STANDARDS: ISO 105, BS 1006, AATCC 92 , 114, 117, 133

• Test the effect of dry heat on sublimation properties of dyestuff.
• Fixed temperature of 150C, 180C & 210C on each pad or variable by 30C of the fixed temperature setting.
• Number of heating station 3.
• Number of pads 6, 2 for each stations with individual heating.
• Size of each pad 40 mm to 100 mm.
• Timer range 10 to 60 second.

To Check the Shrinkage Percentage Directly

• To determine directly the % Dimensional Change (shrinkage) in all types of fabrics.
• Fine Calibrated Shrinkage Template with nine 14 Inches Benchmarks.
• Calibrated Scale to Check the Shrinkage directly from 0-15%
• Even the Stretch can be directly measured upto 15%
• Two fine tipped Yellow Fabric Markers for accurately marking on the Dark Colored Fabric.

Two fine tipped Black Fabric Markers for accurately marking on the Light Colored Fabric.

• To assess the nep content in card/drwing sliver.
• Based on traditional method of counting number of neps per 100 square inch.
• An assorted accessory makes the test simpler.

• This is the latest Instrument developed to evaluate the Snarling Tendency of High Twisted Yarns (Single & Double) before steaming and after steaming, Instrument helps standardizing steaming timings of High Twisted Yarns to that Snarling Tendency is minimum.
• Because of High twist yarn has the Snarling tendency which affect the further processes resulting in damages . To control this snarling effect, yarn is steamed and is processed further, Steaming of yarn reduce the snarling tendency. Standardization of steaming timing save the fuel cost and Good Economic saving is made. Spare hooks are also available at our end (Hook Weight)

(A) For Single Yarn. Cap.10/50kg. LCD & Computerised.

(B) For Lea. Cap.100/500kg. LCD & Computerised

(C) For Lea/Fabric & Single Yarn Cap.5kg to 500kg. Computerised in Single Machine

(D) For Fabric, Rubber, Metal, Strip, Plywood, Wire & Paper etc.etc.Cap.250kg/10T LCD & Computerised

Standards ISO, ASTM, BS, IS.

• Machine suitable for Fabric/Lea testing
• Single screw heavy duty frame structure balance load facility for smooth working and operation
• Machine is Floor mounted model with microprocessor based computer supported software system.
• Machine can work on both directions Tensions
• Machine is suitable for Fabric/Yarn lea application.(Strength & Elongation)
• Machine is fully digital model with accuracy.
• Speed selection is 300mm & 450mm speed A.C. Drive.
• Speed change settable with digital key Pad on A.c.Drive
• Extension resolution 0.01mm
• Extension accuracy. 1mm
• Extension measurement grip to grip.
• Force Measurement and detection via. Digital load cell. Accuracy 0.5% of applied force.
• Real Time Graph of Load vs. Extension is displayed during the test.(incase of computer interfacing)
• User can convert graph into Stress vs. strain at any instant.
• Easily Unit conversion facility also available after completion of the test.
• Easy storage and retrieval of test profiles.
• Manual cross head, up, down, stop control
• Input of test data formatting of test report via. computer software.

Note -Computer with printer is required at customer end. The same has to be arranged by you at your cost. Computer features having windows XP loaded software and Microsoft office 2003 loaded PC.

Load Cell 1 No

• Range: 250kgf.
• Least Count: 0.01kg and accuracy 10 gms at 250kgf
• Load cell is permanently fixed. No Need to change any fixture
• Window based test software supplied along with the machine.

Load Cell -1 No.

• Range: 500kgf.
• Least Count: 0.1kg and accuracy 10 Gms at 500 kgf.
• Load cell is permanently fixed. No Need to change any fixture.
• Window based test software supplied along with the machine.

• Machine confirms to IS-6489-1979, ASTM D-689-1979
• Elmendorf type Cap.0-1600, 0-3200 and 0-6400 grams.
• Supplied with augmenting weights and set of Brass Calibration weights complete.
• Complete unit with standard accessories.

