Our Products
Our product range contains a wide range of rat guards, Airless Paint Spray Tips, Gun and Hose Kits, Airless Paint Sprayers Electric Powered and Male Thread Type PM Series Plug
Teryair Scuppers Plugs are available in a complete range of sizes and they are used for sealing the scupper holes for spilled oil or polluted liquids. Rubber parts are made of oil resistance rubber. It conforms to IMPA code specifications. We also offer Scupper Plugs with Plastic Plates, Brass Stems or full plastic witch would have a price advantage.
IMPA Code / Teryair Part No. | Dimensions (mm) | ||||
All Brass | Brass Stem Plastic Plates | All Plastic | Diameter Lower Plate | Diameter Upper Plate | Brochure |
232481 | 232481BP | 232481PP | 45 | 65 | |
232482 | 232482BP | 232482PP | 52 | 75 | |
232483 | 232483BP | 232483PP | 65 | 85 | |
232484 | 232484BP | 232484PP | 85 | 110 | |
232485 | 232485BP | 232485PP | 90 | 115 | |
232486 | 232486BP | 232486PP | 110 | 135 | |
232487 | 232487BP | 232487PP | 135 | 160 | |
232488 | 232488BP | 232488PP | 165 | 200 |
Teryair Rat Guards are fitted Closely on hawsers and lines
to prevent Rats from boarding the ship. Conforms with all
quarantine regulations.Teryair Rat Guards are made of
superior 28 gauge galvanised sheet. Sheet edges are
beaded around wire for increased durability.
IMPA Code | Teryair Part No | Applicable Rope Dia | Brochure |
232361 | RG60056 | 56 mm dia | |
232362 | RG60065 | 65 mm dia | |
232363 | RG60073 | 73 mm dia | |
232364 | RG28 | All smaller ropes than above |
Teryair Tungsten Carbide Spray tips are available in a wide
range of sizes. Most commonly used models are listed below
IMPA Code | Teryair Part No | Nominal No of Tip Dia | Flow Rate ltr/in | Pattern Width | ||
No. | mm | Brochure | ||||
270201 | SS 13/4 | 13 | 0.61 | 4 | 200-250 | |
270202 | SS 15/4 | 15 | 0.80 | |||
270203 | SS 17/4 | 17 | 1.02 | |||
270204 | SS 19/4 | 19 | 1.29 | |||
270205 | SS 21/4 | 21 | 1.59 | |||
270206 | SS 23/4 | 23 | 1.89 | |||
270207 | SS 25/4 | 25 | 2.27 | |||
270216 | SS 13/5 | 13 | 0.61 | 5 | 250-310 | |
270217 | SS 15/5 | 15 | 0.80 | |||
270218 | SS 17/5 | 17 | 1.02 | |||
270219 | SS 19/5 | 19 | 1.29 | |||
270220 | SS 21/5 | 21 | 1.59 | |||
270221 | SS 23/5 | 23 | 1.89 | |||
270222 | SS 25/5 | 25 | 2.27 | |||
270231 | SS 13/6 | 13 | 0.61 | 6 | 310-360 | |
270232 | SS 15/6 | 15 | 0.80 | |||
270233 | SS 17/6 | 17 | 1.02 | |||
270234 | SS 19/6 | 19 | 1.29 | |||
270235 | SS 21/6 | 21 | 1.59 | |||
270236 | SS 23/6 | 23 | 1.89 | |||
270237 | SS 25/6 | 25 | 2.27 |
Teryair High Pressure Nylon Paint Spray hoses are
made of a PVC covered nylon material which is
strengthened with stainless steel braided wire. These
Hoses are durable but lightweight and flexible.
IMPA Code | Teryair Part No | Length (Mtr) | I.D. mm | Work Pressure | Coupled With | Brochure | |
Mn. kgf/cm2 | Max. kgf/cm2 | ||||||
270161 | 4590161 | 10 | 6 | 210 | 280 | 1/4″ NPSM (F) |
|
270162 | 4590162 | 15 | |||||
270163 | 4590163 | 20 | |||||
270164 | 4590164 | 30 | |||||
270165 | 4590165 | 10 | 9 | 210 | 280 | 1/4″ NPSM (F) |
|
270166 | 4590166 | 15 | |||||
270167 | 4590167 | 20 | |||||
270168 | 4590168 | 30 |
IMPA Code | Teryair Part No | Contents | Brochure |
270117 | 4599717 | 1) St. Gun – 1No. 2) Tip – 1 No. 3) Paint Hose 1/4 x 20mtr-1lgh | |
270118 | 4599718 | 1) St. Gun – 1No. 2) Tip – 1 No. 3) Paint Hose 1/4 x 30mtr-1lgh |
Teryair Electric Powered Airless Paint Sprayers are Portablepaint sprayers with considerable operating power. Thesesprayers are totally enclosed and dont emit sparks hencethere is no danger of shorting or shocks occurring duringnormal use.
