Product / Services
Post Buy Requirement
TS
THERMODYNAMIC SERVICES
Kanpur, Uttar Pradesh, India
Verified Add Review
Call 08068051365 Ext. 692

Our Products

  1. Industrial Chemicals 3 Products available
  2. Others 10 Products available

Other Products / Services #2998379

boiler water chemical

Boiler Water Chemical
A boiler is used for generating steam. It does this by heating water to its boiling point, after which steam will evaporate from it. When you boil a kettle of water, you will shut off the fire or electric power when the water comes to a boil. Generation of steam is a continuous process. Once a boiler is generating steam, it may take quite a long while before it is stopped. When steam is evaporated from the water, new water has to be added in to replace the water given out. As more and more steam is evaporated, the water becomes more and more concentrated with salts and other impurities. If you use your kettle for a long while, you will see some chalky deposits inside it. The fresh water supplied to replenish those lost through evaporation cannot be pure and free from salts.Even minute quantities of salt in the water will eventually become so concentrated as to form scales or deposits, because of its inverse solubility property .The deposits are usually calcium or magnesium salts. These scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture. Soft water is water that contains very little calcium or magnesium salts. They are used to feed the boilers. However, they tend to be acidic in nature. Acidic water tends to corrode.
View Complete Details
Ask Latest Price & Details
Husk Fired Boiler

Husk Fired Boiler
  • Capacity 2 to 5 TPH, F & A 100 deg.C
  • ressure 10.54 to 17.5 Kg/cm2 (g)

Huskpac Ultra, the next generation rice husk fired boilers from Thermax, are designed to provide low cost heating with fuel efficiency as high as 74 %. Bubbling bed combustion, gives higher residence time to facilitate complete combustion, thus improving efficiency.Low cost heating, Bubbling bed combustion to enhance output and efficiency, Top Loading design to avoid nozzle failure & bulging of reversal chamber, Special ferrules to protect smoke tubes from abrasive husk ash, Special ferrules to protect smoke tubes from abrasive husk ash.

View Complete Details
Ask Latest Price & Details
Pressure Reducing Station

Pressure Reducing Station
Assured accurate consistent downstream reduced pressure irrespective of fluctuations at inlet. Gives more latent heat, which is heat used in industrial equipments resulting in lower fuel consumption.Specially designed flow divider to ensure low noise levels.
View Complete Details
Ask Latest Price & Details
Boiler Chemical

Boiler Chemical
This is not good for the boiler. Corrosion can weaken the boiler. By treating the boiler water with chemicals, we can control the acidity of the water as well as the softness of the water. This will solve the problem with scales and corrosion, but it is not the ultimate cure-all. The boiler water will continue to become more and more concentrated as the steam evaporates. The next step to take is to remove the concentrated water and replenish it with fresh, soft water. The process of removing the concentrated water is called blow-down. Boiler water treatment chemicals recommendedconsidering pressures.
View Complete Details
Ask Latest Price & Details
Condensate Flash Vessel

Condensate Flash Vessel
High discharge per stroke, minimum wear and tear, Microprocessor based control with flow indicator totalizer, Weather proof with IP 65 protection suitable for outdoor installationPackaged pump easy to install, Components designed for high cycle life, Designed as per ASME section VIII div 1 conformance to international, standard ensures quality design and longer life, Designed as per ASME SEC VIII Div 1- Conformance to internationalstandard ensures quality design and longer lifeAdequately size to minimize pressure dropDesigned with optimum separation velocity to get dry steam, Steam trap sized to handle condensate at low pressure, High pressure and capacity flash vessels is available on request.Not covered under IBR-hassle free installationProvided with safety valve and pressure gauge.
View Complete Details
Ask Latest Price & Details
bellow seal valves

Bellow Seal Valves
  • Tepmratcher 300 degree C
Zero leak, Low pressure drop valves for SteamThermic fluid application for isolation purpose, M IBR approved, Zero leakEnvironmental friendly, Maintenance free, Suitable up to 300 degree , Available in IBR & Non-IB.
View Complete Details
Ask Latest Price & Details
thermax resins