Standards BS 5811, IWSTM 152, NEXT 19, M&S P18, P18A, P18B, P21A BS EN 12945-1

• With 2 Wooden boxes
• Internal size 9"x9"x9".
• Best Quality rubberized Cork Sheet of 3 mm thickness.
• Fixed speed of rotation of boxes is 60 RPM.
• Size of Test specimen is 125.5mm x 125mm ID x 150mm long.
• Size of Pilling Tubes: 32mm dial x26mm x 150mm long having Shore Hardness of 65 degree
• Equipped with H.P. Single Phase Geared Motor.
• Pre-settable Counter having 5 digits(99999) sensed by best quality Proximity Switch
• Supplied with Specimen mounting Jig, Specimen Cutting
• Template & 8 Nos. Pilling Tubes

Standards ISI2673-1989, IS-2634-1987, IS-3919-1987, IS-635801971 and ASTM D- 4966

• This precision built multi-purpose machine Rubs the material in Multi-direction for measuring resistance to surface.
• The path traces by Multi-motion is known as Lissaious Figure, changes from a circle to gradually diminishing ellipses until it becomes a straight line.
• The multi direction motion can easily be converted into a uni-direction motion.
• The instrument is equipped with solid stat electronic digital pre-settable counter of 5 digit. The Standard weight of each specimen holder is 400 gms.

Standard ASTM 3786 Suitable for Fabric/Paper/Leather & LDPE/HDPE Products & Corrugated Boxes

• Equipped with Microprocessor Based LCD Display Controller
• Suitable to test sample upto60kg/cm
• Displays Resolution of 0.1 or 0.01 kg/cm
• Digital Indication for accurate reading
• Controller having Facility to Adjust Unit Selection vizKg/Sq.cm, Bar, PSI, KPa & MPa
• Stores data upto last Ten readings & gives Average Value, Max. Value & Min. Value of the Tests
• Facility to perform batch testing up to 10 test and record data in memory
• Quick, Easy, Accurate & User Friendly Operation- As M/c. Stops automatically on completion of the test and also having Auto Reverse facility.
• The machine is equipped with 1/4th H.P.Geared Ele. Motor. Also Equipped with Variable Speed Drive to control flow of Hydraulic Fluid

• To determine the bending length Flexural rigidity and bending modulus of fabrics
• Supplied with specimen cutting template and graduated measuring scale.

• Accurate determination of recovery properties of fabrics against creasing.
• Specimen loading device and standard weight supplied for hands-on-use

STANDARDS: ISO 105, BS 1006, AATCC 92 , 114, 117, 133

• Test the effect of dry heat on sublimation properties of dyestuff.
• Fixed temperature of 150C, 180C & 210C on each pad or variable by 30C of the fixed temperature setting.
• Number of heating station 3.
• Number of pads 6, 2 for each stations with individual heating.
• Size of each pad 40 mm to 100 mm.
• Timer range 10 to 60 second.

To Check the Shrinkage Percentage Directly

• To determine directly the % Dimensional Change (shrinkage) in all types of fabrics.
• Fine Calibrated Shrinkage Template with nine 14 Inches Benchmarks.
• Calibrated Scale to Check the Shrinkage directly from 0-15%
• Even the Stretch can be directly measured upto 15%
• Two fine tipped Yellow Fabric Markers for accurately marking on the Dark Colored Fabric.

Two fine tipped Black Fabric Markers for accurately marking on the Light Colored Fabric.

• To assess the nep content in card/drwing sliver.
• Based on traditional method of counting number of neps per 100 square inch.
• An assorted accessory makes the test simpler.

• This is the latest Instrument developed to evaluate the Snarling Tendency of High Twisted Yarns (Single & Double) before steaming and after steaming, Instrument helps standardizing steaming timings of High Twisted Yarns to that Snarling Tendency is minimum.
• Because of High twist yarn has the Snarling tendency which affect the further processes resulting in damages . To control this snarling effect, yarn is steamed and is processed further, Steaming of yarn reduce the snarling tendency. Standardization of steaming timing save the fuel cost and Good Economic saving is made. Spare hooks are also available at our end (Hook Weight)

(A) For Single Yarn. Cap.10/50kg. LCD & Computerised.

(B) For Lea. Cap.100/500kg. LCD & Computerised

(C) For Lea/Fabric & Single Yarn Cap.5kg to 500kg. Computerised in Single Machine

(D) For Fabric, Rubber, Metal, Strip, Plywood, Wire & Paper etc.etc.Cap.250kg/10T LCD & Computerised

Standards ISO, ASTM, BS, IS.

