacture this heater with the help of latest techniques by making use of optimal quality components in line with set international industry standards. the offered heater is widely uses coal and husk as fuel for achieving high heat for heating. further, we provide this husk fired thermic fluid heater in diverse sizes and specifications at reasonable prices. features: light weight compact design robust construction high strength

We are offering coal fired thermal fluid heater. Leveraging on our broad industry experience and in-depth market knowledge, we are offering a broad spectrum of coal fired thermal fluid heater. The offered heater is best suitable at the situation of rapidly changing and undependable energy situations. Under the proper supervision of our adept professionals, the provided heater is manufactured with high precision by making use of quality approved components with the help of pioneering machinery. Available in various specifications, the offered coal fired thermal fluid heater is provided to the clients at affordable prices. Features: optimum functionality heat resistance longer service life low maintenance

We are offering gas fired vertical thermal fluid heater. The "thermotech" liquid phase fully automatic heating systems essentially comprises of a fully automatic packaged oilgas fired heater. As a result thermic fluid can be heated up to 300c at near atmospheric pressure, with efficiency as high as 87% on ncv of oilgas fuel. The capacity ranges from 1 lac kcalhr to 25 lacs kcalhr in oilgas firing.