The Standard Agro Engineers

Bhavnagar Road, Rajkot, Gujarat

Cooling : Engine Cooling is efficiently handled by run-through water supply. A radiator or a cooling tank could also be provided if required. Rotation : Standard rotation is clockwise, facing flywheel keeping exhaust on the left hand side. Fuel Injection Equipment : MICO (Bosch) or USHA Fuel Injection Equipment or equivalent. Cylinder Liner : The Cylinder liner is Hard Chrome Plated. Air cleaner : Oil bath type Air Cleaner is Provided to clean incoming air. Use of clean air increases the life of Cylinder liner.

Type : Vertical, SingleDoubleTrippleCylinder Air CooledWater Cooled, totally enclosed, compression ignition, four stroke cycle, cold starting diesel engine. Combustion System : Direct injection in open type combustion chamber provided in an aluminum alloy piston crown in combination with long stem multihole nozzle, results in low fuel consumption and easy starting. Fuel systems : Fuel is supplied to the fuel pump by gravity feed through an efficient paper element filter, fuel tank capacity 9 liters. Lubrication : Force feed lubrication to main and large end bearing and camshaft bush. Other working parts are splash lubricated. A bypass filter is provided for cleaning the lubrication oil. Lub. oil sump capacity at higher level mark of dipstick. Cooling : Engine cooling can be arranged by a run-through water system of radiator or cooling tank. In air cooled engine, engine is cooled by Breeze of air though streamline cooling.

Cub Diesel Engines are first of their type - STANDARD CUB diesel engine pump set are the result of STANDARD AGRO ENGINEERS's extreme efforts. In India, the STANDARD Brand Cub Diesel Engines are unique and manufactured only by STANDARD AGRO ENGINEERS.

This unique and Standard Cub Diesel Engine gives more water outflow in a little time as well as less fuel consumption.

There are lots of extra-ordinary functions for this innovative Cub Diesel Engine such as:

• 5 & 6.5HP, 2400 RPM Single cylinder, vertical water cooled diesel engine
• Very low fuel consumption of about 750ml. Per hour with 5.5 ltr
• 100% Indian products with 1 year warrantee
• Replacement parts easily available at any time
• Easily run continuously for 24 hours
• Pumpset available with 2.5" X 2, 3" X 2.5", 3" X 3" and 4" X 4"
• Special purpose High Head Pumpset also available
• Government subsidy and ISI approved
• Engine chamber oil capacity 1.5 Ltr
• 'Oil Seal' type 'Oil Bath' double bearing pump design

Type :Vertical, Single/Double/Tripple/Cylinder Air Cooled/Water Cooled, totally enclosed, compression ignition, four stroke cycle, cold starting diesel engine.

Combustion System :Direct injection in open type combustion chamber provided in an aluminum alloy piston crown in combination with long stem multihole nozzle, results in low fuel consumption and easy starting.

Fuel systems :Fuel is supplied to the fuel pump by gravity feed through an efficient paper element filter, fuel tank capacity 9 liters.

Lubrication :Force feed lubrication to main and large end bearing and camshaft bush. Other working parts are splash lubricated. A bypass filter is provided for cleaning the lubrication oil. Lub. oil sump capacity at higher level mark of dipstick.

Cooling :Engine cooling can be arranged by a run-through water system of radiator or cooling tank. In air cooled engine, engine is cooled by Breeze of air though streamline cooling.

Rotation :Standard rotation is clockwise looking at the fly wheel, Engine with reverse rotation can also be built against specific requirement.

Starting :The engine is designed for staring by hand.

Drive :Standard power take-off is from flywheel side. Power take-off from gear end at half-speed can be provided if specially ordered.

Standard Equipment :Starting handle, Exhaust silencer, Air cleaner and hand tools.

Vertical Diesel Engine is rated on the effective horse power at engine crankshaft on a maximum load for continuous running. Each engine is tested as per IS : 111170 to give continuous rating.

Cooling :Engine Cooling is efficiently handled by run-through water supply. A radiator or a cooling tank could also be provided if required.

Rotation :Standard rotation is clockwise, facing flywheel keeping exhaust on the left hand side.

Fuel Injection Equipment :MICO (Bosch) or USHA Fuel Injection Equipment or equivalent.

Cylinder Liner :The Cylinder liner is Hard Chrome Plated.

Air cleaner :Oil bath type Air Cleaner is Provided to clean incoming air. Use of clean air increases the life of Cylinder liner.

Standard Equipments :Pulley, Spanner, set, Screw Driver, Oiler, Starting Handle, Air Cleaner, Silencer, Fuel Tank, Tool Bag Instrunction Manual and Hose Nipple.

Direct injection in open type combustion chamber provided in an aluminum alloy piston crown in combination with long stem multihole nozzle, results in low fuel consumption and easy starting. Fuel is supplied to the fuel pump by gravity feed through an efficient paper element filter, fuel tank capacity 9 liters.