Tensile Testing Machine in Thane

• Diisplacement resolution (mm) : 0.2
• Max. capacity(Kg) : 2000,3000

Selection of different speeds by pulley belt system Facility to mount different load cells. Facility to mount various grips fixtures for different tests and materials like rubber, plastics, cables, leather, paper, plywood and metals more...

• Maximum Capacity (KN) : 100,400

Shanta Universal Testing machine is designed for testing Metals and other materials underTension , Compression, Bending, Transverse and Shear loads. Brinell Hardness Test on metals can also be conducted in smaller capacity UTM's. All Shanta Universal Testing Machines are closely controlled for sensitivity, ac more...

• Size (w x d x h) in mm : 300 x 430 x 1100
• Load Resolution in Kg : 0.03,0.05

Hand Operated Tensile Testing System, the two column frame with a hand wheel operated lead screw is a perfect tool for tension, compression and flexural testing of springs, rubber, paper, film etc., with apt attachments. These are appreciated for their durability, accuracy of results and high tensile strength more...

• Port Size : Φ6mm PU Tubing
• Accuracy : 1% FS
• Test Speed : 1 ~ 500mm/min (Stepless Speed Change) Note3
• Number of Specimens : 1
• Stroke : 800 mm
• Net Weight : 150 kg
• Power Supply : 220VAC 50Hz / 120VAC 60Hz
• Instrument Dimension : 850 mm (L) x 700 mm (W) x 1630 mm (H)
• Test Force Range : 50N, 100N, 250N, 500N, 1KN, 2KN, 5KN, 10KN (Customization Available)
• Gas Supply Pressure : <0.8MPa (Outside of Supply Scope)

i-Strentek 1510 Universal Testing Machine is professionally designed for the determination of mechanical properties including tensile strength, peel strength, tear strength, heat seal strength, adhesiveness and bending performance of plastic films, composite films, flexible packaging materials, adhesive tapes more...

• Sampling rate : 7,000 Hz
• Minimum sample length : 6.5 in [165 mm], excluding termination
• Maximum sample elongation : 1.15 in [29.2 mm]
• Accuracy : ±0.2% of full scale
• Outputs : USB / RS-232
• Backlight off : up to 24 hours of continuous use
• Wire gauge range* : AWG30 - AWG3*
• Power : AC or rechargeable battery. Multi-step low battery indicator is displayed,
• Capacity x Resolution : 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN
• Safe overload : 150% of full scale (display shows "OVER" at 110% and above)

The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1, 000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 more...

• Condition : New
• Power : 100
• Certification : Other
• Automatic Grade : Automatic, Fully Automatic, Semi Automatic
• Power Source : Electric
• Frequency : 66Hz
• Puncture Voltage : 440V
• Temperature Capacity : High Temperature, Low Temperature, Medium Temperature
• Color : white
• Brand Name : Labthink

TT2100 Series Tensile Testers can show realtime force and elongation on a computer monitor as the force and elongation values change. The TT2100 series was designed to determine tensile strength and elongation for most materials and components. These testers offer accurate and reliable test results for produc more...

• MOQ : 1 Piece
• Finishing : Powder Coated
• Usage/Application : Industrial
• Model Name/Number : EM-00212
• Operating Power : 230 V
• Brand Name : EQVIMECH
• Capacity : 200 KN
• Supply Type : Supplier
• Depth : 500mm

more...

• Model Name/Number : EM/03/01/2020
• Supply Type : Supplier
• Application : Laboratory
• Brand Name : Eqvimech
• Weight : 450 KG
• Country of Origin : Made in India
• Frequency : 50hz
• Automatic Grade : Automatic
• Phase : 1 PH
• Power : 230 V

more...

• Operating Mode : Automatic
• Phase : 1 Phase
• Material : Mild steel
• Supply Type : Supplier
• Tensile Strength : 10 KN
• Frequency : 50 HZ
• Finishing : POWDER COATED
• Capacity : 300 kg
• Application : Laboratory
• Country of Origin : Made in India

more...

• MOQ : 1 Barrel(s)
• Material : PVC
• Thickness : 20-30mm
• Surface Treatment : Polished
• Power : 2.2
• Length : 1-1000mm
• Voltage : 220V
• Screw Design : YES
• Brand Name : LINUX
• Pressure : Medium Pressure

more...

• Application : Testing
• Brand Name : LINUX
• Country of Origin : India
• Type : Universal Testing Machine
• Certification : Iso 9001:2008

micro pc model with twin load cell more...

• Capacity : 0.5-50 kN
• Country of Origin : United Kingdom
• Brand Name : Mecmesin

Our MultiTest-i series of universal testers are rated from 500 N to 50 kN, in single and twin column models. Grips and fixtures are available for holding any test specimen, and if a custom grip or fixture is required, Mecmesin has the engineering expertise to design and make to requirement on our pr more...