IMPA Code | 270113 | 270115 |
Teryair Part No | ESP-13 | ESP-15 |
Application | Stains to heavier architectural coatings | |
Max. Flow Ratio | 4.1 ltr/min | 3.6 ltr/min |
Max. Flow Pressure | 22.7 Mpa (227 kgs/cm2) | |
Power Source | AC 100V 50/60 Hz | |
Output Power | 2.2 HP (1.65 kw) | 2.0 HP (1.59 kw) |
Ampere | 20 A | |
Note | Guns and Hoses are supplied seprately | |
Brochure |
Teryair Air Powered Airless Paint Sprayers have much
tougher fittings including specially treated, chromed
stainless steel rods & cylinders which withstand wear and
operate over a longer span of time when pumping highly
abrasives or corrosive materials.
IMPA Code | 270106 | 270107 | 270108 |
Teryair Part No. | PPS-02 | PPS-04 | PPS-11 |
Pump Ratio | 23:1 | 30:1 | 33:1 |
Max Flow Ratio | 2ltr/min | 4ltr/min | 11ltr/min |
Max Air Work Pressure | 7kgf/cm2 | ||
Air Consumption | 4-5N ltr/cycle | 11-14N ltr/cycle | 30-35N ltr/cycle |
Dimension mm | 420 x 450 x 820 | 540 x 610 x 950 | 714 x 780 x 1258 |
Air Hose Connection | NPSM 1/4″ male | NPT 3/8″ Female | NPT 3/8″ Female |
Air Hose Connection | NPT 3/8″ Female | NPT 1/2″ Female | NPT 3/4″ Female |
Brochure |
IMPA Code/ Teryair Part No. | Size | Brochure |
For Nakajima Coupling | ||
330845 | 1½” | |
330846 | 2″ | |
330847 | 2½” | |
For ANSI PIN Coupling | ||
330848 | 1½” | |
330849 | 2″ | |
330850 | 2½” | |
For Machino Coupling | ||
330897 | 1½” | |
330898 | 2″ | |
330899 | 2½” |
A wide variety of fire hose couplings are available.They are made of bronze and are used on boardships in fire fightings.
IMPA Code/Teryair Part No. | Size | Type | Standard | Connection | Brochure |
330851 | 40A (1) | Nakajima | JIS F-7335 | Interlocking | |
330852 | 50A (2″) | ||||
330853 | 65A (2) | ||||
330854 | 25A (1″) | Machino | JIS B-9911 | Inserting | |
330855 | 40A (1) | ||||
330856 | 50A (2″) | ||||
330857 | 65A (2) | ||||
330858 | 75A (3″) | ||||
330859 | 40A (1) | Johon Morris |
BS 336 | Interlocking | |
330860 | 50A (2″) | ||||
330861 | 65A (2) | ||||
330865 | 1 1/2″ | (USA) ANSI Pin |
NH (NST) | Screw Connecting |
|
330866 | 2 1/2″ | ||||
330875 | 52C (2″) | Storz | DIN 14302 | Interlocking | |
330876 | 75B (3″) | DIN 14303 |
Teryair Male Thread Type PM Series Plug.
IMPA Code/Teryair Part No. | Hose End Size | IMPA Part No. | Brochure | ||
Steel | Stainless Steel | Brass | |||
351331 | 351351 | 351341 | PT 1/8″ | 10 PM | |
351332 | 351352 | 351342 | PT 1/4″ | 20 PM | |
351333 | 351353 | 351343 | PT 3/8″ | 30 PM | |
351334 | 351354 | 351344 | PT 1/2″ | 40 PM | |
351335 | 351355 | 351345 | PT 1/2″ | 400 PM | |
351336 | 351356 | 351346 | PT 3/4″ | 600 PM | |
351337 | 351357 | 351347 | PT 1″ | 800 PM |
Teryair Long Reach Scalers are used for cleaning and scrapingof floors and removal of floor tiles.
Features:
-Quick change accessory holder.
Range of accessories available including needle holder.
Multi length available.
Low air consumption.