Thermax Resins

Water treatment is principle application of ion exchange resins. According to requirement of water quality for various industries, several water treatment processes based on ion exchange resins are developed. Over 35 years, Tulsion exchange resins are used for water treatment

View Complete Details
Ask Latest Price & Details
antiscalant Chemicals

Antiscalant Chemicals
The Maxtreat range of antiscalants reduces membrane scaling or fouling tendencies, giving sustained performance for a longer time reducing unscheduled shutdowns and cleaning costs. It also disperses silt and colloidal particles, keeping the membrane surface clean.
View Complete Details
Ask Latest Price & Details
synthetic thermic fluid

Synthetic Thermic Fluid
  • temperature 330° C.
Synthetic HT fluid formulated from selective synthetic base fluids to meet indirect heating of closed Heat transfer system, Mineral based HT fluid formulated from selective base stocks having good thermal stability, higher VI and very high flash point.
View Complete Details
Ask Latest Price & Details
thermopac boilers

Thermopac Boilers
  • Capacity 1.0 to 3.0 million kcal/hr
Thermax offers thermal oilthermic fluid heaters, fired by a wide range of fuels. Our heaters are available in both solid fuel firing as well as oilgas firing versions so that you get the advantage of economically available fuels.Thermal Oil Heaters range from 1 million kcalhr to 3 million kcalhr. All Thermal Oil Heaters are made with a coil type design ensuring instant heat.Capacity -1.0 to 3.0 million kcalhr, Fuel Indian and imported coal, Kutch lignite, husk etc, TF outlet temperature up to 280 deg., New design incorporates.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by THERMODYNAMIC SERVICES from Kanpur, Uttar Pradesh.
Product / Services
Post Buy Requirement
TS

THERMODYNAMIC SERVICES
Sarvodaya Nagar, Kanpur, Uttar Pradesh

Verified Add Review
Call 08068051365 Ext. 692

Our Products

  1. Industrial Chemicals 3 Products available

  2. Boilers

    2 Products available

  3. Catalysts And Absorbents

    2 Products available

  4. Valves & Valve Fittings

    1 Products available

  5. Oil And Lubricants

    1 Products available

  6. Resins

    1 Products available

  7. Boiler And Boiler Parts

    1 Products available

  8. Machines And Equipments

    1 Products available

  9. Chemical Reactors & Process Tanks

    1 Products available

Other Products / Services

Our product range contains a wide range of

boiler water chemical

Boiler Water Chemical
A boiler is used for generating steam. It does this by heating water to its boiling point, after which steam will evaporate from it. When you boil a kettle of water, you will shut off the fire or electric power when the water comes to a boil. Generation of steam is a continuous process. Once a boiler is generating steam, it may take quite a long while before it is stopped. When steam is evaporated from the water, new water has to be added in to replace the water given out. As more and more steam is evaporated, the water becomes more and more concentrated with salts and other impurities. If you use your kettle for a long while, you will see some chalky deposits inside it. The fresh water supplied to replenish those lost through evaporation cannot be pure and free from salts.Even minute quantities of salt in the water will eventually become so concentrated as to form scales or deposits, because of its inverse solubility property .The deposits are usually calcium or magnesium salts. These scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture. Soft water is water that contains very little calcium or magnesium salts. They are used to feed the boilers. However, they tend to be acidic in nature. Acidic water tends to corrode.
View Complete Details
Ask Latest Price & Details
Husk Fired Boiler

Husk Fired Boiler
  • Capacity 2 to 5 TPH, F & A 100 deg.C
  • ressure 10.54 to 17.5 Kg/cm2 (g)

Huskpac Ultra, the next generation rice husk fired boilers from Thermax, are designed to provide low cost heating with fuel efficiency as high as 74 %. Bubbling bed combustion, gives higher residence time to facilitate complete combustion, thus improving efficiency.Low cost heating, Bubbling bed combustion to enhance output and efficiency, Top Loading design to avoid nozzle failure & bulging of reversal chamber, Special ferrules to protect smoke tubes from abrasive husk ash, Special ferrules to protect smoke tubes from abrasive husk ash.

