Post Buy Requirement
TT

Tesca Technologies Pvt. Ltd.

Verified Add Review

Other Products / Services

Our product range contains a wide range of Desert Cooler Trainer, Basic Antenna Trainer, Fertilizer Recommendation Kit, training workshops and project assistance centre for students

Electronics Tool Kit

Electronics Tool Kit
Hand / Power Tools
ORDER CODE11901
VIEW/DOWNLOAD
SPECIFICATION

Electronics Tool Kit is the elegant combination of basic electronic tools required for electronics lab in Schools, Colleges, Universities, Research &Development and Industries. Electronics Tool Kit is housed in metal box for long life and includes the necessary 12 items in the same.

FEATURES:-
01. Screw Driver Set 1
02. Fine Screw Driver 1
03 Wire Cutter/Stripper 1
04 Line Tester 1
05 Analogue Multimeter 1
06 Crimping Tool 1
07 Nose Pliers 1
08 Flat Pliers 1
09 Soldering Iron 1
10 Flux 1
11 SolderWire 1
12 Brush 1
13 Box 1
View Complete Details

Desert Cooler Trainer

Desert Cooler Trainer works on the principle of evaporative cooling. It is used mostly in the dry hot regions; it consists of a fan which sucks the air from atmosphere through the pads which are used in desert coolers very frequently. The difference in DBT & WBT at inlet and outlet can be measured hence the RH from the charts. Also the amount of water evaporated can be calculated by knowing the water level difference in the reservoir.
SPECIFICATIONS:
1.Fan connected to 1/2 HP motor.
2.Air Cooler Pump to circulate water.
3.DBT & WBT Measuring Thermometer at inlet and outlet.
4.Orifice meter with manometer to measure the air flow.
A technical manual accompanies the unit.
SERVICES REQUIRED:
1.Floor Area - 1, X 1 m. X 1 -5m. Height.
2.220 V., 15 Amp. , Single Phase Stabilized power supply
View Complete Details

Solar Power Inverter

Tesca Solar Energy offers a range ofpre-configured solar power packswhich include solar panels, PCU, Charge controller and accessories whichare installed by dealers. Solar power packs are easy to use and eliminatethe need for extensive configuration as they have been put togetherafter extensive research by our R&D team for the maximum efficiency.
Tesca Solar Energy power pack is a solar cum mains hybrid inverter withsolar charging priority to power domestic appliances like CFLs / Tubes, Fans, T.V., Computer etc. The unit consists of solar panel, batteries, &
solar /Mains charge controller cum inverter with logic circuit.

SYSTEM DESCRIPTION
Solar Photovoltaic Modules:
A solar photovoltaic module is the basic element of each photovoltaicsystem. It consists of number of solar cells arranged and connected in adefinite pattern. It converts solar energy into electrical energy whensunlight falls on its surface.

Solar Inverter Cum Charge Controller With Intelligent Logic Control:
Solar Inverter converts DC (Direct current)power from the battery to AC (Alternating current) power compatible withthe utility and AC loads. This unit consists of Solar Inverter cum Charge Controller with Intelligent Logic whichcontrols the charging of battery from solar or mains with solar aspriority.
This system monitors the Battery charge status and accordingly decides to charge the battery either from solar orfrom mains. First priority of charging is from solar modules and only in the absence of solar power (no-sunshinetime) and when battery voltage is low (a predetermined level), the mains charger is turned ON automatically. Thismaintains the battery on float.
When battery bank reaches a preset low voltage, mains charger turns "ON" and charges the battery bank. Next day, when solar radiation is available, the cycle repeats. This ensures healthiness of battery and hence the life of thebattery gets extended. Battery deep discharge, over charge protections are incorporated inside the Solar Inverter.

BATTERY
A device that converts the chemical energy contained in its active materials directly into electrical energy by meansof an electrochemical reaction. Low maintenance, tubular type batteries are provided with this system.

MODELS AVAILABLE
500Watt, 1KW, 2KW, 3KW, 5KW, 10KW

FEATURES
System designed for optimum performance.
Fully automated operation.
Add-on solar charging system available if home inverter is already installed - increase back-up time and save onpower bills.

