The Bharat Group

Parvatiya Colony, Faridabad, Haryana

De-Mattia Flex Tester has a set of grips to hold test specimens in two tiers with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and unflexing action. The set of grip has two-fixed grip and one large reciprocating grip positioned between them in order to flex half of the test specimen while the other half is being unflexed. The reciprocating grip is slide on hardened and ground rods made of high carbon steel. The reciprocating motion is provided by an eccentric and linkage mechanism driven by an electric motor through V-belt and pulleys. A six digit electronic counter is provided for indicating the number of the test cycles undergone.
The equipment is build on a rigid fabricated base plate and finished in metallic painting and bright chrome/zinc plating to give it a corrosion resistant finish. Moulding dies for preparing test specimen, and jig and punch assembly for making initial crack in test specimen for crack growth test are available as optional accessories.

Bottle Circumference Tape

Pie Tape

Melt Flow of thermoplastic material is defined as the rate of flow in grams per ten minutes of extrude of molten resins through a jet of a specified length and diameter under prescribed conditions of temperature, load & piston position in a cylindrical cavity inside a heated metallic tube barrel at the measurement is being made.
Melt Flow Index Apparatus for Plastic consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The tube has a whole parallel to its bore for placing the thermocouple junction. The heater logged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with a 3 mm thick insulation of PTFE to prevent sticking of the extrude. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrude out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER at other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extradite are also supplied with the equipments.

RELATED STANDARD :ASTM-D- 1238 – 1982 : Standard test method for flow rate of Thermoplastic by Extrusion Plastometer.

Digital Balance weighs up to two decimal numbers, so it is very useful to weigh samples & chemicals in Paper, Plastic, textile laboratories, College & Universities.

Features :

• Weighs up to two decimal numbers.
• Maximum capacity 300 gms.
• Very delicate & sophisticated instrument.
• Modern design with latest technology.
• Supplied with a transparentcabinet to avoid air for accuracy.
• Complete with accessories as A.C adaptor.

The Bharat Group is Polariscope Manufacturer in India guarantees precise and accurate testing. A polariscope is a device that uses polarized light to visualize and analyze the stress distribution in transparent materials like PET Preform and Glass. The device consists of a light source, a polarizer, and an analyzer, which are arranged in such a way that the light beam passes through the material under investigation. The material is then viewed through the analyzer, which reveals any stress patterns within it.
Ensure the quality and clarity of your glass or preform products with our Polariscope. The use of our polariscope  is widespread in materials science and laboratories, where it is used to analyze the properties of materials such as glass, plastics, PET preform etc. For example, it can be used to identify stress points in glass objects such as windshields or bottles, to determine the quality of a plastic injection mould, or to analyze the structural integrity of Transparent Plastic components like PET Preform.
‘TBG’ Polariscope is used to view the internal material stresses and material flow characteristics of PET preforms and containers. This is ideal for laboratory use and at-the-line preform and bottle inspection
Defects in preform can be easily detected by using this equipment. When a preform is held parallel to viewing field colour pattern is seen known as isochromatic fringe. This indicates magnitude of the stresses introduced during moulding process. When a preform is held 45 deg to viewing field a coloured pattern known as isoclinic is seen, this indicates direction of stresses.
‘TBG’ Polariscope is used in the preform assembly to check the possible defect in the preforms. Take the precautions at the early stage would help a lot in cost cutting and time-saving.
A defect chart is provided to understand these defects.

Features :

• Different sizes polariscope available
• Customization available
• The devices gives you 2 slots for different light orientation; one is for 90° and other is for 45°
• The weight and sizes of the device are according to models
• The devices requires the standard power supply i.e. 220/240V

The Base Clearance Gauge is specifically designed to measure the dome height in the bottom of PET/Glass containers. The Base Clearance Gauge comes complete with a high accuracy, digital readout with built-in port for serial communications. A see-through base ensures clear visibility as measurements are taken.
Used to measure the dome height in the bottom of the bottle

Features :

• Reliable and simple to use
• Thick Stainless Steel base
• Ideal for at-the-line measurements near the blow molder
• Optimum functionality
• Durable Finish
• Longer functional life
• Mitutoyo dial gauge with digital output is fitted for accurate results

Fill Height Gauge Works as Laboratory Tool that Improves Accuracy During Measurements Involving Container Fill Height and Volume. the Gauge Allows Operators to also Adjust Fill Level of Containers that Need to Be Evaluated to Standard Predetermined Level. the Adjustable Gauge Operations also Allow Operators to Set Depth of Pipette for Appropriate Level with Excess Fluid Drawn Off to End of Pipette.

