The Indian Electric Co

Pune, Maharashtra

Specialty :

• High efficiency for low operating costs
• Compact design means low space requirements
• Robust grey cast iron housing
• High axial and radial load capacities enable reliable operation
• Quiet running
• Application-specific versions

Specialty :

• Slim design for space-saving installation
• Robust grey cast iron housing
• High efficiency for low operating costs
• Various bearing concepts guarantee high axial and radial load capacities
• Quiet running
• Robust design for long life and easy maintenance
• Cheap to run thanks to low maintenance
• Application-specific versions

Specialty :

• High efficiency for low operating costs
• Robust design for long life and easy maintenance
• Cheap to run thanks to low maintenance
• Robust grey cast iron housing
• Various bearing concepts guarantee high axial and radial load capacities
• Application-specific versions

Versions :

• Solid and hollow shaft (keyed, Gripmaxx and Shrink disc), Push-on, flange and foot mounted versions.
• Angled gear units

Specialty :

• Optimum sealing protects against lubricant leakage
• Low noise operation reduces noise nuisance
• High torque capacity
• Increased lubricant life minimises maintenance costs
• Symmetrical design
• Standard B14 flange on the output side as standard
• 6 possible installation positions suitable for a wide range of applications
• Mirror-image and inclined installation possible
• Same housing size and installation dimensions for all gear ratios (2- and 3- stage)
• Input and output shafts can be adapted to customers' dimensions
• Great reliability
• Long service life
• High precision

Versions :

• Various output shaft bearings for optimum adaptation to the application
• Many output flange options
• Various methods of attaching or mounting the motor
• Effective cooling with air or water
• Supply of ready to install complete systems with coupling, brakes, monitoring, etc. is possible.

Specialty :

• Optimum sealing protects against lubricant leakage
• Low noise operation reduces noise nuisance
• High torque capacity
• Increased lubricant life minimises maintenance costs
• Symmetrical design
• Standard B14 flange on the output side as standard
• 6 possible installation positions suitable for a wide range of applications
• Mirror-image and inclined installation possible
• Same housing size and installation dimensions for all gear ratios (2- and 3- stage)
• Input and output shafts can be adapted to customers' dimensions
• Great reliability
• Long service life
• High precision

Versions

• hdx Robust, long-life roller bearings
• Effective fan cooling versions
• Wide range of possible motor attachments
• Supply of ready-to-install complete systems with coupling, brakes, monitoring, etc. is possible
• Attached, easily accessible back stops for simple change of the direction of rotation
• Proven, one-piece UNICASE housing design

Specialty :

• Robust design
• Economical drive solution for simple tasks
• High precision regulation with current vector control
• 4-quadrant operation (1, 5 / 2, 2kW)
• PLC functionality for functions close to the drive unit (PLC on Board)
• Energy-saving function for partial load operation
• Control and parameterisation tools and simple parameter structure
• Integrated line filter for compliance with EMC regulations
• Operation of synchronous and asynchronous motors
• Control and closed loop regulation

Description :We The Indian Electric Co. are Authorised Dealer of Siemens 1PQ8 Force Cooling Converter Duty Motors having range from 355 KW to 1250 KW or 475 HP to 1675 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Siemens 1PQ8 Force Cooling Converter Duty Motors are available in 3000 RPM, 1500 RPM, 1000 RPM and 750 RPM with respect to and 2 Pole, 4 Pole, 6 Pole and 8 Pole with cast iron body. This motors are compatible with S1 duty and with IE2 & IE3 efficiency. Available Frame sizes are from 355 to 500 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting) available with Terminal Box Position at RHS Side. Siemens 1PQ8 Force Cooling Converter Duty Motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. This motors are also available with specialties i.e. VPI Suitable, Double Shaft, T.B Location: LHS / TOP.