TECHNICAL SPECIFICATIONS

SN. Order Code Module PCU Battery Size Max Load Backup Time
1. 26041A 500W 24V 850VA 100AH x 02 400W 06Hours
2. 26041B 1000W or 01KWp 48V 01KVA 100AH x 04 800W 06Hours
3. 26041C 2000W or 02KWp 48V 02KVA 150AH x 04 1500W 06Hours
4. 26041D 3000W or 03KWp 48V 03KVA 150AH x 03 2300W 06Hours
5. 26041E 5000W or 05KWp 96V 05KVA 150AH x 08 4000W 06Hours
6. 26041F 10000W or 10KWp 180V 10KVA 150AH x 15 8000
View Complete Details

Solar Water Heater

Solar thermal systems use sunlight to heat water - for domestic use and commercial usage.Flat-Plate Collector (FPC): Glazed flat-plate collectors are insulated, weatherproofed boxes that contain a darkabsorber plate under one or more glass or plastic (polymer) covers. Unglazed flat-plate collectors -- typically usedfor solar pool heating --have a dark absorber plate, made of metal or polymer, without a cover or enclosure.Evacuated-Tube Collectors(ETC): They feature parallel rows of transparent glass tubes. Each tube contains aglass outer tube and metal absorber tube attached to a fm. The fin's coating absorbs solar energy but inhibitsradiative heat loss. These collectors are used more frequently for U.S. commercial applications.A typical 100 LPD (litre per day) system is sufficient to provide approximately 100 litres of hot water at an averagetemperature of 65C every day on all sunny days. This helps save approximately 4 units of electricity daily(equivalent energy consumed by an electrical geyser) offering cost benefits of approximately Rs 4, 000 per year. TPSsolar water heaters are available in scalable multiples of 100. Large scale installations, for special applicationsQuality: Durable and long life (life expectation more than 15 years)Service: Strong dealer network across country & well trained installation teamTechnology: Triplolayered evacuated tube technology for rapid water heatingBetter Insulation: Specially insulated storage tanks retain hot water for considerable amount of time, withminimal temperature drop at nightSuited for Indian conditions: Our storage tanks are specially suitable for Indian hard water conditionsOptimum conversion threshold: Higher efficiencyEasier to install & maintain: Makes the system suitable for varied projects.

Solar water heaters are available with us in the following sizes:
1. 26021A Non Pressure 100 Liters2. 26021B Non Pressure 150 Liters3. 26021C Non Pressure 200 Liters4. 26021D Non Pressure 250 Liters5. 26021E Non Pressure 300 Liters6. 26021F Non Pressure 500 Liters
View Complete Details

Insulating Oil Tester

Insulating Oil Testers are designed for the easy and accuratedetermination of the die-electric strength of insulating oils used intransformers, switchgears, bushings, capacitors and other electricalapparatus. They are ideal for on-site field and laboratory use.
HV Transformer
The HV transformer is a completely dry resin encapsulated transformerwith two HV terminals with mounting saddles. The midpoint of thetransformer HV winding is earthed so that the voltage of each terminal to
earth is only half the test voltage.
Safety
Maximum possible safety of the operator as well as the equipment isensured by a safety conscious design. The output controller isinterlocked at its minimum position so that HV can be switched ON onlywhen the voltage controller is at zero and the hood is shut. The outputcontroller must be brought to zero after every test or interruption. Thehood leading to HV terminals has a safety switch fitted so that openingof the hood shuts the HV OFF.
Cabinet
Portable, powder coated, sheet steel with lifting handles.
Test Cell model TC-2
The test cell with cover is made of Methyle Methacrylate ( Acrylic )having effective oil volume between 300 to 500ml with adjustable andremovable 36mm mushroom head electrodes to IS 6792 & IEC 156along with electrode gap distance GO & NOGO gauges, made of alloysteel, precision ground and hardened.

Specifications
Input : 240V 10%, AC, 1 phase, 50/60Hz
Display : Analog models: 96mm square
Digital models: 3 digit 12mm LED
Accuracy : 4% of full scale deflection/range Shut downsensitivity
in HV circuit : 20mA max.
Rate of rise of voltage : Motorized sets

View Complete Details

Solar Power Plant

Solar energy originates in the depths of our sun. The sun endures a continuous stream of thermonuclear explosionsas hydrogen atoms are fused into helium atoms. We encounter the resultant energy as radiation that strikes thesurface of the earth. Solar panels convert this solar radiation into useful electrical energy and store them in batteriesfor our use. Enough solar radiation strikes the earth every day to meet earth's energy needs for an entire year. Solarpanels, help us harvest this energy and convert it into usable energy to meet the everyday needs of modern life.

WHAT ARE SOLAR PANELS MADE OF?
Solar panels are typically constructed with crystalline silicon, which is used in other industries also. Solar Panels are aform of active solar power, a term that describes how solar panels make use of the sun's energy: solar panels harvestsunlight and actively convert it to electricity. Solar Cells, pr photovoltaic cells, are arranged in a grid-like pattern in asolar panel.

