Our Products
Hot Water Generator Instatherm, is the efficient and cost-effectiveway to generate hot water instantly.
Itis a packaged type, silent and instanthot water generator. It is designed exclusively catering to the hot water requirements ofHotels, Hospitals, Resorts, swimming pools, Dairies, Laundries and various other process industries.
Hot Water Generatorcan be pressurized or non-pressurized depending on the required temperature of water.
If the required water temperature is below 100C, then theHot Water Generatorneed not be pressurized as the boiling point of water at atmospheric pressure is 100C while If the required water temperature is above 100C, then theHot Water Generatorsmust be pressurized and its pressure depend upon the required outlet temperature along with factor of safety.
Hot Water Generator -Instatherms Construction
OurInstatherms-Hot Water Generatorsare designed with high precautions such assafety valveis provided at the top of a shell so that shell pressure does not exceed its design pressure.
Depending on the Capacity ofHot Water Generator, required outlet temperature of hot water and the type of fuel to be used determine the design ofHot Water Generator. Generally, Instathermis a shell and tube, smoke tube type design but smaller capacities can be made in a coil type, water tube design.
The multiple passes of flue gases ensure maximum efficiency therebyHot Water Generatorsproviding low operational costs.
Heating Options for Hot Water Generators
Advantages of Hot Water Generators:
Capacity ofInstatherm (Hot Water Generators Manufactured by Thermodyne):-
Instatherm (Hot Water Generators) is available in capacitiesfrom 30, 000 Kcal/hr to 10 Lac Kcal/hr.
Hot air generators, Thermair, consists of a shell and tube type heat exchanger which is duly insulated to prevent radiation losses.
Thermodyne Engineering Systems Hot Air Generator-Thermair has 2 different designs depending on the required capacity. Smaller capacity Hot Air Generators-Thermair are a smoke tube type design in which flue gases flow in the tubes while Hot Air flows over the combustion chamber and smoke tubes. Large capacity Hot Air Generator-Thermair is an air tube type design in which air flows in the tubes while flue gases flow over the tubes. The ventilation blower fitted alongside blows fresh air over the combustion chamber and the set of smoke tubes. In oil-fired or gas-fired options, an imported mono-block type fully automatic burner is provided for combustion of fuel.
Hot Air Generator-Thermair can also be offered in solid fuel firing options. A dust-proof, pre-wired control panel is also supplied as a standard supply to control the operation of the unit based on customer requirements.
Heating Options:
Thermodyne Engineering System can provide you various types of fuel options with your hot air generator such as:-
Depending on these fuels, Thermodyne Boilers has different designs of hot air generators.Thermodyne manufacture both Internal Furnace as well as External Furnace Hot Air Generators and also manufacture Hot Water Generators. Internal Furnace is suited for smaller capacities and generally for Liquid or gaseous fuels and wood/Coal/Briquettes, while the External furnace is suited for fuels which are fired automatically such as petcoke or husk. In case of wood /coal/husk fired, hot air temperature as high as 3000C can be achieved while in case of diesel or gas-fired, the temperature of about 3500C can be achieved in our indirect fired Hot Air Generator
Advantages:
Thermodyne Thermair has various applications, it can be used in various process industries such as gypsum board factories for drying gypsum boards, various sugar industries or agro waste industries for drying bagasse and agro waste in order to remove moisture from it. It is also used in dryers in various chemical industries to evaporate the moisture content from chemicals.
Instatherm - Hot Water Generator
INSTATHERM is a packaged, silent and instant hot water generator exclusively catering to needs of hot water in Hotels, Hospitals, Resorts, Swimming Pools, Dairies, Laundries and various other industries. The multi-pass design for the Flue Gases ensures high efficiency and low running cost. The Boiler comes equipped with best quality even more reliable and economic.
Key Features:
The efficient and cost effective way to generate hot water instantly. No more dependence upon the unreliable power supply to heat water.
Application:
Instatherm can also be used for central heating applications in Hotels, Restaurants, Guest Houses, Laundries and other commercial buildings. The hot water supplied by the unit, if passed through a fan coil unit mounted in individual rooms, would heat the rooms to the desired temperature. Thermostatic control provided in each FCU helps in controlling the hot air flow through each room thereby making it fully automatically in operation.