Also available in the following specialty

• VPI / VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS / RHS
• Motors with 690V D as Grid Supplied Standard Voltage

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application :

• Compressors
• Conveyors
• Positive Displacement Pumps
• Mixers
• Hoists

TECHNICAL FEATURES :

• Microprocessor Based Automatic Controller With Power Display.
• All Major Components Are Of Standard Makes Like, Siemens, L&T, Epcos, Neptune Etc.
• All The Components Are Carefully Integrated For Reliable Performance And Longer Life.
• Used Small Correction Steps To Maintain Accurate Setting.
• Contactors (With MCBs Or MCCBs As Backup Protection) Are Used To Switch On Capacitors With Spiral Cond uctor Design To Minimize Switching Surges.
• Cooling Facility In Capacitor Chambers.
• In-built Time Delay For Switching ON Of A Capacitor Bank To Avoid Impulse Signal Operation.
• All Capacitor Feeders Have Auto/ Manual Mode Facility With Fuse/MCB Protection And Isolation.
• Very Low Watt Losses, Capacitors Are Used.

Also available in the following specialty

• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS/RHS

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:Pump, Fan, Compressor, Paper Machinery, Dairy Equipment, Hydraulic press, HVAC, Grinding Machine, Vertical Boring, Milk Pumps, Chilling Plants, Blenders, Pulverize, Condensers, Agitators, Air Compressors, Centrifuges, ID & FD Fans, Cooling Tower, Cold Storages, Plastic Machinery, Machine Tool, Air Conditioning, Textiles Machinery.

Also available in the following specialty

• VPI/VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS/RHS

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:Pump, Fan, Packing Machinery, Coiler/De-coiler, Agro Equipment, Food Processing Equipment, Agitator, Milling Machine, Drilling Machine, Crane & Hoists, Conveyors, Machine Tool, Material Handling, Crusher, VSI, Roller Tables, Hammers / Press, Ball Mill, Hot Dryers, Heavy Duty Conveyors, Mixers, Reactors, Expellers, Jaw Crushers, Disintegrators.

Also available in the following specialty

• VPI/VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS/RHS

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:The Crane Motors Are Duty Type Rated For Developing High Starting Torque With Low Starting Current. The Motors Are Designed To Withstand Stresses Due To Frequent Starts/Stops And Reversals. Also, A Rapid Acceleration Is Achieved By High Pull Out Torque/Rotor Inertia Ratio.

• Crane Duty and Hoist Duty Applications Including LT & CT Drives.
• Material Handling.
• Weirs and Sluices.
• Lift Duty.
• Auxiliary Motors in Rolling Mills.
• Material Handling Equipment.
• Conveyors
• Loader / Unloader
• Winch

Also available in the following specialty

• VPI/VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS/RHS

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:Pump, Fan, Packing Machinery, Coiler/De-coiler, Agro Equipment, Food Processing Equipment, Agitator, Milling Machine, Drilling Machine, Crane & Hoists, Conveyors, Machine Tool, Material Handling, Crusher, VSI, Roller Tables, Hammers / Press, Ball Mill, Hot Dryers, Heavy Duty Conveyors, Mixers, Reactors, Expellers, Jaw Crushers, Disintegrators.

We Have Applied KORND0RFER Closed Transition Technology Advanced With Primary - Off Logic To All Our Reduced Voltage Auto-Transformer Starters. Multiple Motors Can Be Handled With Our Panels, Which Are Made As Per The IEC/NEMA Standards, lncorporating The Need For Multiple Starters As Per The Customer's Requirements. We Use RITTAL Enclosures For Our Air-Cooled Reduced Voltage Auto-Transformer Starters. Our Oil-Cooled Reduced Voltage Auto-Transformer Starters, Are Also Made As Per The IEC/NEMA Standards, Have Transformers Based On The CORE Type Technology. These Oil Immersed Reduced Voltage Auto-Transformer Starter Enclosures Are Made As Per Our Specifications, Under Strict QA Systems.

KEY HIGHLIGHTS :No need to manually remove the stones stuck in the crusher

• SYEMCO starter keeps your motor safe
• Considerable reduction in energy bill
• Saves times and improves productivity
• Reduction in Billed Maximum Demand'

Friction Loads : Expanders, Oil Expellers, Extruders, Dall Mills Rolls, Rubber Mixing Mills, Ammonia Compressors, Air Compressors, Cookers, Toasters, Hammer Mills, Disintegrators, Flour Mills, Cotton Ginning Press, Sigma Machines, Flakers etc.

