Our Products
Car Interior Accessories
2 Products availableIndustrial Chemicals
2 Products availableFootwear Insole, Laces & Accessories
1 Products availableGlass Cleaner
1 Products availableGenerators, Turbines & Power Plants
1 Products availableOur product range contains a wide range of Hydraulic Oil, shock absorber oil, EP Red Grease, Multi Purpose Grease and Wet Brake Oil
Hydraulic Oil 68 is designed for use in hydraulic systems, are made up of high viscosity index refined base oil.
Hydraulic 32:(20L and 205L Barrel)
Hydraulic 46:(20L and 205L Barrel)
Hydraulic 68:(1L, 5L, 20L and 205L Barrel)
Waxpol Shock Absorber Oil is an all-weather shock absorber fluid having low pour point, excellent viscosity temperature characteristics, good oxidation stability, anti-foam and anti-wear properties, besides possessing seal compatibility, Waxpol Shock Absorber Oil has good damping effect which increases life of Shock Absorber.
175ml and 350ml
NLGI GC LB CertifiedPremium High Performance GreaseHigh Drop PointProvides service for 75, 000 kms or more under ideal operating conditionsFortified with EP additive for severe service conditionMaximum lubrication with protectionExcellent water resistanceProtection against rust & corrosionRecommended for Cars, Trucks, Buses, Heavy Vehicles and all types of Farm & Industrial Machinery.Packaging: 1 kg & 5 kg Poly Container
A premium quality Lithium based grease, provides maximum protection against heat, rust & corrosion. Resists meltdown at higher temperatures and highly resistant to water.
Ensures maximum lubrication.High temperature stability.
50g, 90g, 200g (Tube & Pouch), 500g, 1kg, 2kg, 3kg Poly Container, 5kg, 18kg Plastic Bucket & 180kg Barrel.
Meet specifications of APIGL-4, MIL- L-2105, ALLISON C3, C4, CaterpillarTO-2, JDM- J20C(John Deere), 10W-30(Gradeonly), ZFTE-ML(03E, 05F) andVolvo-WB101.
Applicable for all new generation tractors, oil-immersedbrakes, Agricultural tractors transmissions and Hydraulic systems.
Direction for use
Maximum Lubrication with Protection.Superior resistance to rust and corrosion.Contains multi-purpose sulphur phosphorous additives for severe service.Excellent foam resistance.Excellent low temperature fluidity.
500ml, 1L, 5L, 20L
Waxpol Power Steering Fluid is a premium formulation of high quality base oil and special additives.
Provides optimum protection in all Power Steering System.Protects Power Steering system from wear.Resists foaming oxidation, corrosion and rusting.Effective heat dissipation.
250ml, 500ml, 1L and 5L
An ISI marked grease, specially formulated to handle the disk & drum bearing applications. It contains corrosion inhibitors, anti-wear & anti-oxidation additives, offering superior protection in challenging environments.
90gm, 200gm poly container, 200gm pouch, 500gm, 1kg, 2kg, 3kg, 5kg, 18kg and 180kg Barrel
75 gm & 300 gm. Poly Container
Modern high efficiency engines have higher operating temperature and accumulate deposit's, sludge and lacquer inside the engines; especially in the crank case, piston skirt and ring grooves, valves and tappets, lube oil lines and upper combustion chamber which rob power, accelerate wear and reduce performance to cause serious drivability problems such as engines knocks, rough idle, reduced fuel economy and higher emissions. Waxpol High Performance Engine Flush Concentrate is a powerful Detergent base blend of cleaners which Safely, Quickly and Effectively softens, emulsifies, dissolves and removes accumulated deposited, sludge's and lacquer. It helps free sticky valves lifters and piston rings and prevents contamination of fresh oil to maintain efficient oil circulation throughout the entire engine for improved performance through efficiency, fuel economy, lower emissions and reduction in wear.
One 300 ml can is sufficient for up to 6 liters of oil.
Check crankcase to make sure that oil is up to a safe level. Before changing oil and oil filter, add entire can of Waxpol engine flush to the engine oil at running temperature. After adding the product allow engine to run at idle speed for approx. 5 minutes. Do not drive or race engine, stop the engine and then change the oil and the filter as usual.
300 ml can.
Suitable for all Brake & Clutch System except Mineral Oil System. This Fluid exceeds performance of US Federal Std. 116 DOT-3 SAE J 1703 & IS 8654.
Keep container capped as it is hygroscopic. Keep out of reach of children. Harmful if swallowed.
Avoid eye contact.
Metal polish liquid consists essentially of suitable suspension of polish powder in suitable petroleum solvent and ammonia soap of fatty acid having no detrimental effect.
Apply with a soft cloth pad and buff to bright finish by dry soft cloth.
It is a synthetic brake fluid to give superior performance over a wide temperature range. It has a good vapor lock characteristics and has required anti-corrosion, anti-wear properties for a long trouble tree Hydraulic Braking system.
For all types of automotive hydraulic brakes and are suitable for all climates.
This is new age automotive coolant has anti-rust and anti-corrosive properties. It is ideal for all weather condition as it keeps engine cool in extreme heat and retains liquid form even in extreme cold. It lubricates the water pump and protects the engine from corrosive effects of water.
Drain out the used coolant and flush with water.
For General Application:
Dilute 1 part of coolant and 4 part of water.
For extreme winter conditions and special anti-freeze requirements:
Dilute 1 part of Waxpol Coolant and 1 part of water.Check level periodically and top up with Waxpol Coolant.
Keep out of reach of children.If accident occurs seek medical attention.Do not take radiator cap when engine is hot.
It is a performance enhancer eg: API SC to SD, CD to CE and SAE 50 in mono and multigrade engine oils.
The highest possible protection against wear and humidity and leaves a long lasting film that repels dust/dirt and will not evaporate. Excellent for ready to fire.