Our team members are well aware about the payment procedures and they ensure that the clients are completely satisfied with the transactions made. We accept payment through all offline and online mediums. Buy from us the extensive array of Tensile Testing Machine; we are counted amidst the leading Suppliers i more...

• Horizontal day light : 12 inch.
• Capacity : 5 tonnes*.

to cut samples having thickness up to 4mm.  Specification : Operation : Manual. Cross travel : 4 inch. Paint : Powder coated. more...

• Speed : Variables from 10 to 500 mm/minute
• Machine Capacity : up to 500 Kg. of load.

Tensile and Elongation as per ASTM – D638 and ASTM – D882 Direct display of results and printout through microcontroller such as Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation more...

Direct display of results and printout through microcontroller such as Peak load, Break load, Elongation at peak load, Elongation at break load, Tensile strength at peak load, Tensile strength at break load, % elongation at peak load, % elongation at break load could be viewed on the micro controller and prin more...

• Supply Type : Manufacturer

We are leading Tensile Machine - Computerised, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   As per as per ASTM D - 638 / ASTM D – 882   Model: AE-TT-C-1LC-500 Reference Standards: ASTM, ISO, IS   Specifications : → Load Capacity: 500 Kg with 10 gram resolution ( more...

• Supply Type : Manufacturer

Tensile and Elongation as per ASTM – D638/ASTM – D882/ISO 527 Flexural as per ASTM – D790/ ISO 178 Compression as per ASTM – D695   Reference Standards: ASTM, ISO, IS Model: AE-UTM-1LC-FC   Specifications : → System Status: Computerized + Digital → Data Entry: All Data through software or From C more...

• Supply Type : Manufacturer

We are leading Universal Testing Machine, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India. Tensile and Elongation as per ASTM – D638/ASTM – D882/ISO 527 Flexural as per ASTM – D790/ ISO 178 Compression as per ASTM – D695   Reference Standards: ASTM, ISO, IS Model: A more...

• Maximum Daylight : 600 mm From top of bottom plate to bottom of platen
• Dynamic rating : 210 Bar supply allowing Dp 70 Bar across the servo valve
• Column Spacing : Max. upto 500 mm or to suit applicatiion
• Load Cell : Suitable range Fatigue type
• Load Accuracy : +/- 0.5% of Reading.
• Actuator : Hydraulic with Servo valve and Servo Cylinder Double Acting Type
• Servo Valve : As per requirement
• Load Resolution : At least 1 in 10000 parts
• Standard column length : 1000 mm (Different column lengths available on request.)
• Length measurement : Linear sensor for actuator travel.

The Kalpak Computerized Servo Hydraulic Universal testing Machine offers ideal solution for dynamic testing of materials and components over a range upto 50 Hz The system is free standing type hence does not require a special foundation. The system consists of a sturdy load frame, with integrally mounted actu more...

• Clearance for compression test : 0-900 mm
• Machine Capacity : 100 KN to 400 KN in different models
• Power Supply : 440 Vac, 50 Hz, 15 HP
• Length Resolution : For Cross head travel 0.01 mm
• Ram Stroke : 200 mm
• Clearance forTension test : 50-200 mm
• Size : 2000(H) x 900 (W) X 800(D) mm nominal, with Base Frame
• PC Configuration : Supplied with machine. Intel Dual Core 2.8 GHz, with 52X CD-R/RW, , 2 GB RAM, 500GB HDD. Mouse, Keyboard, 2 USB ports,
• Weight : Net Weight – 1050 Kg,
• Operating /Test Modes : Rapid approach & slow Loading , User programmed Load Ramp KN/sec or Mpa/sec, displacement control um/sec

  Parameter Computerized 1500 KN capacity Compression Testing machine KICTM-200-C with Tensile Testing facility with capacity 40 T To carry out compression & tension Test including 0.2% proof stress & UTS     Control Mechanism Computerized Controller based with dedicated software for co more...

• Mode of Testing : Motorised
• Safety : Emergency Stop, Over Travel Protection, Over Load protection with alarm.
• Speed Accuracy : Better than 0.5%
• Torque Accuracy : +/- 0.5% of FS
• Motor : A.C.Servo Motor
• Angle Measurement : Continuous Measurement Facility with Resolution of 0.01 Deg, Max upto 99.99 Degs.
• Applications : Torsion and Twist Tests
• Capacity : 100 NM, 250 NM, 500 NM, 1000 NM
• L.C. on Angle : 0.01 Deg
• Load Measurement Units : Unit selection in PC software for Load measurement in Lbs in, NM, KgM,

  Software   Windows based software TTM-TEST-C capable of Controlling , recording Torque, Angle rotation, Spring Rates, and Presentation of test data in Tabular and Graphical Format.       more...