KEY HIGHLIGHTS :

• With The Help Of Inching Provision With Extra Torque, 'Jam' Conditions Are Easily Overcome During The Start Of The Machine.
• The Starter Is Designed As Such It Does Not Affect The Motor Winding When Extra Torque Mode Is Used As Well As There Is No Obervence Of Mechanical Stresses.
• MD Is In Control Because Of Superior Design And Working Principle Of The Starter.

ROTASTART 1s A Specifically Designed System For Starting Slip-Ring Induction Motor, Which Consists Of Control And Protection System With Inducer For Rotor Circuit. The Inducer Is Physically Much Smaller Than The Equivalent Resistance, Requires Only One Shorting Contactor Because Of Which The Size, And Complexity & Cost Of The Overall System Gets Considerably Reduced. All The Components Are Enclosed In A Single Dust & Vermin Proof Enclosure.

KEY HIGHLIGHTS :

• Naturally Automatic Step-Less Operation Intrinsically Load Sensitive Starting.
• Constant Torque, Constant Current Acceleration Suitable For Online Plugging.
• Provides Load Sensitive Starting And Smooth Time Current Characteristic.
• System Has Advantage Of Size, Simplicity And No Maintenance.
• Required Impedance Can Be Achieved By Adjustment Of Tapping Of The Inducer.

Description:We The Indian Electric Company are the Authorised Dealer of Bharat BijleeCrane Duty Squirrel Cage Motors having range from 0.37 KW to 200 KW & 0.5 HP to 270 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Bharat BijleeCrane Duty Squirrel Cage motors are available in 1500 RPM, 1000 RPM and 750 with respect to 4 Pole, 6 Pole and 8 Pole with cast iron body. This motors are compatible with S3, S4 & S5 duty with CDF 25 / 40 / 60& 60 / 150 / 300 Starts per hour. Available Frame sizes are from 71 to 315 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting), B14 (Face Mounting) available with Terminal Box Position at TOPSide.Bharat Bijlee Crane Duty Squirrel Cage motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. Ambient temperature of Bharat Bijlee IE2 motors are 20 C to +45 C. This motors are also available with specialties i.e. VPI / VFD Suitable, IGT, Double Shaft Extension, T.B Location: LHS / TOP.

Also available in the following specialty

• VPI / VFD Suitable
• IGT
• T.B Location: RHS / LHS
• Double Shaft Extension

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:The Crane Motors Are Duty Type Rated For Developing High Starting Torque With Low Starting Current. The Motors Are Designed To Withstand Stresses Due To Frequent Starts/Stops And Reversals. Also, A Rapid Acceleration Is Achieved By High Pull Out Torque/Rotor Inertia Ratio.

• Crane Duty and Hoist Duty Applications Including LT & CT Drives.
• Material Handling.
• Weirs and Sluices.
• Lift Duty.
• Auxiliary Motors in Rolling Mills.
• Material Handling Equipment.
• Conveyors
• Loader / Unloader
• Winch

Description :We The Indian Electric Company are the Authorised Dealer of Bharat BijleeCrane Duty Slipring Motors having range from 1.1 KW to 10 KW & 1.5 HP to 13.5 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Bharat Bijlee Crane Duty SlipringMotors are available in 1000 RPM (6 Pole) only with cast iron body. This motors are compatible with S3, S4 & S5 duty with CDF 25 / 40 / 60& 60 / 150 / 300 Starts per hour. Available Frame sizes are from 100 to 160 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting)available with Terminal Box Position at TOP Side.Bharat Bijlee Crane Duty Slipring motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. Ambient temperature of Bharat Bijlee Crane Duty SlipringMotors are 20 C to +45 C. This motors are also available with specialty of Double Shaft Extension.