Features :

• Used for Adjusting Water Level in Bottle to Predetermined Fill Heights
• Dual Scale Where Calibration is Possible in Millimeters and Inches
• Designed for all Size Bottles Perfect
• Gauge Can also Be Preset in Inches/millimeters Options Form Checking of Fill Height Levels On Production Line
• Can Be Used for Measuring Exact Fill Point of Bottle and Then Comparing the Values to Standard
• Saves Time and Improves Accuracy During Volume Measurements and Container Fill Heights

Applications :

• For Fill Height and Volume Measurements in -bottle Filling Industry

Specifications :

• Adjustable Gauges
• Allowing Setting Depth of Pipette
• Provision of Excess Fluid to Be Drawn Off At End of Pipette

Capitalizing on our vast industry experience, we offer a premium quality range of gas volume testers which is also known as carbonation tester. These testers are extensively used to measure several types of gas chambers, pet and glass bottles. Apart from this, these testers are also used to measure the amount of dissolved carbon dioxide in carbonated drinks. In any aerated drink making unit, these testers are essentially required. These testers are available in two primary form of glass bottles fitted with crown caps and PET bottles with plastic ROPP caps.

Torque Tester is used for Measuring Incremental / Removal torque of closures. Round / Square/ Rectangular /Oval Bottles / Jars can be held.
Adjustable posts effectively grip a broad range of container shapes and sizes. Flat and custom made jaws are available for unique profiles. A rugged aluminum and Stainless steel design and simple operation allow for use in laboratory and production environments.

Features :

• Automatic digital reading output
• Peak hold provision
• Digital Display
• Strong SS grips pins adjustable
• Internal Calibration

Item Content :

• Universal voltage AC adapter,
• Quick-start guide and user's guide
• Calibration Kit

The MB95’s halogen heating system distributes heat uniformly over the sample and speeds up the drying process — delivering fast and precise measurements. Designed for tool-free cleaning, the MB95’s components can be easily removed for quick and easy maintenance. Operating the MB95 is intuitive with the icon-driven menu navigation on the touchscreen display.

Standard Features:

• Increase Efficiency in your Lab with Fast Heating Halogen Technology
• The MB95’s precisely controlled halogen heating dries samples quickly and ensures uniform heating to yield fast, precise and repeatable results of 0.01% readability. Four drying profiles and five switch-off criteria help to perform customized sample tests.
• Define your Drying Parameters and Store Up to 20 Methods for Easy Recall
• MB95 can help you store up to 20 methods and 200 total results, for statistical analysis of measurements.
• Effortless Maintenance with the Tool-Free Cleaning Design
• Designed with effortless maintenance in mind, the MB95 features a removable pan handler and heating chamber components that make cleaning quick and easy—no tools needed.
• Touchscreen Icon-Based Menu Navigation Guides Users through Every Step Icon-based menu navigation on the easy-to-read touchscreen display makes operating the MB95 intuitive. Perform routine sample testing in three easy steps—no training required.

The Bharat Group is Polariscope Manufacturer in India guarantees precise and accurate testing. A polariscope is a device that uses polarized light to visualize and analyze the stress distribution in transparent materials like PET Preform and Glass. The device consists of a light source, a polarizer, and an analyzer, which are arranged in such a way that the light beam passes through the material under investigation. The material is then viewed through the analyzer, which reveals any stress patterns within it.
Ensure the quality and clarity of your glass or preform products with our Polariscope. The use of our polariscope  is widespread in materials science and laboratories, where it is used to analyze the properties of materials such as glass, plastics, PET preform etc. For example, it can be used to identify stress points in glass objects such as windshields or bottles, to determine the quality of a plastic injection mould, or to analyze the structural integrity of Transparent Plastic components like PET Preform.
‘TBG’ Polariscope is used to view the internal material stresses and material flow characteristics of PET preforms and containers. This is ideal for laboratory use and at-the-line preform and bottle inspection
Defects in preform can be easily detected by using this equipment. When a preform is held parallel to viewing field colour pattern is seen known as isochromatic fringe. This indicates magnitude of the stresses introduced during moulding process. When a preform is held 45 deg to viewing field a coloured pattern known as isoclinic is seen, this indicates direction of stresses.
‘TBG’ Polariscope is used in the preform assembly to check the possible defect in the preforms. Take the precautions at the early stage would help a lot in cost cutting and time-saving.
A defect chart is provided to understand these defects.

Features :

• Different sizes polariscope available
• Customization available
• The devices gives you 2 slots for different light orientation; one is for 90° and other is for 45°
• The weight and sizes of the device are according to models
• The devices requires the standard power supply i.e. 220/240V

Digital Height Gauge to check height of any products like Bottle, Preform etc.

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as foam, rubber, textiles, plastic, paper: or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.
Tensile Testing Machine provides a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials such as rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gearbox and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. The load directly indicated in kilograms or Newton.
The elongation of the test specimen is measured on a digital indicator fixed on the frame of the tester, which indicates the distance between the grips. The frame of the tester fabricated from heavy mild steel sections to give the required rigidity and strength. Various built in safety arrangements such as over travel protection are provided.
The tester is finished in metallic painting and bright chrome zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied which electrical. Which include micro-, switches, Push buttons, and contactors for safe and convenient operation.