On Grid Solar Power Plant Available for all Wattage Requirement on Per Wattage Basis.

View Complete Details

Domestic Refrigerator

Refrigeration Trainer - Domestic Type
Refrigeration & Air Conditioning Lab
ORDER CODE29601B
VIEW/DOWNLOAD
SPECIFICATION

The unit enables students to study the various parameters affecting the performance of a domestic refrigerator. It consists of refrigeration cycle of domestic refrigerator, it consists a hermetically sealed compressor, air-cooled condenser, capillary tube and a natural convection type evaporator. The evaporator is fitted with a small heater to simulate different load conditions various measurements are provided so that power consumption, COP, theoretical and actual refrigerating effects refrigerant flow rate and effect of door opening on power consumption can be studied
and also students can visualize automatic operation of unit using a thermostat.
SPECIFICATIONS:
1.Compressor - Hermetically sealed, Kirioskar make having capacity of approx. 1/25 ton of refrigeration.
2.Air - cooled condenser with natural convection airflow.
3.Capillary tube of matched length as expansion device.
4.Evaporator coil with an electric heater inside and adequate glass wool insulation on all side.
5.Measurement
a) Energymeter Tore compressor input power measurement.
b) Pressure gauge for condensing and evaporating pressure.
c) Flow meter for liquid refrigerant flow
d) Digital Temperature indicator for measurement of temperature
6.safety & Controlsa) High & low pressure cutout.
b)Thermostat.
c)Necessary Switches.
A technical manual accompanies the unit. Also, the unit is provided with an attractive and rust proof powder coating.
SERVICES REQUIRED:
1.Floor space of 2m x 1m.
2.230V AC stabilized supply with earthing connection
View Complete Details

Window Air Conditioner

Window air conditioner is becoming now a days necessity. The unit demonstrates the application of window air conditioner & evaluation of its performance. It consists of a small room to which a small air conditioner is connected the room is provided with a transparent front cover with a heater inside to simulate heat load in the room. Various measurements are provided so that performance of system that is COP of system, actual & theoretical cooling
capacity of system & power consumption of unit with different load conditions.
SPECIFICATIONS:
1.Compressor - Hermetically sealed, Kirloskar make, having the capacity of 1/10 ton of refrigeration using R-
12 refrigerant to keep room temperature between 20 to 30 c.
2.Condenser - Finned tube type, with forced air flow over the tubes,
3.Capillary tube of matched length as expansion device.
4.Evaporator - Finned tube type with forced air flow,
5.Room 0.6 X 0.7 X 0.7 m. height, provided with transparent front wall. A heater with input control is
provided inside the room. Which simulates different load conditions.
6.Measurements and Controls
a) H.P. / L.P. Pressure gauges
b) Digital temperature indicator to measure the temperatures at various points.
c) Energy meters to measure input to compressor & heater.
d) High and low pressure cutout.
e) Thermostat to put off the compressor at set room temperature.
f) Necessary switch for electrical components.
SERVICES REQUIRED:
1.Floor area of 2m X 1 m.
2.230V, 15AC stabilized supply with earthing connection
View Complete Details

Solar Lantern

SPECIFICATION

A solar lantern is a lamp that provides light at all the times and recharges using the sun's energy. In rural India, solarlamps, commonly called solar lanterns, using either LEDs of CFL, are being used to replace kerosene lamps.

FEATURESCan light up an entire room ( 10x1 0 feet)Zero maintenance lead acid batteryClear acrylic lens for increased visibilitySmar battery management system with indicationsNo dependence on grid or kerosene for power

SPECIFICATIONModule - 5WpBattery - 12V 5AHW-LED - 3WattAccessories - Ports for Mobile Charging, On Off Button, Wiring and Cable for Charging
View Complete Details

Ice Plant Trainer

The Plant uses ice can system. The cans filled with fresh wafer are kept in a tank in which brine is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and ice formation takes place.
SPECIFICATIONS:
1.Compressor : Kirioskar make hermetically sealed compressor using R 12 Refrigerant.
2.Condenser : 4 row type air cooled.
3.Expansion Valve : 0.5 TR capacity.
4.Evaporator : 1/2" O.D. copper tube - 75 feet long.
5.Filter Drier : Silica gel filled - 3/8" flare connections.
6.Main Tank : 600 mm X 375 mm
7.Total Ice Cane Capacity : 7 Kg
8.Ice Making Capacity : 7 Kg / 4 Hours.
9.Thermocol insulation : 6.5"
10.Brine Stirrer : Motor driven fan, 1 phase, 1/10 HP, 1440.
INSTRUMENTATION:
1.Temperature Indicator : Digital Type O300c, with 1 c least count, using Cr/Al thermocouples.
Accuracy 1 % of full reading. 2.Compressor Energy Meter : Single Phase, 10 - 20 Amp. Capacity.
3.Pressure Gauge:
a) 0-21 Kg/cm2
b) -1 to 10.6 Kg/cm2
c) Both of 65 mm dial.
4.Digital Thermometer
CONTROLS:
1.HP/LP Cutout : Auto reset type.
2.Thermostat : Auto reset type.
A technical manual accompanies the unit.
SERVICES REQUIRED:
1.Floor Area - 2m. X 1.5m. X 1.5m. Height.
2.220 V., 15 Amp.Single Phase Stabilized power supply
View Complete Details

