Impact Testers in Thane

• Paint : Powder coated
• Supply Type : Manufacturer

Darts : 2 no’s supplied with equipment. Dart Falling Heights : 220, 660 & 1524 in mm. Weight Box : 5 to 500 grams incremental loads. Dart HoldRelease System : Electromagnet with “0”, Noise + “0” Vibration. Start Command : Paddle Switch. Vacuum System : In built + Noise less. Vacuum Range : 760 mm of more...

• Supply Type : Manufacturer

We are leading Seat Impact Tester, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   To check the impact effect on the seat surface of the plastic molded chairs. → A pneumatic cylinder of 400mm stroke and diameter of      40 mm. → Electrically operated solenoid val more...

• Supply Type : Manufacturer

We are leading Izod Impact Tester/Charpy Impact Tester – Computerised, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   As per ASTM D256, ASTM D6110, ISO 179 & ISO 180 Model: AE-ICT-FC Reference Standards: ASTM, ISO, IS   Specifications : → Material of Construction: more...

• Supply : 230 VAC ± 10 VAC/ 50 Hz.
• Machine Capacity : Up to 25.00Joules

As Per IS-15801, ISO9854-1: 1994, ISO9854-2: 1994 Impact Energy: 15J, 25J Resolution: 0.001J Velocity of striking: 3.8 m/s Results visible on controller display Graphic display and results through PC software. (Optional) Report consists of as per ASTM, ISO & IS. Results on direct display in J/m; Kgcm/cm; J/m� more...

As per ASTM – D1709 and IS 2508. To test the impact resistance of the film by free falling darts. 2 no’s of darts supplied Set of 5 to 500 grams weights supplied for incremental loads. Electromagnetic darts holding/release system. Digital counter to counts the trials. Vacuum indicator to check the vacuum. more...

• Ranges : 0-2.71 J 0-5.42 J 0-10.84 J 0-21.68 J

The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing. The energy absorbed per unit of specimen width is repor more...

The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing. The energy absorbed per unit of specimen width is repor more...

• Specifications : FIT-01 Pendulum Impact Tester
• Specimen Size : 100 mm x 100 mm or ?100 mm
• Gas Supply Pressure : 0.6 MPa (outside of supply scope)
• Resolution : 0.001 J
• Instrument Dimension : 600 mm (L) x 390 mm (W) x 600 mm (H)
• Power Supply : 220VAC 50Hz / 120VAC 60Hz
• Net Weight : 64 kg
• Specimen Clamp Diameter : ?89 mm, ?60 mm
• Impact Energy : 1 J, 2 J, 3 J (Standard)
• Impact Head Size : ?25.4 mm, ?19 mm, ?12.7 mm (Customization is available)

FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420. FIT-01 Film Pendulum Impact Tester is professionally applicable to the determination of  impact resistance properties of pendul more...

BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.   Principle Before starting the test, choose test method, and es more...

For impact resistance testing of plastic film, sheet, and laminated materials, a specific weight is dropped from a specific height onto a firmly held sample to determine a 50% failure rate. Technical Specifications : Additional Weights     2000 g Testing Parameter      Impact resistance of plastic film more...

• MOQ : 1 Piece
• Minimum Scale Graduation : 0.1J
• Display Type : Analogue
• Model No. : AI-IT 1.5
• Net Weight : 70 Kg
• Material : Cast Iron
• Country of Origin : India
• Overall Size (Approx.) : 0.5m x 0.3m x 0.52 m (H)
• Brand Name : Aditya Instruments
• Automation Grade : Manual

more...

• Automation Grade : Automatic
• Condition : New
• Application : Industrial Use
• Warranty : 1year
• Voltage : 110V, 380V
• Weight : 100-200kg, 300-400kg
• Brand Name : Aditya Instruments
• Power : 1-3kw, 6-9kw
• Driven Type : Electric

Our company Aditya Instruments can introduce itself as a quality-driven leading organization in manufacturing ductile tester and electronic universal testing machines in India. We have earned reliability from numerous reputed industrial organizations in India and are usually specialized in the manufacturing o more...