• Machine suitable for Fabric/Lea testing
• Single screw heavy duty frame structure balance load facility for smooth working and operation
• Machine is Floor mounted model with microprocessor based computer supported software system.
• Machine can work on both directions Tensions
• Machine is suitable for Fabric/Yarn lea application.(Strength & Elongation)
• Machine is fully digital model with accuracy.
• Speed selection is 300mm & 450mm speed A.C. Drive.
• Speed change settable with digital key Pad on A.c.Drive
• Extension resolution 0.01mm
• Extension accuracy. 1mm
• Extension measurement grip to grip.
• Force Measurement and detection via. Digital load cell. Accuracy 0.5% of applied force.
• Real Time Graph of Load vs. Extension is displayed during the test.(incase of computer interfacing)
• User can convert graph into Stress vs. strain at any instant.
• Easily Unit conversion facility also available after completion of the test.
• Easy storage and retrieval of test profiles.
• Manual cross head, up, down, stop control
• Input of test data formatting of test report via. computer software.

Note -Computer with printer is required at customer end. The same has to be arranged by you at your cost. Computer features having windows XP loaded software and Microsoft office 2003 loaded PC.

Load Cell 1 No

• Range: 250kgf.
• Least Count: 0.01kg and accuracy 10 gms at 250kgf
• Load cell is permanently fixed. No Need to change any fixture
• Window based test software supplied along with the machine.

Load Cell -1 No.

• Range: 500kgf.
• Least Count: 0.1kg and accuracy 10 Gms at 500 kgf.
• Load cell is permanently fixed. No Need to change any fixture.
• Window based test software supplied along with the machine.

• Machine confirms to IS-6489-1979, ASTM D-689-1979
• Elmendorf type Cap.0-1600, 0-3200 and 0-6400 grams.
• Supplied with augmenting weights and set of Brass Calibration weights complete.
• Complete unit with standard accessories.

Standards BS 5811, IWSTM 152, NEXT 19, M&S P18, P18A, P18B, P21A BS EN 12945-1

• With 2 Wooden boxes
• Internal size 9"x9"x9".
• Best Quality rubberized Cork Sheet of 3 mm thickness.
• Fixed speed of rotation of boxes is 60 RPM.
• Size of Test specimen is 125.5mm x 125mm ID x 150mm long.
• Size of Pilling Tubes: 32mm dial x26mm x 150mm long having Shore Hardness of 65 degree
• Equipped with H.P. Single Phase Geared Motor.
• Pre-settable Counter having 5 digits(99999) sensed by best quality Proximity Switch
• Supplied with Specimen mounting Jig, Specimen Cutting
• Template & 8 Nos. Pilling Tubes

Standards ISI2673-1989, IS-2634-1987, IS-3919-1987, IS-635801971 and ASTM D- 4966

• This precision built multi-purpose machine Rubs the material in Multi-direction for measuring resistance to surface.
• The path traces by Multi-motion is known as Lissaious Figure, changes from a circle to gradually diminishing ellipses until it becomes a straight line.
• The multi direction motion can easily be converted into a uni-direction motion.
• The instrument is equipped with solid stat electronic digital pre-settable counter of 5 digit. The Standard weight of each specimen holder is 400 gms.

Standard ASTM 3786 Suitable for Fabric/Paper/Leather & LDPE/HDPE Products & Corrugated Boxes

• Equipped with Microprocessor Based LCD Display Controller
• Suitable to test sample upto60kg/cm
• Displays Resolution of 0.1 or 0.01 kg/cm
• Digital Indication for accurate reading
• Controller having Facility to Adjust Unit Selection vizKg/Sq.cm, Bar, PSI, KPa & MPa
• Stores data upto last Ten readings & gives Average Value, Max. Value & Min. Value of the Tests
• Facility to perform batch testing up to 10 test and record data in memory
• Quick, Easy, Accurate & User Friendly Operation- As M/c. Stops automatically on completion of the test and also having Auto Reverse facility.
• The machine is equipped with 1/4th H.P.Geared Ele. Motor. Also Equipped with Variable Speed Drive to control flow of Hydraulic Fluid

• To determine the bending length Flexural rigidity and bending modulus of fabrics
• Supplied with specimen cutting template and graduated measuring scale.

• Accurate determination of recovery properties of fabrics against creasing.
• Specimen loading device and standard weight supplied for hands-on-use