Basic Antenna Trainer

Basic Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly used antennasin UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode. In this system, receiving antenna is rotatedmanually from 0 to 360 degrees and accordingly the signal strength can be monitored on the Receiver. It comes with a Polar plotting software forstoring readings manuallyThe system consists of a set of two tripods one for mounting the transmitting antenna and another for mounting the receiving antenna, 11Antennas, RFTransmitter/ Receiver, Antenna Plotting Software and relevant accessories/ cables.
Network Analyser: RF Transmitter & Receiver:Frequency : 86 - 860 MHz PLL synthesizedStep Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MhzAccuracy : 0.01%Display : 16X2 Backlit LCDFunctions : Menu, Enter, Escape, Up & DownMemory Location : 1000 individual frequencies and level can be stored/recalledOutput Impedance : 50 OhmsRF Level : 90 dBuVTypicalMeasurement : RF level in dBuV with 0.1dB resolutionDynamic Range : 60 dB LogManual Mode : Data logging for antenna gain & polar/cartesian plotUSB interface : Easy connectivity to PC using polar pattern plotting softwarePower Supply : 230V @ 50 Hz

Experiments:

  • Variation of field strength with distance
  • Plot radiation pattern of omni directional antenna
  • Plot radiation pattern of directional antenna
  • Polarization of vertical and horizontal antenna
  • Study resonant and non resonant antenna
  • Demonstrate reciprocity theorem of antennas
  • Study current distribution along the element of antenna
  • Study different antennas polar plots, radiation patterns, gain, beam width, front back ratio
  • Comparison of different antennas

Shipping List :
Antennas Other Accessories
01. Dipole L/2 a. RF Transmitter Tripod & Receiver Tripod
02. Dipole L/4 b. Experimental Manual
03. Dipole 3L/2 c. Antenna Plotting Software CD
04. Folded Dipole
05. Yagi Uda (3E)
06. Yagi Uda (4E)
07. Ground Plane with Reflector & Director
08. Endfire (Phase Array L/2)
09. Square Loop
10. Zepplin/ Horizontal End Feed
11. Broadside Array L/2

View Complete Details

Water Cooler

The apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, cooling cycle comprises of a hermetically sealed compressor, air-cooled condenser, a capillary tube as expansion device and an evaporator cell. The stainless steel water tank is provided with insulation on air Sides and a door are provided at the top. Cold water can be taken out from a top provided and inlet water supply is controlled by a bail-operated top. Various measurements provided enable students to determine the theoretical and actual COP, power consumption, actual cooling capacity refrigerant flow and compressor volumetric efficiency of compressor.
SPECIFICATIONS:
1.Cooling Cycle
a)Compressor Hermetically sealed type, having the capacity of 1/3 ton of refrigeration using R-12 refrigerant.
b)Finned tube type air colled condenser with forced air flow.
c)Filter cum drier for refrigerant.
d)Capacity expansion device.
e)Evaporator coil embraced on stainless steel water tank, Provided with glass wool Insulation.
2.Water drain tap and float operated inlet water tap are provided for water tank with insulated lift door at top.
3.Measurement
a)Pressure gauges for evaporating and condensing pressure.
b) Thermometers to measure refrigerant temperatures at inlet and out let of condenser and evaporator.
c) Dial type thermometer for water temperature.
d) Rotameter to measure liquid refrigerant flow.
e) Energymeter to measure compressor Input.
4.Safely & Controls - a)Thermostat to put off compressor at set water temperature.
b)Pressostat to put off compressor if high or low pressure Goes out of set limit.
c)Over load protector for compressor,
A technical manual will be supplied along - with the unit. Also, the unit is provided with an attractive and anti corrosion powder costing.
SERVICES REQUIRED:
1.Floor space of 1.5 m. X 1.5 m.
2.Water supply of 5 lit/min,
3.230 V, 15A AC stabilized supply with earthing connection
View Complete Details