• Driven Type : Mechanical
• Automatic Grade : Automatic
• Condition : New
• Warranty : 1year
• Brand Name : Aditya Instruments
• Voltage : 110V, 380V
• Power : 1-3kw, 6-9kw

more...

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Usage : stripping value apparatus
• Length : 0-10cm
• Country of Origin : India
• Feature : Fine Finished, Optimum Strength, Washable
• Brand Name : SECON
• Finishing : Polished
• Shape : Round
• Color : Silver

A circular tray rotates in a vertical plane at a rate of approximately 100 r.p.m. by an electrical geared motor . 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 90 degrees to each other with their mouth towards centre of the tray. A time switch is provided. more...

• Application : Industrial Use
• Automation Grade : Automatic
• Power : 1-3kw
• Supply Type : Manufacturer
• Driven Type : Electric
• Voltage : 220V

more...

• Pattern : Plain
• Finishing : Polished
• Thickness : 0-10mm
• Color : Blue
• Supply Type : Manufacturer
• Country of Origin : India

more...

• Condition : New
• Power : 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Automatic Grade : Automatic
• Voltage : 110V, 220V, 380V, 440V
• Application : Industrial Use
• Weight : 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Warranty : 5years
• Driven Type : Electric

We offer Pendulum Impact Testing Machine that is designed for conducting Izod, Impact Tension and Charpy test. Perfect for the testing purposes, our Pendulum Impact Testing Machine is commonly used in various industries. We are well reckoned as one of the prominent Pendulum Impact Test Equipment Manufacturers more...

In order to keep transparency in dealings, we offer our clients an invoice including the details of the products, quantities and price on which both the parties agreed for the payment. Moreover, our payment procedure is safe. With the aid of diligent team of professionals and modern packaging facility, we can more...

• Supply Type : Manufacturer
• Condition : New
• Color : Black
• Specialities : Rust Proof, Easy To Operate

Tubular Impact tester instrument allows both the failure point to be measured. It can be used with paints, Varnishes, plastic coating, laminations and sheet material. A sample clamp securely hold the test piece, Impact can be varied by adjusting weights or heights. more...

• Country of Origin : India
• Motor (To revert back the trolley) : 1 H.P.
• Lifting Through : Pneumatic Air Cylinder (to set angle)
• Slab Wall Make : MS Make
• Angle of Inclination (Adjustable) : 0 to 10º
• Testing Box Size : :60 × 60inch
• Controller System : Digital Controller
• Supply Type : Manufacturer
• Slab Wall (LxW) : 3 × 3.1 Mtr.
• Material : Stainless Steel

‘VG'  Inclined Impact Tester performs inclined impact tests which simulate distribution handling hazards. Our design meets traditional industry specifications with the added benefits of some innovative design ideas. The unique articulating carriage pivots to load the test item. With the top surface more...

• Capacity : Up to 25 J.
• Supply Type : Manufacturer
• Country of Origin : India
• Power : 230 Volts, 50Hz, single phase
• Release angle of pendulum : 135 degree.
• Resolution : 0.1 J
• Related Standard : Astm D – 256

As per ASTM D - 256 to test impact resistance of plastics. The test indicates the energy required to break standard test specimen. more...

• MOQ : 1 Piece
• Driven Type : Electric
• Brand Name : MSI
• Material : Mild Steel
• Color : Light White
• Supply Type : Manufacturer
• Condition : New

For determining stripping value of bituminous mixes having aggregate size: 1.0mm to 75 micron. Specification: A circular tray rotates in a vertical plane at a rate of approximately 100 R.P.M. by an electrical geared motor. 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 900. more...

• Brand Name : MSI
• Power : manual
• Supply Type : Manufacturer

Standard Used : IS 2376 (PART-IV) & BS 812:111 For Measuring of Resistance of Aggregate to Crushing. Specification: The Aggregate Crushing Value (ACV) test set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylin more...