IMPA No. | Teryair Part No. | BPM | Air consumption | Length | Weight | Brochure | Manual |
590451 | LR 076 | 2200 | 2.1 ltr/sec (4.5cfm) | 740 mm (29″) |
4.6Kgs (8.2lbs) |
||
590452 | LR 116 | 2200 | 2.1 ltr/sec (4.5cfm) | 1100 mm (43″) |
5.2Kgs (11.51lbs) |
||
590453 | LR 146 | 2200 | 2.1 ltr/sec (4.5cfm) | 1400 mm (55″) |
5.8Kgs (12.9lbs) |
||
590454 | LR 176 | 2200 | 2.1 ltr/sec (4.5cfm) | 1710 mm (67″) |
6.3Kgs (13.9lbs) |
Teyair Chisel Scalers are designed to be easy to use and maintain. These Chisel Scalers are ideal for removing layers of paint, corrosion, chemical coatings etc. from metal and non metal surfaces and for general purpose chipping and scaling. Many different chisel option are available.
IMPA Code | Teryair Part No | Overall Length mm |
Accessories_for_Chisel_Scalers | Air Inlet |
Air Consumption cfm |
Weight (Kgs) |
Brochure | Manual |
– | CL3 | 381 | 3/4″Square x 178mm Long | 3/8″ | 12 | 1.4 | ||
590583 | SC29PG | 339 | 1/2″Square x 178mm Long | 1/4″ | 8 | 2.6 |
Teryair Pneumatic Hand Scalers areused for removing rust, mill scale, old paint etc.
IMPA Code | Teryair Part No. | Free Speed | Air Hose Size | Air Pressure Kgf/cm2 |
Weight | Brochure | Manual |
590512 | HS-50 | 5000 | 12.7 mm | 6 | 5 Kg |
Teryair Air Line Lubricators are used foradding lubricantinto pressurized air.
IMPA Code | Teryair Part No. | Connection Thread |
Minimum Opening Flow (Ltr/min) |
Bowl Capacity (cm3) |
Weight (Kg) |
590811 | L6 | PT 1/4″ | 30 | 130 | 0.52 |
590812 | L9 | PT 3/8″ | 40 | 130 | 0.52 |
590813 | L12 | PT 1/2″ | 50 | 130 | 0.52 |
590814 | L19 | PT 3/4″ | 190 | 130 | 1.08 |
590815 | L25 | PT 1″ | 190 | 130 | 1.08 |
Teryair Air Line F.R.L. Combinations comprise of an airfilter, a regulator pressure gauge, a lubricator andintermediate connections.
IMPA Code | Teryair Part No. | Connection Thread |
Max. Flow (Ltr/min) |
Set Pressure Range |
Weight (Kg) |
590831 | FRL6 | PT 1/4″ | 4000 | 0.05 – 0.85 Mpa | 2.14 |
590832 | FRL9 | PT 3/8″ | 4000 | 2.14 | |
590833 | FRL12 | PT 1/2″ | 4000 | 2.14 | |
590834 | FRL19 | PT 3/4″ | 5000 | 3.82 | |
590835 | FRL25 | PT 1″ | 5000 | 3.82 |
Teryair Electric Powered High Pressure Cleaners aredesigned for heavy duty cleaning operations in hazardousenvironments. These High Pressure Cleanersensure safe cleaning of hazardous areas where inflammablegases andliquids exist. These heavy duty high pressurecleaners are used for removing dirt, salt, rust deposits fromship decks/floors, paint andgraffiti off walls, oil andgrease offengines.
IMPA Code | Teryair Part No. | Air Motor (HP) | Motor Speed | Working Pressure (bar) | Flow Capacity (Ltr/min) | Power Supply | Brochure | Manual |
590852 | EW1103 -220V | 3.0 | 1750 rpm | 110 | 11.7 | AC 220V 1Ph 60Hz | ||
590853 | EW1106 -220V | 6.0 | 1750 rpm | 110 | 15.2 | AC 220V 3Ph 60Hz | ||
590854 | EW1106 – 40V | 6.0 | 1750 rpm | 110 | 15.2 | AC 440V 3Ph 60Hz | ||
590855 | EW200 -220V | 7.5 | 1750 rpm | 200 | 16.5 | AC 220V 3Ph 60Hz | ||
590856 | EW200 -440V | 7.5 | 1750 rpm | 200 | 16.5 | AC 440V 3Ph 60Hz |
Teryair Portable Electric Drills are used for all conventionaldrilling of steel or wood.