Steam Power Plant

SPECIFICATION

Introduction:
Steam Power Plant Working Unit This Unit Helps The Students To Understand The Complete System Of A Thermal
Power Plat.
1.Heat Energy Converts Water Into Steam
2.Steam Pressure When Moves A Engine Or Turbine Produces Mechanical Energy
3.Finally Mechanical Energy Is Converted Into Electricity Through Alternator
Parts Details of Boiler:
1.Boiler -- For The Generation Of Steam We Have Provided Electrically Heated Boiler.
2.Diameter Of Boiler 400 mm
3.Length Of Boiler 600 mm
4.Heater 2 Pcs. 3 KW (Each)
View Complete Details

Beaker

SPECIFICATION

Tesca Beakers, moulded in Polypropylene, have excellent clarityand very good chemical resistance. These autoclavable Beakershave prominently raised graduations on the other surface. Pouring asolution becomes very convenient because of its tapered spout.

Material: Polypropylene
 

Code No. Particulars Least Packing
P11101 50 ml. 5 12 Pcs
P11102 100 ml. 5 12 Pcs
P11104 250 ml. 10 12 Pcs
P11105 500 ml. 10 12 Pcs
P11106 1000 ml. 25 6 Pcs
P11107 2000 ml. 250 6 Pcs

View Complete Details

Calculator Geometry Box

Features
Two-line display
79 Step Input Capacity
Replay Memory
Error Locator
Basical Calculations
Memory Calculations
independent Memory (9 Variables)
Fraction Calculations
Percentage Calculations
Scientific Function Calculations
Trigonometric/Inverse Hyperbolic Functions
Common and Natural Logarithms/Antilogarithms
Square Roots, Cube Roots, Roots, Squares, Cubes
Reciprocals, Factorials, Random Numbers
Conversion Calculations
Coordinate Conversion
Permutation
Combination
Statistical Calculations
Degrees, Minutes, Seconds Calculations
10 Mode Selections
Calculator Modes:
[Normal
[Standard Deviation
[Regression
Angle Unit Modes:
[Degrees
[Radians
[Grads
Display Modes
[Exponential Notation
[Decimal Place Specification
[Significant Digit Specification
Specifications
This Calculator requires 2 Batteries, Ag13 (Included)
No Audio or Noisy Keys
Cordless
Non Programmable
No operation keys like: RUN, LRN, HLT,
PROG-PMG, PRINT, ALPHA
No Magnetic Card or Plugins of Program Instructions
No Media or Sim Card Slot
View Complete Details

LV AC Drive Panel

The success of an Electrical Project not only depends upon procurement and use of best available equipment and technical advice but also on their expert handling, scientific sequencing of factory staging, fool proof installation and interconnection of various electric components in the

View Complete Details

Bread Board Trainer

SPECIFICATION

The DIGITAL LAB is intended for elementary as well as advance training of digital electronics. The digital lab covers regular digital circuits bysolder-less interconnections on breadboard and as well as compatible with all optional modules through use of 2mm brass terminals and patchcords. Various clock generators, logic level input/output indicators and DC regulated power supplies etc. are in-built. The unit housed inattractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set.

Features:
Bread Board : Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280 tiepoints and 4 Distribution Strips with 100 tie points each, totaling to 1680 tie points. (Size : 112mm x
170mm approx)Regulated DC Power Supply : 5V at 1 Amp, -5V at 500 mA, 3 to 15V at 500mA, and -3 to -15V at 500 mA.Pulse Generator : 1 Hz to 1 MHz in 6 Steps. Variable in between steps- Amplitude : 3-15V (CMOS), 5V (TTL)- Duty Cycle : 50% TTL / CMOS OutputPulsar Switches : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of thecounter after every clock pulse)Data Switches : 12 Nos. independent buffered logic level inputs to select High / Low TTL levels, each with a bi-colorLED to indicate high / low status and termination.Logic Indicators : 12 Nos. independent buffered logic level indicators for High / Low status indication with bi-color LEDfor digital outputsSeven Segment Display : 2 Nos. BCD to Seven Segment Decoder / Driver IC with terminalsLogic Probe : Logic level indicator for TTL / CMOSCMOS/TTL : ProvidedPower : 230 V 10%, 50 HzComponents Provided : ICs-4001/1, 4049/1, 4069/1, 7400/1, 7402/1, 7404/1, 7406/1, 7408/2, 7410/2, 7411/3, 7420/2, 7432/3, 7474/2, 7476/2, 7486/1.Resistors-330E/1, 1K/2, 1K8/1, , 15K/1, 47K/1.1M/2, Capacitors- 0.01mF/1, 0.1mF/1, 0.22 mF/1, Crystal-32.768MHz/1.Accessories : Mains cord, Operating and Experimental manual, Red & Black patch cords (2mm with Pin) 10 each, Red & Black patch cord (Pin to Pin) 10 each. Wire 24/25 SWG. 1Meter each 5 Colour Instructionmanual : Strongly supported by detailed operating instructions.
View Complete Details