• MOQ : 1 Piece
• Brand Name : Aditya Instruments
• Weight : 3.5 Ton
• Voltage : 440V
• Automatic Grade : Automatic
• Application : Testing
• Power : 10-15kw
• Features : Accurate Measurement
• Type : Universal Testing Machine
• Color : Blue & White

We, Aditya Instruments are one of the prominent universal testing machine suppliers. Our testing machine is designed for testing metals and other materials under tension, compression bending, crosswise and shear loads. Hardness tests on metals can also be accompanied. Our testing machine is designed to perfor more...

• Ram Stroke : 300mm
• Weight ( Approx ) : 22000 Kg
• Color : Green
• Driven Type : Mechanical
• Brand Name : Aditya Instruments
• Dimensions : 3500x1900x4550 mm
• Automatic Grade : Automatic
• Finish : Paint Coated
• Maximum Capacity : 300kN
• Country of Origin : India

more...

• Warranty : 1 Year
• Power Supply : AC220V 50HZ
• Application : Testing, Metal Material, Plastic
• Color : Blue & White
• Automatic Grade : Automatic
• Country of Origin : India
• Brand Name : Aditya Instruments
• Voltage : 220V
• Type : Universal Testing Machine
• Weight : 5-10 Ton

We Aditya Instruments, are one of the leading computerized Universal Testing Machine Manufacturers. We owe the operations and devoted support of our team to help us in delivering an exact range of test equipment and machines as per the developing industry requirements. Our certified quality control procedures more...

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Color : BLUE
• Brand Name : PAP-TECH
• Clamps : 15mm or 25 mm.
• Condition : New
• Country of Origin : India
• Driven Type : Electric, Mechanical
• Voltage : 220V
• Power Supply : 1 Phase

Description: Vertical Tensile Strength Tester With Digital display of Tensile Strength & Stretch of Paper, Paperboard and similar materials complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. With imported load cell & importe more...

• Resolutions : 0.025% of nominal load cell range and 0.1 mm in elongation measurement.
• Data &amp; Interface : Data Saving Facility & Computer Interface & auto Calculations.
• Power Supply : 1Phase, 220Volt, And AC.,ELECTRIC
• Brand Name : PAP-TECH
• Clamping Length : Selected (50-100mm) adjustable selected by Micro and Set at fixed Speed.
• Automation Grade : Automatic
• Application : Strength Testing
• Color : BLUE
• Condition : New
• Supply Type : Manufacturer

The Microprocessor Based Vertical Dry & Wet Tensile Strength Tester  is  used  for  determining  the  tensile  strength,   stretch(Elongation)  &Tensile  Strength  Properties  of  Paper  &  Paperboard  sheet  mate more...

• Supply Type : Manufacturer
• Application : Strength Testing
• Automation Grade : Automatic
• Model No : PAP-2065-B
• Clamps : 15mm or 25mm
• Color : Grey, Light White
• Power : 1-3kw
• Measuring Range : Stretch at break 0-70% at clamping length 100 mm.
• Power Supply : 1 Phase
• Condition : New

Description: The Microprocessor Based Horizontal Tensile Strength Tester is used for determining the tensile strength and stretch of sheet materials.   Horizontal Tensile Strength Tester - User friendly software guides the operators through all steps of program selection, parameter modification and sampl more...

• MOQ : 1 Unit
• Brand Name : Tej
• Supply Type : Manufacturer
• Operating Mode : Automatic
• Capacity : 5000 Kn
• Country of Origin : India
• Application : Laboratory

more...

• Display Type : Digital
• Material : Mild Steel
• Capacity : 5000 Kn
• Application : Laboratory
• Country of Origin : India
• Operating Mode : Automatic
• Supply Type : Manufacturer

more...

• Power Source : AC
• Operating Mode : Automatic
• Phase : 3-Phase
• Application : Laboratory
• Material : Mild Steel
• Brand Name : Tej
• Country of Origin : India
• Supply Type : Manufacturer

more...

• MOQ : 1 piece
• Brand Name : Advancetech

Tensile strength, the maximum tensile force developed in a test specimen before rupture on a tensile test carried to rupture under prescribed conditions. Tensile strength (as used here) is the force per unit  width of test speciman. Stretch, the maximum tensile strain developed in the test specimen befor more...

• Brand Name : Advancetech

The machine in designed for determining the tensile  strength of  sheet  material such as paper, paper board,   plastics, metal foil, etc. The testing is made by inserting a sample between  two vertical  grips, and increasing the load until the sample  breaks. The elongation more...

• Brand Name : Advancetech

 Tensile Strength, the maximum force developed a test specimen before rupture on the tensile test carried to rupture under prescribed conditions. Tensile Strength (as used here) is the force per unit width of test specimen. Stretch, the maximum tensile strain developed in the test specimen before ruptrur more...