View Complete Details
Ask Latest Price & Details
Pressure Reducing Station

Pressure Reducing Station
Assured accurate consistent downstream reduced pressure irrespective of fluctuations at inlet. Gives more latent heat, which is heat used in industrial equipments resulting in lower fuel consumption.Specially designed flow divider to ensure low noise levels.
View Complete Details
Ask Latest Price & Details
Boiler Chemical

Boiler Chemical
This is not good for the boiler. Corrosion can weaken the boiler. By treating the boiler water with chemicals, we can control the acidity of the water as well as the softness of the water. This will solve the problem with scales and corrosion, but it is not the ultimate cure-all. The boiler water will continue to become more and more concentrated as the steam evaporates. The next step to take is to remove the concentrated water and replenish it with fresh, soft water. The process of removing the concentrated water is called blow-down. Boiler water treatment chemicals recommendedconsidering pressures.
View Complete Details
Ask Latest Price & Details
Condensate Flash Vessel

Condensate Flash Vessel
High discharge per stroke, minimum wear and tear, Microprocessor based control with flow indicator totalizer, Weather proof with IP 65 protection suitable for outdoor installationPackaged pump easy to install, Components designed for high cycle life, Designed as per ASME section VIII div 1 conformance to international, standard ensures quality design and longer life, Designed as per ASME SEC VIII Div 1- Conformance to internationalstandard ensures quality design and longer lifeAdequately size to minimize pressure dropDesigned with optimum separation velocity to get dry steam, Steam trap sized to handle condensate at low pressure, High pressure and capacity flash vessels is available on request.Not covered under IBR-hassle free installationProvided with safety valve and pressure gauge.
View Complete Details
Ask Latest Price & Details
bellow seal valves

Bellow Seal Valves
  • Tepmratcher 300 degree C
Zero leak, Low pressure drop valves for SteamThermic fluid application for isolation purpose, M IBR approved, Zero leakEnvironmental friendly, Maintenance free, Suitable up to 300 degree , Available in IBR & Non-IB.
View Complete Details
Ask Latest Price & Details
thermax resins

Thermax Resins

Water treatment is principle application of ion exchange resins. According to requirement of water quality for various industries, several water treatment processes based on ion exchange resins are developed. Over 35 years, Tulsion exchange resins are used for water treatment

View Complete Details
Ask Latest Price & Details
antiscalant Chemicals

Antiscalant Chemicals
The Maxtreat range of antiscalants reduces membrane scaling or fouling tendencies, giving sustained performance for a longer time reducing unscheduled shutdowns and cleaning costs. It also disperses silt and colloidal particles, keeping the membrane surface clean.
View Complete Details
Ask Latest Price & Details
synthetic thermic fluid

Synthetic Thermic Fluid
  • temperature 330° C.
Synthetic HT fluid formulated from selective synthetic base fluids to meet indirect heating of closed Heat transfer system, Mineral based HT fluid formulated from selective base stocks having good thermal stability, higher VI and very high flash point.
View Complete Details
Ask Latest Price & Details
thermopac boilers

Thermopac Boilers
  • Capacity 1.0 to 3.0 million kcal/hr
Thermax offers thermal oilthermic fluid heaters, fired by a wide range of fuels. Our heaters are available in both solid fuel firing as well as oilgas firing versions so that you get the advantage of economically available fuels.Thermal Oil Heaters range from 1 million kcalhr to 3 million kcalhr. All Thermal Oil Heaters are made with a coil type design ensuring instant heat.Capacity -1.0 to 3.0 million kcalhr, Fuel Indian and imported coal, Kutch lignite, husk etc, TF outlet temperature up to 280 deg., New design incorporates.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us