Solar Street Light

The sun is an inexhaustible, reliable, non-polluting source of power. Concerns over global climatic change, local airpollution, and resource scarcity make photovoltaic (PV) an increasingly attractive energy supply technology. Usingsolar energy with LEDs instead of CFLs provides a very efficient solution.
Solar powered outdoor lighting products are ideal for lighting the area in remote locations where the electricity isunavailable or erratic. Even in urban areas, these find great usage to reduce dependency on conventional power andcontribute towards green energy. Reliable and long life makes this solution effective in fulfilling our present andfuture lighting requirements.

SYSTEM DESCRIPTION
PANEL: Only A-brand quality mono- and poly- crystalline silicon solar panels with high efficiency and long lifetimeare used.
LED.: High Lumen LED modules for maximum efficiency. Dedicated designed low-voltage solar controller technologywith dimming capabilities for power-save management.
CONTROLLER: Highly efficient controller to charge your batteries and intelligent microprocessor controlled
algorithms for light management ensure maximum up time by autonomously determining sunrise and sunset.
BATTERY: Specific deep discharge batteries are used to store the energy, provide energy for immediate
requirements, and enable a back-up for days when there is little or no sun.

FEATURES
Solar panels do receive as much direct sunlight on cloudy, rainy days, and in the Winter. Therefore, the number ofhours stays on will not be reduced during those days.
The construction of this solar LED light is sea front-resistant, and you will enjoy years of trouble-free use in allweather conditions if installed properly.

BENEFITS
No line voltage, trenching, or metering.
No power outages.
Battery backup for cloudy or rainy days.
Independent power and light source- no two systems are connected, hence no single point of failure.
Easy to install.
No maintenance except for the battery.
No cost of transformers or meters to be added for electric service.
Qualify for savings from various state taxes and incentives.
No monthly electric bills.
Controlled charging to prolong battery service life.
Long-life PV modules with more than 25 years of power generation capacity.
Environment friendly - 100% powered by the sun, solar panels reduce fossil fuel consumption, eliminating
Pollution.
IP 65 Luminaries ensures long lasting and consistent high performance. Self-contained solution - Light on/off
No running cost.
Better and long life light source - LED lights feature white light without flickering and instant on.
Safe 12/24 volt circuit, no risk of electric shock.

TECHNICAL SPECIFICATIONS (Solar Street Light)

SN. FEATURE Order Code - 26012A Order Code - 26012B Order Code - 26012C
1. MODULE 40Wp 60Wp 75Wp
2. BATTERY 12V 40AH 12V 60AH 15/18V 75AH
3. W-LED 12 WATT 12 WATT 12 WATT
4. GALVANISHED POLE 5Mtr Above Ground Level 6Mtr Above Ground Level 6Mtr Above Ground Level
5. BATTERY BOX Plastic/Galvanised Plastic/Galvanised Plastic/Galvanised
6. CABLE BIS Marked BIS Marked BIS Marked
7. WARRANTY 5 years Warranty 5 Years
Comprehensive onsite Maintenance
5 years Warranty 5 Years
Comprehensive onsite Maintenance
5 years Warranty 5 Years
Comprehensive onsite Maintenance



View Complete Details

School Shoes

SPECIFICATION

School Shoes - OxfordSize UK - Kid 08-13 & Adult 1-10)

View Complete Details

Fertilizer Recommendation Kit

Digital Soil Test and Fertilizer Recommendation Kit (Digital Soil Testing Mini Lab). This soil testing kit helps farmers in testing14 parameters of soil recommends crop-specific fertiliser dose for 100 crops within a short time and at a centre nearby, andthus helps them to achieve higher yields, increase their income and keeps soil fertile. The meter is Manufactured under licensefrom ICAR - Indian Agricultural Research Institute (ICAR - IARI) Pusa Delhi.

Digital Soil Testing Mini Lab (33001)
SOIL TESTING METER: Determines 14 parameters of soil, recommends crop-specific fertiliser dosefor 100 crops & prints Soil Health Card. Sends Soil Test Report on SMS. 5 hours in-built batterybackup, solar charging functionality & computer connectivity. Contents: Soil Testing Meter, RotaryShaker, Thermal Printer, Solar Panel, Small Weigh Balance, Glassware, Plasticware, Free ReagentsKit of 14 Parameters for 50 Samples.