• Supply Type : Manufacturer
• Automation Grade : Manual

Standard Used : IS 2386 (PART IV) 9377 & BS 812:112 It is robustly designed to determine the aggregate impact value (AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact. The counter fitted to the machine automatically records the number of blows more...

• MOQ : 1 piece
• Usage : Industrial
• Automation Grade : Automatic
• Feature : Highly Durable
• Model Name/Number : RI 300 E
• Supply Type : Manufacturer
• Product Type : Impact Testing Machine

Since the inception of our firm, we are offering a quality assured array of  Digital Impact Testing Machine. Description: Electronic digital display Simple construction of pendulum izod so that izod or charpy machine, machine can build at sight Interchangeable stickers for izod & charpy positions Pos more...

• Automation Grade : Manual
• Material : Metal
• Model Name/Number : RI 300
• Supply Type : Manufacturer
• Brand Name : Ratnakar,Ratnakar

We are a trusted organization of this domain in offering a wide gamut of  Pendulum Impact Testing Machine  to our valued customers. This machine has the large rectangular dial with outer scale for Charpy test and inner scale for Izod. Also, in this, the pendulum is supported separately in two positi more...

• Usage : Industrial
• Supply Type : Manufacturer
• Brand Name : Ratnakar
• Product Type : Impact Testing Machine
• Model Name/Number : RI 300 ASTM
• Material : Metal
• Minimum Order Quantity : 1 Unit
• Capacity : 14 Jouls to 750 Joules

Owing to the knowledge of this domain, we are offering to our patrons a broad spectrum of  Charpy Impact Testing Machine. Features: Caliper gauge for checking V notch both for izod & Charpy as per BS: 131: Part, 1, 2 & 3 Template for checking 10x10 mm cross section of izod / Charpy test specimen more...

• MOQ : 1 Set(s)
• Weight : 200-500 KG
• Power : 1-3kw
• Supply Type : Manufacturer
• Voltage : 110V
• Driven Type : Electric
• Warranty : 1 Year
• Application : Industrial Use

We are manufacturing as well as supplying Impact Testing Machine in India. Our Impact Testing Machine is designed for conducting Izod & Charpy test. The test method conforms to BS: 131: part 4 1972 (Amended 15 Aug – 1993) & BSEN: 10045 – 2: 1993. Constriction and functions of Impact Testin more...

• Automation Grade : Automatic
• Application : Industrial Use
• Supply Type : Manufacturer
• Power : 1-3kw
• Weight : 200-500 KG
• Driven Type : Electric

Buyers can avail themselves of high-performance Digital Impact Testing Machine at best prices from us! We are one of the eminent Manufacturers and Suppliers of Digital Impact Testing Machine in Maharashtra. We fabricate these machines to perform Izod and Charpy tests. The methodologies adopted to conduct thes more...

• MOQ : 1 Piece
• Model : IT 30
• Net Weight (Approx.) : 375 kg.
• Overall size (Approx.) : 1.1m x 0.45m x 1.65m (H)
• Maximum Capacity : 300 J/168 J
• Max. Scale Graduation : 0.5 J

MODEL : IT ASTM The Impact Tester offered with 300 & 400 J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing stand more...

• Max. Scale Graduation : 0.5 J
• Overall size (Approx.) : 1.1m x 0.45m x 1.65m (H)
• Model : IT 30
• Maximum Capacity : 300 J/168 J
• Net Weight (Approx.) : 375 kg.

The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS:131:PART 4-1972   (Amended 15 Aug. 1993) BSEN:10045-2:1993. The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy the lower one for Izod more...

• Maximum Capacity : 300 J/170 J
• Max. Scale Graduation : 2 J
• Model : IT 30 (D)
• Overall size (Approx.) : 1.32m x 0.45m x 1.05 m (H)
• Net Weight (Approx.) : 375 kg.

The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS:131:PART 4-1972   (Amended 15 Aug. 1993) BSEN:10045-2:1993. The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy the lower one for Izod more...