Usage/Application : Thermoforming, Packaging, Outdoor Heating and Saunas in Leisure Centers
Supply Type : Manufacturer
Packaging Type : Carton Box
Shortwave based infrared heaters are used in industry processes where the need for rapid heat generating systems is prominent. As the name suggests, these heaters operate on infrared waves that are known to generate large amount of heat in a shorter duration of time. The heat is more...
We are counted amid the quality-centric organizations and thus source the inputs only from the trustworthy sources. Also, these raw materials are checked against varied quality parameters. Want to obtain Hot Water Generator at market's lowest prices? Deal with us. We are famous smore...
This mantle is designed with a cold rolling sheet and adjustable sensor rack with spraying exterior surface. The offered mantle is available with us in 250ml, 500ml, 2000ml, 5000ml, 20000ml and other capacities that are designed to handle temperature of 380oC to 450oC. Body of thmore...
Color : Blue / Red / any other color as per customer requirement
Application : Industrial Use
Warranty : 12/18/24
GM Induction Heater Model GM 10M [6.0-8.5 KVA] unit with SWING ARM ARRANGEMENT 440V. 50Hz with Intelligent Micro Controller based electronics controls , suitable to heat the Jobs for mounting of the bearings id from 20 mm to 550 mm & weight upto 130 Kgs along with accessorimore...
Induction Heaters are designed to heat the Bearings and other shrink-fit components prior to mounting, using latest technology intelligent microcontroller based electronic controls. The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaftmore...
High density cartridge heaters, Anupam's Cartridge heaters can be considered "component heaters" that are used to heat up many different applications. Primarily used in mould, these heaters fit snug inside a cavity and helps heat solids by reaching high temperatures. Cartridge hemore...
Feature : High heat transfer rates and fast heat up,Large selection of lengths, sizes and terminations,Distributed wattage available
Anupam's Finned Strip Heaters are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). Fins increase the heat transfer surface area to allow higher wattages than standard Strip Heaters. These are intended to bemore...
Gold plating is done on quartz tube over 180°. These heaters reflect the radiant energy through the opening area only, improving element efficiency by as much as 20% compare to without gold plating heater. Energy cost savings are realized. Reflectors are often not needed. Surroumore...
We have uncompromised quality rules when it comes to packaging. We make sure the products are properly packed for shipping handling, as well as they have smudge-proof labels. We have an extensive supply-chain system that empowers us to ensure a distribution of consignments is donmore...
Basically this type of heater is applied in plastic injection moulding machines of various makes.It is also used for heating dies, plattern pipe sections, nozzles etc.Sheathing - rust resistant steel, brass or stainless steel are used with clamps & screws to affix the heater rigimore...
Microtubular coiled heaters are manufactured to a revolutionary design, which makes them the best choice in the most demanding conditions. The resistive wire is uniformly distributed in a compacted MgO insulation, with a CrNi-steel outer protection sheath. The heaters are annealemore...
Mica insulated Heaters consist of electric resistant ribbon round wire element covered with zinc plated MS, Brass or SS sheet with clamps. Size 8 terminal connections as per requirement.Low cost electric heating of plastic processing, rubber vulcanizing, Drums, Barrels & cylindermore...
FEATURES : Saving Energy Up to 30%, Reduce Wattage of Heater, More Uniform Heating, Less Down time increases Productivity, Reduced Preheating time of Machine, Heater cost is recover in shorter time
Elstein IRS rod heaters are ceramic infrared heaters, designed for operating temperatures of up to 750 °C. With the help of MPO and MPO/2 mounting profiles, surface ratings of up to 72.0 kW/ m² can be realised. IRS series heaters have one mounting socket on each side, wimore...
HS FS ring elements owing to their convenient shape & sizes, adapt themselves readily to variety of machines and appliances for which other type of heaters are not suitable. They are being fitted for heating platens, dies of presses. They are in use for melting of glue, wax, easimore...
Flanged immersion heaters are one of the most widely used methods for heat-ing gases and liquids (such as water, oil, heat transfer fluid and corrosive solutions). Designed for use in tanks and pressurized vessels, they are easy to install and maintain to provide heat for many prmore...
Sheathing–This type of heaters have quartz silica tube sheathing, closed from bottom. Rubber cap with terminal wires are mounted on the top. Heater terminals are fixed very firmly with the outer wires. It consist of non-sinkable heating element, as the heater is suitable for vemore...
We are offering gas fired hot water generator, oil fired hot water generator etc. hot water generator oilgas fired fully automatic coil type pressurized & non pressurized design. capacity - 50, 000 kcal & up to 10 lac kcal.hr.more...
These easy-to-maintain baths feature a broad range of bath sizes and models, with digital set-it-and-forget-it control, faster heat-up to time and easy calibration. Easy-to-maintain, seamless stainless-steel interior chamber and epoxy powder coated exterior resist corrosion and cmore...
Tubular elements used for heating liquids (corrosive and non-corrosive) are known as immersion heaters. For corrosive medium, sheath of the element can be enclosed in metallic or non-metalic Element casing made of special alloy can be used for longerlife of the element.Available more...
Our Twin Tube MW IR Heater is made up of 8-shape high-purity clear quartz twin tube, with each tube having Ni-Chrome heating coil that runs in U Shape in the tube. The outer rear side of the tube of the reflector has the gold coating.more...
Features : As the coil is embedded in ceramic material, it can be installed in any possible position.
This is a special type of infrared heater with color-changing feature. Along with a change is temperature the heater changes its color. This is helpful to the users in a sense that there is a visible indication of the level of temperature reached at any given point of time.Where more...
Our Ceramic Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against much damage. We supply Custom Wattage Ceramic more...
Self - contained heating units designed for optimum operating efficiency and erformance. Providing trouble free service and application flexibility! All of the heat generated by the elements is immediately transferred to the medium being processed with minimal. more...
We offer a comprehensive range of Industrial Heat Equipment, which is extensively used for various industrial applications. These heating equipment are acknowledged for high conductivity and durability. Manufactured using high grade raw material that is procured from most reliablmore...
manufacturing facilities have enforced us to bring forth qualitative range of thermic fluid heaters. We use cutting edge technology and quality approved raw materials for the fabrication of thermal oil thermic fluid heaters. Our collection of coil type thermic fluid heaters is fimore...
The organization is involved in catering to the market with its qualitative array of Industrial Radiators. Ours is a well-recognized firm based in Thane(India) and appreciated for offering qualitative products and that too at the best market prices.more...
Design & Safety Heater Transfer Coil Made Out Of Seamless Pipe Sch-40 Low Flow Alarm & Safety Minimum Delta T Across The Heating Coil Robust Design Offers Trouble Free Working Smokeless Combustion Noise Free Working Quality Our thermic fluid heater and steam boiler has bemore...
High watt density split sheathed cartridge heaters uses less power, runs more efficiently and survives more that of cylindrical type conventional cartridge heaters. Due tornits elongation capability it clutches the mould when energized leaving no air gap and contractsrnwhen it comore...
Contact us, if you are looking for Short Wave Infrared Heaters. Our company holds expertise in exporting and supplying of ELSTEIN Germany Ceramic infrared Heater . In compliance with set industrial standards and norms, Infrared Heater is fabricated, which we procure from remore...
We would like to introduce ourselves as a leading supplier for Short Wave Infrared Lamps. These IR Lamps are available in different sizes and specifications as per the catalogue enclosed. The same can be supplied along with the module i.e with the mounting assembly if required .Imore...