Extra Reagents Kit (14 Parameters - 50 Samples) (Consumables Optional)(33001A)
Extra Reagents Kit adequate for detecting quantitative contents and getting crop-specific fertiliser Recommendations for 50 samples each for Organic Carbon (OC), Nitrogen (by calculation) (N), Phosphorus (P), Potassium (K), Zinc, Sulphur, Boron, Iron, Manganese, Electrical Conductivity (EC), pH, Lime requirement test for acidic soil & gypsum requirement test for alkaline soil. Kit sufficient tocarry out 50 test samples for each parameter.

Extra Reagents Kit (14 Parameters - 100 Samples) (Consumables Optional)(33001B)
Kit sufficient to carry out 100 test samples for each of 14 parameters.

14 PARAMETERS OF SOIL:
1. Available Organic Carbon (OC)
2. Available Nitrogen (N)
3. Available Phosphorous (P)
4. Available Potassium (K)
5. Available Zinc (ZN)
6. Available Sulphur (S)
7. Available Boron (B)
8. Available Iron (FE)
9. Available Copper (CU
10.Available Manganese (MN)
11.Electrical Conductivity (EC)
12.pH
13.Lime Requirement Test For Acid Soil
14.Gypsum Requirement Test For Alkaline Soil

Features Digital Soil Testing Mini Lab:
Tests 14 parameters of soil
Recommends crop-specific fertiliser
dose 100 crops
Prints Soil Health Card
Sends Soil Testing Report on Mobile
Has 6-hours in built battery back-up
Has solar charging functionality
Comes with Pen Drive with training
videos and printed User Manual

Contents of the Kit:
Digital Soil Testing Meter With 6-hours in builtbattery back-up & solarcharging functionality
EC & pH ElectrodesThermal PrinterRotary Shaker PlatformSize: 300mm x 300mmReagents Kit for 14parameters of 50 samples(Can be later refilled)(Chemicals Kit)Solar Panel
Accessories Kit
Plasticware
Glassware
Pocket Size Weigh Balance
Pen Drive with TrainingVideos
Printed User Manual

Features Digital Soil Testing Mini Lab:
Tests 14 parameters of soil
Recommends crop-specific fertiliserdose 100 crops
Prints Soil Health Card
Sends Soil Testing Report on Mobile
Has 6-hours in built battery back-up
Has solar charging functionality
Comes with Pen Drive with trainingvideos and printed User Manua

View Complete Details

Soldering Iron

SPECIFICATION

25 Watt iron is for all purpose soldering applications, design and technology.

  • Ergonomic shaped tri-grip handle with ridges for comfortable slip free use
  • Gravity centred unit designed to tilt easier while working
  • Maximum Temperature: 380C
View Complete Details

Air Compressor Test Rig

The test rig comprises of a two-stage air compressor fitted with an air tank with orifice, pressure gauges 9 an energy meter to measure the input & a Temperature indicator measures the temperatures at various points. The compressor is mounted on air receiver along with the motor, and is provided with air relief valve (safety) and a pressure switch. The unit determines volumetric efficiency and isothermal efficiency at various discharge pressures
SPECIFICATIONS:
1.Air compressor - Double cylinder, two-stage type driven by a 2-hp. Three - phase motor mounted on air receiver provided with delivery valve.
2.Air tank and orifice with water manometer for air intake measurement.
3.Pressure gauges at outlet on both stages.
4.Digital temperature indicator.
5.Energy meter to measure input power. 6.A technical manual accompanies the equipments.
SERVICES REQUIRED:
1.Floor space of 2, 5 X 1.5m.
2.440 V, 15A, 3ph. AC supply with neutral and earthing connection.
3.A hand tachometer.
View Complete Details

Electronic Workbench

Todays electronic manufacturers need a workstation designed to help reduce harmful discharges from reaching vulnerable parts and assemblies.Part of the overall solution is to have a workstation designed with the proper grounding system to dissipate any charge away from the productyoure producing. Our custom made workstations are designed to withstand the toughest of environments, allow total flexibility for futureupgrades and meet your organizations ESD needs.
Special Size Available on Request

Standard Features
Table Top Size 120 x 60 cm; Overall Height 150 cm
Workstation structure made from 20 x 40mm rectangular pipes of 18 Gauge. Available in powder coated grey colour.
ESD Mat for table top with grounding cord
Universal spike protector 230V / 50Hz, 15 Amps with four sockets
Four conductive leveling screws for base with height adjustment facility
Foot rest for user convenience Optional Accessories 28 W flicker free swivel Light
Louver panel
Conductive Bins
Tool Tray with option of fitting on Left or Right side
Modular System with lock
Special sizes available on request

