Sight glass are of full view type (glass length 150mm and 200mm)and double window type. APPLICABLE STANDARDS FACE TO FACE – ANSI B 16.10 MFG. STD – BS 5351 TESTING STANDARDS -API 598more...
: : CI/ASTMA216GrWCB/ASTMA351CF8/ASTMA351CF8M MS/CS/SS304/SS304L/SS316/ L and PP/HDPE/PVDF/PFA/PTFELined
Connection : :
Up to 200°C depending upon the type : Design Pressure
Up to 400 NB depending upon the type : Material of wetted parts
Design Temperature : :
Line Size : :
Double Window Type Sight Glass (Sight Flow Indicator) in Cast Construction & Fabricated design to meet an industrial requirement of various applications to Window type sight flow indicators can be supplied with flapper or transparent/opaque liquid.inspect the process fluid. In Domore...
Pressure Max : Full View - 8 kg/cm 2 / Double Window 20 kg/cm 2
Temperature Max : Full View - 100º C / Double Window 200º C
MOC : SS 304, SS 316, SS 316L, P.P., PTFE
Glass : Heavy Duty / Toughened
Connection : Flange Type
Length Max. : 250 mm Or as per Requirement
Full View Type for LOW Pressure & Temperature (Model No. L-23) Double Window Type for HIGH Pressure & Temperature (Model No. L-24) Applications : Vertical full pipe flow Gravity & very low flow Standard specifications : Toughened Glass, Window, Compressed asbestos gaskets, Fmore...
Pressure Toppings : : For 1" to 16" - Flange Taps / Corner Taps. Above 16" - D x D/2
Orifice plate is the heart of the Orifice Meter. It restricts the flow and develops the Differential Pressure which is proportional to the square of the flow rate. The flow measuring accuracy entirely depends upon the quality of Orifice plate, its installation and maintains.more...
CAST STAINLESS STEEL : : ASTM A 351 Gr CF-8 / CF-8M
CAST CARBON STEEL : : ASTM A 216 WCB
Flanged Ends : : ANSI B 16.5 ASA 150#
FABRICATED CS : : MS IS 2062
FABRICATED SS : : SS 304 / SS 316
Screwed Ends (BSP, NPT) : : ANSI B 1.20.1 { ½” (15 mm) to 2” (50 mm)}
View glasses or Sight glasses are used to monitor the in line flow in the process lines. They are Bi directional, reliable, economical & available with Standard 150 mm long Tube. They can also be fabricated in required length. “IVE” Manufactures QVF (Quick Visual Flow) type Smore...
Sizes for Flange Design : 25, 40, 50, 65, 80, 100, 150, 200, 250 MM
Sizes for Integral Design : 15, 20, 25, 40 MM
It is differential pressure type of flow meter, exactly reverse of rotameter. It is the most widely applied flow rate measuring device for fluid flows in pipes that require accurate measurement. Differential pressure flow meters have a change in flow cross section that can be desmore...
Hammer Unions. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. Three lug nuts and self-locking ACME threads provide quick make-up and break-out.Meet or exceed National Association of Corrosion Engineers Standard NACE MR-01-75 more...
Backup Rings prevent extrusion of O Rings In high pressures usually above 1500 PSI & compensate for loose fitting components.If only one backup ring is used, the O Ring should be placed between the pressure source & the backup ring.One backup ring should be used on each side of tmore...
The orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or vapours.When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between thmore...
Scientific Devices offers a complete range of Orifice plates for a variety of flow conditions for mounting between flanges for Carrier Rings and with RJ Plate Holders for mounting between RJ Flanges. Scientific Devices Orifice Flange Assemblies are made to AGA/ASME recommenmore...
A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, spinner is often incorporated in the flow stream so that fluid impinging on the spinner vanes cause it to turn. more...
Consists of aluminium tapered nose with replaceble nylon brush used to guide tubes through tube & support plate holes. Speeds up the assembly operation & prevents tube end damage during assembly. The nylon brush fits in the tube end holding pilot firmly in place more...
FEATURES: Tube Guide is used for piloting tubes through the tube sheet & baffle plates during tube insertion process. Tube guides size range is ½ to 1.1/2. For larger size, please contact us. more...
Backup Rings prevent extrusion of O Rings In high pressures usually above 1500 PSI & compensate for loose fitting components. If only one backup ring is used, the O Ring should be placed between the pressure source & the backup ring. One backup ring should be used on each side ofmore...
We manufactures and supplies a wide range of Plastic Thread Protectors for Tubings. The standard sizes available are as follows, however we can manufacture protectors based on your special requirements. more...
Pressed Steel Thread Protectors are designed to protect the API drill pipes, drill collars connection and tubings made as per API 5D-7 and 5CT respectively. UD Instruments Pressed Steel Thread Protectors are designed & manufactured to protect the API Drill pipes, Drill Collars comore...
Keeping track with latest market trend, we are actively engaged in offering wide assortment of Drill & Tap Sleeve . The offered product is fabricated with the help of superior quality material and advanced tools in compliance with set industrial standards. It is thoroughly testmore...
Sight Glass We are a reliable name engaged in manufacturing a qualitative range of toughened round glass & sight glasses. Our high safety level glass is secured by thermal pre-stressing (tempering) which creates high resistance to sudden thermal shocks. Its characteristic valumore...
Strainer Cum Air Eliminator: Our company specializes in offering best quality range of Strainer Cum Air Eliminator (Offset & Line ) to our prestigious clients. The provided eliminator is manufactured by our skilled professionals using the best grade raw material and modern temore...
We are offering pipe line equipment. we are engaged in providing pipe line equipment to the customers. Our pipe line equipment has long functional life. We use high grade material for the manufacturing of our pipe line equipment. Our pipe line equipment is provided in different smore...
NK Instruments Pvt. Ltd. manufacture various types of Condensate pots in MS and SS material. Condensate Pots are used when Process Temperature is more than the highest temperature limit of the Pressure Instrument to be used in process. more...