Also available in the following specialty

• Double Shaft Extension

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Description :We The Indian Electric Company are the Authorised Dealer of Siemens IE4 Motors having range from 0.37 KW to 200 KW & 0.5 HP to 270 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Siemens IE4 motors available in 3000 RPM, 1500 RPM, 1000 RPM with respect to 2 Pole, 4 Pole and 6 Pole with cast iron body and S1 duty. Available Frame sizes are from 71 to 315 frame. Mounting options are B3 (Foot Mounting), B5 (Flange Mounting), B35 (Foot cum Flange Mounting) available with Terminal Box Position at TOP position. IE4 motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. Ambient temperature of Siemens IE4 motors are 20 C to + 50 C. Siemens IE4 motors are available with specialities of VPI / VFD Suitable, Thermistors, Insulated Bearing, Roller Bearing, Space Heater, Forced cooling, T.B Location: RHS / LHS, B14 Face Mounted.

Also available in the following specialty

• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• VPI/VFD Suitable
• T.B Location: RHS / LHS
• B14 Face Mounted

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Description :We The Indian Electric Company are the Authorised Dealer of Siemens IE3 Motors having range from 0.18 KW to 315 KW & 0.25 HP to 425 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Siemens IE3 motors available in 3000 RPM, 1500 RPM & 1000 RPM with respect to 2 Pole, 4 Pole and 6 Pole with cast iron body with S1 duty. Available Frame sizes are from 71 to 355 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting), B14 (Face Mounting) and B34 Foot cum Face Mounting available with Terminal Box Position at TOP (Diagonally Split Terminal Box) Side. IE3 motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. Ambient temperature of Siemens IE3 motors are 20 C to +50 C. Siemens IE3 motors are available with specialities of VPI / VFD Suitable, Thermistors, Insulated Bearing, Roller Bearing, Space Heater, Forced cooling, T.B Location: RHS / LHS, B14 Face Mounted, Aluminium Body Enclosure Available on Request, Suitable for Inverter Operation (VFD Suitable as a Standard).

Also available in the following specialty

• VPI/VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS / RHS
• Aluminium Body Enclosure Available on Request
• Suitable for Inverter Operation (VFD Suitable as a Standard )

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:Pump, Fan, Compressor, Paper Machinery, Dairy Equipment, Hydraulic press, HVAC, Grinding Machine, Vertical Boring, Milk Pumps, Chilling Plants, Blenders, Pulverize, Condensers, Agitators, Air Compressors, Centrifuges, ID & FD Fans, Cooling Tower, Cold Storages, Plastic Machinery, Machine Tool, Air Conditioning, Textiles Machinery

Description :We The Indian Electric Company are the Authorised Dealer of Siemens IE2 Motors having range from 0.18 KW to 315 KW & 0.25 HP to 425 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Crompton IE2 motors available in 3000 RPM, 1500 RPM and 1000 RPM with respect to 2 Pole, 4 Pole and 6 Pole with cast iron body with S1 duty. Available Frame sizes are from 71 to 355 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting), B14 (Face Mounting), B34 (Foot Cum Face Mounting) available with Terminal Box Position at TOP (Diagonally Split Terminal Box) Side. Siemens IE2 motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. Ambient temperature of Siemens IE2 motors are 20 C to +50 C. Siemens IE2 motors are available with specialities of VPI / VFD Suitable, Thermistors, Insulated Bearing, Roller Bearing, Space Heater, Forced cooling, T.B Location: RHS / LHS, B14 Face Mounted, Aluminium Body Enclosure Available on Request, Suitable for Inverter Operation (VFD Suitable as a Standard).

Also available in the following specialty

• VPI/VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS / RHS

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application:Pump, Fan, Packing Machinery, Coiler/De-coiler, Agro Equipment, Food Processing Equipment, Agitator, Milling Machine, Drilling Machine, Crane & Hoists, Conveyors, Machine Tool, Material Handling, Crusher, VSI, Roller Tables, Hammers / Press, Ball Mill, Hot Dryers, Heavy Duty Conveyors, Mixers, Reactors, Expellers, Jaw Crushers, Disintegrators.

Description :We The Indian Electric Company are the Authorised Dealer of Siemens Crane Duty Squirrel Cage Motors having range from 0.18 KW to 200 KW & 0.25 HP to 270 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Siemens Crane Duty Squirrel Cage motors are available in 1500 RPM and 1000 RPM with respect to 4 Pole and 6 Pole with cast iron body. This motors are compatible with S3, S4 & S5 duty with CDF 25 / 40 / 60 & 60 / 150 / 300 Starts per hour. Available Frame sizes are from 71 to 315 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting), B14 (Face Mounting), B34 (Foot Cum Face Mounting) available with Terminal Box Position at TOP Side. Siemens Crane Duty Squirrel Cage motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. This motors are also available with specialties i.e. VPI / VFD Suitable, IGT, Double Shaft Extension, T.B Location: LHS / TOP.

