Our Products
Pipe Elbows
2 Products availableHotel And Commercial Cooking Equipment
2 Products availableAdapter
2 Products availableGas Regulators
2 Products availableOur Complete range of products are t type burner, Corrugation Burner, Infra-Red Burner, Pilot Burner and Fishtail burner.
These high pressure burners are recommended for heating curved surface vessels as they produce powerful torch type flames. O Working pressure should not be varied by more than +0.07 kgf/cm2 (+1 psig). Use of these burners at pressure higher than 0.42 kgf/cm2 (6 psis) will result in sastage of gas. At a pressure of 20 psig. the gas consumption per hour will be double. O The nomenclature T-22 of T-35 is derived from the gas consumption rate which is 2.2 lb/hr for T-22 and 3.5 lb/hr for T-35, while T symbolizes torch. O The burner rated heat outputs are valid for altitudes upto 2000 ft above sea level. If altitude is more than 2000 ft, rated heat outputs should be reduced @4% per extra 1000 ft altitude.
This system replaces the existing electric heaters fitted in the roller with gas burners and is operated on LPG. This system is fully automatic, safe and highly economical. The performance of LPG as well as PNG is very satisfactory.
We have installed this system on machines size from 42 inch till 75 inch flute size on Single Profile as well as double profile machines. There is need to provide suitable Gas bank for this application and we take up this jon as well. The gas bank size depends upon number of machines and size of machines working in a single shed. This is to ensure that there is no residual gas in the cylinders. For Pipe gas the piping only is required to be taken up to the machine.
These gas burners can be adapted to almost all purposes, where radiant heat is required. Industrial uses include brooding, curing, drying. Food processing, Metal fabricating, finishing, textile drying and weld preheating.
In tune with advanced market developments, we are providing an exclusive range of Pilot Burner. These pilot burners are available in several specifications, manufactured using high grade approved raw material with the help of the latest technology. The pilot burners offered by us are used in hotels and restaurants for preparing different types dishes. Apart from this, our clients can avail these burners from us at market leading prices.
Features:
These burners can be supplied in any ribbon length from 100 mm to 400 mm (4" to 16")
With huge technical knowledge & industrial experience, we are exclusively involved in providing a wide spectrum of RV-Burner that is used for making chapatti, dosa, omelette. They are manufactured in a way to produce two linear flames (V-shape) with uniform and wider heat distribution. Our offered burners are produced using optimum grade raw material and advanced technology in adherence to universally accepted standards. As our offered burners remain in great demand across the nation, they are made available in a variety of sizes and lengths, as per detailed specifications from our clients. In addition to this, these are tested against various quality parameters as set by the international industry.
Features:
These high pressure burners are recommended for heating flat surface vessels. The produce sunflower shaped flame. Working pressure should not be varied by more than 0.07 kgf/cm (+1psig). Use of these burners at pressure higher than 0.42 kgf/cm (6 psig), will result in wastage of gas. At a pressure of 20 psig(1.40kgf /cm:), the gas consumption per hour will be double. The nomenclature M-22 and M-35 is derived from the gas consumption, which is 2.2 lb/hr for M. 22 and 3.5 lb/hr for M.3.5, while M stands for Marguerite. The burner rated heat outputs are valid for altitudes upto 2000 ft above sea level. If altitude is more than 2000 ft, rated heat outputs should be reduced 4 4% per extra 1000 ft altitude.
Ideal heavy duty burners for bulk frying and general heating requirements of industries and pharmaceuticals, produce powerful torch type blue flames. These are available in four sues.
We are identified as one of the most competent enterprises of this industry, engaged in offering a wide gamut of S Type Burner that is extensively used as an immersion heater or a space heater where the availability of secondary air is low. These burners dealt in by us are manufactured using premium grade raw material and contemporary technology in conformity with set universally accepted norms of quality. In addition to this, our offered burners are highly appreciated by our clients for their several qualitative features, associated as per variegated requirements of our clients.
Features:
We are passionately engaged in supplying an exclusive range of Torch Burner that is precisely manufactured using topmost grade raw material and the latest technology in tandem with set industrial norms. These are available in different shapes & sizes according to client-specific requirements and are highly appreciated for their compact design and durability. Apart from this, the offered range is stringently tested against various parameters of quality under the supervision of our skilled professionals.
Features:
Available with us is an attractively designed collection of Gas Burner - Tripod Shape that comes along with a regular shaped knob. The products, offered by us, are highly cost-effective and reasonably priced taking into consideration the monetary constraints of our clients. Besides, we can customized these products as per the specifications, given by the clients.
Canteen Burners (High Pressure/Low Pressure):
Max Working Pressure | Gas Consumption | Rated Heat Output |
0.035 kgf/cm2 (0.5 psig) | 0.47 kg/hr (1.05 lb/hr) | 5650 kcal/hr (22300 btu/hr) |
Being a quality oriented organization, we are engaged in manufacturing and supplying Tandoor Burners. These highly qualitative products are manufactured using superior grade material and sophisticated machines. We manufacture these products in adherence with high industry standards.
Max Working Pressure | Gas Consumption | Rated Heat Output |
0.035 kgf/cm2 (0.5 psig) | 0.15 kg/hr (0.335 lb/hr) | 1800 kcal/hr (7090 btu/hr) |
We are involved in offering a wide gamut of Square Canteen Burner that is manufactured using high grade raw material and the latest technology with the set universal standards. These burners are tested against various parameters under the strict supervision of our adroit professionals to ensure flawless deliveries. In addition to this, these burners are available in various sizes & dimensions and can also be customized as per various specifications from our prestigious clients.
Specification:
Features:
We are a leading Manufacturer & Exporter of Diesel Type Burner such as Diesel Type Burner Straight and Diesel Type Burner L-Type from India.