View Complete Details

Anti Lock Braking Training System

INTRODUCTION:
An anti-lock braking system (ABS) is an automobile safety system that allows the wheels on a motor vehicle to maintain attractive contact with the road surface according to driver inputs while braking, preventing the wheels from locking up (ceasing rotation) and avoiding uncontrolled skidding. It is an automated system that uses the principles of threshold braking and cadence braking which were practiced by skilful drivers with previous generation braking systems. It does this at a much faster rate and with better control than a driver could manage.
ABS generally offers improved vehicle control and decreases stopping distances on dry and slippery surfaces; however, on loose gravel or snow-covered surfaces, ABS can significantly increase braking distance, although still improving vehicle control.
RINCIPLE OF ANTI-LOCK BRAKE SYSTEM:
The anti-lock brake controller is also known as the CAB (Controller Antilock Brake).
Typically ABS includes a central electronic control unit (ECU), four wheel speed sensors, and at least two hydraulic valves within the brake hydraulics. The ECU constantly monitors the rotational speed of each wheel; if it detects a wheel rotating significantly slower than the others, a condition indicative of impending wheel lock, it actuates the valves to reduce hydraulic pressure to the brake at the affected wheel, thus reducing the braking force on that wheel; the wheel then turns faster. Conversely, if the ECU detects a wheel turning significantly faster than the others, brake hydraulic pressure to the wheel is increased so the braking force is reapplied, slowing down the wheel. This process is repeated continuously and can be detected by the driver via brake pedal pulsation. Some anti-lock systems can apply or release braking pressure 15 times per second. Because of this, the wheels of cars equipped with ABS are practically impossible to lock even during panic braking in extreme conditions. Modern ABS applies individual brake pressure to all four wheels through a control system of hub-mounted sensors and a dedicated micro-controller. ABS is offered or comes standard on most road vehicles produced today and is the foundation for electronic stability control systems, which are rapidly increasing in popularity due to the vast reduction in price of vehicle electronics over the years.
View Complete Details

Solar Panel

  • Efficiency 16.14%
  • Pmax 260W
  • Vmp 30.85 V
  • ImpĀ  8.43A
  • Voc 37.3 V
  • Isc 9.3 A
SPECIFICATION

Durability
Durable PV modules, independently testedfor harsh environmental conditions such asexposure to salt mist, ammonia and knownPID risk factors.
Advanced Glass
Our high-transmission glass features aunique anti-reflective coating that directsmore light on the solar cells, resulting in ahigher energy yield.
Extended Size
Our large-format module facilitates system-level cost savings through reduced handling and installation times.
PID Resistant Cells used
Tested in accordance to the standard IEC62804, we use Solar Cells that havedemonstrated resistance against PID(Potential Induced Degradation), whichtranslates to security for your investment.

ectrical parameters at Nominal Operating Cell Temperature (NOCT)
Pmax   W 260
Power output Pmax W 189.85
Voltage at Pmax Vmpp V 27.25
Current at Pmax Impp A 6.97
Open-circuit voltage Voc V 34.8
Short-circuit current Isc A 7.48
View Complete Details

Portable Toll Booth

  • Operating Frequency 13.56 MHz
  • Place of Origin Rajasthan, India
  • Packaging Details Corrugated Box
  • Operating Range Less than 10 cm
  • Product name RFID Application Trainer
  • Brand Name Tesca
View Complete Details

Electro Pneumatic Trainer Kit PLC

  • Application Training Center
  • Color White
  • Place of Origin Rajasthan, India
  • Category Pneumatic
  • Material Aluminum
  • Supply Ability 100 Piece/Pieces per Month
  • Product name Basic Electro Pneumatic Trainer Kit PLC
  • Usage Training
  • Certificate ISO9001 2008
View Complete Details

Multi Output DC Regulated Power Supply

  • Supply Ability 100 Piece/Pieces per Month
  • Model Number 17130
  • Port India
  • Packaging Details Corrugated Box
  • Place of Origin Rajasthan, India
View Complete Details

Manual Coil Winding Machine

  • Model Number 12001
  • Place of Origin Rajasthan, India
  • Product name Coil Winding Machine
  • Port India
View Complete Details

Digital Ic Tester

  • Brand Name Tesca
  • Model Number 68027
  • Packaging Details Corrugated Box
  • LCD Display 16x2
  • Supply Ability 100 Piece/Pieces per Month
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us