Also available in the following specialty

• VPI / VFD Suitable
• IGT
• T.B Location: LHS / RHS
• Double Shaft Extension

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application :The Crane Motors Are Duty Type Rated For Developing High Starting Torque With Low Starting Current. The Motors Are Designed To Withstand Stresses Due To Frequent Starts/Stops And Reversals. Also, A Rapid Acceleration Is Achieved By High Pull Out Torque/Rotor Inertia Ratio.

• Crane Duty and Hoist Duty Applications Including LT & CT Drives.
• Material Handling.
• Weirs and Sluices.
• Lift Duty.
• Auxiliary Motors in Rolling Mills.
• Material Handling Equipment.
• Conveyors
• Loader / Unloader
• Winch

Description :We The Indian Electric Co. are Authorised Dealer of Siemens 1LA8 N Compact Motors having range from 355 KW to 1250 KW or 475 HP to 1675 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Siemens 1LA8 N Compact Motors are available in 3000 RPM, 1500 RPM, 1000 RPM and 750 RPM with respect to and 2 Pole, 4 Pole, 6 Pole and 8 Pole with cast iron body. This motors are compatible with S1 duty and standard with IE3 & IE4 efficiency. Available Frame sizes are from 355 to 500 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting) available with Terminal Box Position at RHS Side. Siemens 1LA8 N Compact Motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. This motors are also available with specialties i.e. VPI / VFD Suitable, Double shaft, T.B Location: LHS / TOP.

Also available in the following specialty

• VPI / VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS / RHS
• Motors with 690V D as Grid Supplied Standard Voltage

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application :Pump, Fan, Compressor, Paper Machinery, Dairy Equipment, Hydraulic press, HVAC, Grinding Machine, Vertical Boring, Milk Pumps, Chilling Plants, Blenders, Pulverize, Condensers, Agitators, Air Compressors, Centrifuges, ID & FD Fans, Cooling Tower, Cold Storages, Plastic Machinery, Machine Tool, Air Conditioning, Textiles Machinery.

Description :We The Indian Electric Co. are Authorised Dealer of Siemens Champion Series Motors having range from 250 KW to 315 KW or 335 HP to 425 HP. This motors are 3 phase with 415 volt & Frequency of 50 Hz. Siemens Champion Series Motors are available in 3000 RPM, 1500 RPM, 1000 RPM and 750 RPM with respect to and 2 Pole, 4 Pole, 6 Pole and 8 Pole with cast iron body. This motors are compatible with S1 duty and standard with IE3 & IE4 efficiency. Available Frame sizes are from 355 to 500 frame. Mounting options are B3 (Foot Mounting) B5 (Flange Mounting), B35 (Foot cum Flange Mounting) available with Terminal Box Position at RHS Side. Siemens Champion Series Motors are available in insulation class F & temperature rise limited to Class B with IP 55 degree of protection. This motors are also available with specialties i.e. VPI / VFD Suitable, Double shaft, T.B Location: LHS / TOP.

Also available in the following specialty

• VPI / VFD Suitable
• Thermisters
• Insulated Bearing
• Roller Bearing
• Space Heater
• Forced cooling
• T.B Location: LHS / RHS

Warranty : Motors are covered by warranty under proper use, for faulty material or workmanship for 12 months from the date of commissioning or 18 months from the date of dispatch whichever is earlier.

Application :Pump, Fan, Compressor, Paper Machinery, Dairy Equipment, Hydraulic press, HVAC, Grinding Machine, Vertical Boring, Milk Pumps, Chilling Plants, Blenders, Pulverize, Condensers, Agitators, Air Compressors, Centrifuges, ID & FD Fans, Cooling Tower, Cold Storages, Plastic Machinery, Machine Tool, Air Conditioning, Textiles Machinery.