Flow Sensors in Thane

• Rotor : Aluminum anodize/S.S-316/PPS
• Maximum working pressure : 10MPa
• Power voltage : 5 - 24V DC
• Accuracy (standard installation position) : +/- 0.5% ( Higher on request)
• Fluid &Ambient temperature : -40 to80 Deg
• O-ring : NBR/Viton
• Connection : Threaded M/F / Flange
• Shaft : Hard Stainless Steel-316
• Enclosure : Aluminum anodize/S.S-304/S.S-316

more...

• Enclosure : Aluminum anodize/S.S-304/S.S-316
• O-ring : NBR/Viton
• Fluid &Ambient temperature : -40 to80 Deg
• Power voltage : 5 - 24V DC
• Rotor : Aluminum anodize/S.S-316/PPS
• Maximum working pressure : 10MPa
• Accuracy (standard installation position) : +/- 0.5% ( Higher on request)
• Connection : Threaded M/F / Flange
• Shaft : Hard Stainless Steel-316

more...

• Power Supply : 4.5 to 24 V DC
• Max. Allowed Pressure & Temperature : 17.5 bar & 120 degree C
• Accuracy : 0.5 Up To 2% FSD
• Wetted Parts : POM or, PA66 + 30 GF
• Process Connections : 2/4 mm OD, 1/2
• Output : Pulses (Frequency)

We have 5 models in the same, depending up on the Flow Rates - 40 to 400 LPH 150 to 1500 LPH 500 to 5000 LPH 800 to 8000 LPH 1000 to 10000 LPH more...

• Input Voltage : 12 to 24 VDC
• Max. % of Solids : 1% of fluid volume, non-abrasive, non-magnetic,<100 micron in dia.& length.
• Output : High frequency pulse output (30 to 70 Hz), so can be directly connected to the PLC’s.
• Accuracy : +/- 1% of Full Scale if velocity is more than 0.5 m/s
• High frequency pulse output (30 to 70 Hz), so can be directly connected to the PLC’s. : It is compulsory with PP or, SS 316 Flow Sensors for the better performance of the Sensor

The Rotating Paddle type Flow Sensors are suitable for any clear liquids. There are five types of Sensors with us. PP Flow Sensor- Magnetic (suitable for 6 bar pressure and 60 degree C) SS Flow Sensor- Magnetic (suitable for 10 bar pressure and 100 degree C) SS Flow Sensor- Non-magnetic (suitable for 10 bar p more...

• MOQ : 10 Piece
• Brand Name : ACT
• Application : Medical
• Country of Origin : India
• Accuracy : 25-100%
• Flow Rate : 12 to 300 SLM
• Response Time : 5 ms
• Supply Type : Manufacturer
• Output : 5 VDC

AS40 features ACT’s third-generation thermal flow die, benefiting from the latest innovations in microfabrication. The sensor die uses a pair of thermopiles to detect changes in temperature gradient caused by mass flow, delivering excellentsignal-to-noise and repeatability. The &ldqu more...

• Supply Type : Manufacturer
• Country of Origin : India
• Brand Name : ACT
• Output : 5 VDC
• Response Time : 5 ms
• Supply Voltage : 10 VDC
• Application : Medical
• Flow Rate : 12 to 300 SLM

AS40 features ACT’s third-generation thermal flow die, benefiting from the latest innovations in microfabrication. The sensor die uses a pair of thermopiles to detect changes in temperature gradient caused by mass flow, delivering excellentsignal-to-noise and repeatability. The &ldqu more...

• Brand Name : ACT
• Current Type : Single Phase
• Voltage : 220 V
• Warranty : 1 Year
• Country of Origin : India
• Application : Industrial Use
• Supply Type : Manufacturer

The supported max flow rates range from 12 SLM to 300 SLM. The sensors are temperature compensated over the temperature range of 0 to 50 °C. The linearized output provides maximum flexibility and ease-of-use. more...

• Finishing : Polished
• Feature : Easy To Install, High Quality, Quality Approved
• Condition : New
• Application : Monitor Air Or Compatible Gas Flow.
• Supply Type : Supplier
• Type : Series AFG Averaging Flow Grid
• Packaging Type : Carton
• Color : Silver

series afg averaging flow grid cost effective air flow station for ducts up to 60" the series afg flow grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of more...

• Color : Blue
• Type : Series EFS2 Insertion Electromagnetic Flow Sensor
• Condition : New
• Supply Type : Supplier
• Warranty : 1year
• Brand Name : DWYER USA
• Power : 12 To 25 VDC @ 250 MA; (12 To 25 VDC @ 40 MA (max. 250 MA) - LOP Option).
• Material : Brass Or PVC
• Application : Compatible Clean Or Dirty Non-coating, Conductive Liquids.

Insertion Electromagnetic Flow Sensor Series EFS2 Insertion Electromagnetic Flow Sensor No Moving Parts, Durable, Easy Installation & Maintenance, 1 to 12" Pipe (25 to 305 mm) The SERIES EFS2 Insertion Electromagnetic Flow Sensor is designed for pipe sizes from 1 to 12" and comes in three different materials more...

• Type : Paddle Wheel Flow Sensor
• Power : 10 To 35 VDC.
• Supply Type : Supplier
• Condition : New
• Material : Brass Or 316 SS

Paddle Wheel Flow Sensor Series PFT Paddlewheel Flow Sensor Non-Magnetic Sensing, Adjustable for 1-1/2 to 40" (38.1 to 1016 mm) Pipe, Pulse or 4 to 20 mA The Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40" and is available in brass or 316 SS body. T more...