IMPA Code | Teryair Part No. | Drilling Capacity | ||
AC 110V Single Phase | Brochure | Manual | ||
591001 | ED65-110V | 6.5 mm | ||
591002 | ED100-110V | 10.0 mm | ||
591003 | ED130-110V | 13.0 mm | ||
591004 | ED160-110V | 16.0 mm | ||
AC 220V Single Phase | ||||
591011 | ED65-220V | 6.5 mm | ||
591012 | ED100-220V | 10.0 mm | ||
591013 | ED130-220V | 13.0 mm | ||
591014 | ED160-220V | 16.0 mm |
Teryair Pneumatic Portable Ventilation Fans arecompressed air driven ventilators that can be used with orwithout a duct in hazardous areas such as cooling tanks orhatches. They provide ventilation of gas, paint fumes andother hazardous fumes.
IMPA Code | Model | Casing Dia. | Capacity m3/hr | Broucher | Manual |
591425 | PVF-300 | 305 mm | 3.566 | ||
591426 | PVF-400 | 405 mm | 8.665 |
Teryair Electric Portable Ventilation Fans are highlyefficient and portable. Used to ventilate hot air and harmfulgases from a tank or work area and supply fresh air and
oxygen. The ideal bell mouth type casing is highly efficient, creates little noise and is easy to install in an air duct.Related air ducts are sold separately.
IMPA Code | Teryair Part No. | Casing Dia. | Electric Source | Air Volume (m3/min) | Pressure | Speed (RPM) | Output | Weight (Kg) | Brochure | Manual |
591402 | VF-200-100V | 200 | 100V 1Ph | 20 | 25 mm Aq | 3,000 | 155 W | 9 | ||
591406 | VF-200-200V | 200V 1Ph | 3,600 | |||||||
591403 | VF-300-100V | 300 | 100V 1Ph | 70 | 30 mm Aq | 3,000 | 0.55 KW | 18 | ||
591407 | VF-300-200V | 200V 1Ph | 3,600 | |||||||
591408 | VF-400-200V | 400 | 200V 3Ph | 110 | 50 mm Aq | 3,000 3,600 |
1.5 KW | 35 | ||
591409 | VF-500-200V | 500 | 200V 3Ph | 190 | 70 mm Aq | 3,000 3,600 |
3.7 KW | 65 |
Spiral Type
Part No. | Tube Dia (mm) | Length (Mtr) | Brochure |
591481 | 200 | 5 | |
591482 | 200 | 10 | |
591483 | 300 | 5 | |
591484 | 300 | 10 | |
591485 | 400 | 5 | |
591486 | 400 | 10 | |
591487 | 500 | 5 | |
591488 | 500 | 10 | |
591489 | 600 | 5 | |
591490 | 600 | 10 | |
591491 | 700 | 5 | |
591492 | 700 | 10 | |
591493 | 800 | 5 | |
591494 | 800 | 10 | |
591495 | 900 | 5 | |
591496 | 900 | 10 | |
591497 | 1000 | 5 | |
591498 | 1000 | 10 |
Teryair Electric Sump Pumps are for permanent or portableapplication and ideal for loading anywhere there is anaccumulation of water.
IMPA Code | Teryair Part No. | Lift Capacity | Discharge Dia. | Voltage | Brochure | Manual |
591621A | ESP 05 | 10-15 mtr | 50 mm | 100V, Single Phase | ||
591626A | ESP 10 | 1015 mtr | 50 mm | 200V, Single Phase | ||
591630A | ESP 30 | 10-15 mtr | 50 mm | 380V, Three Phase |
Teryair Pneumatic Drilling machine is capable of drilling 23mm in steel. It features a feed screw mechanism that enables the drill to be fed into the job with accuracy and minimum operator effort. Because of its light weight, it is the preferred tool for on site drilling application where the job is too heavy or impractical to move. This drill is used extensively by refineries, shipyards, offshore platforms, general engineering and fabrication shops.
IMPA Code | Teryair Part No. | Drilling Capacity (mm) | Free Speed (RPM) | Air Inlet (PT) | Air Hose (mm) | Weight (Kg) | Brochure | Manual |
590351 | DRL300 | 22.0 | 300 | 3/8 | 12.7 | 5.8 | ||
590352 | DRL225 | 32.0 | 225 | 1/2 | 12.7 | 14.0 |
The Teryair Mucking Winch is a pneumatically driven winch specially designed for tank cleaning purposes. It has a Galvanised non spinning cable and a non sparking safety hook. It has a folding design, powerful air motor and worm gear box control handle, all designed for easy operation.
IMPA No. | Teryair Part No. | Lifting Capacity (Kg) | Lifting Speed (Mtr/Min) | Wire Rope | Air Hose Dia. (mm) | Brochure | Manual | |
Dia. (mm) | Length (mm) | |||||||
590603 | MCW 100 | 100 | 30 | 4 | 33 | 15 | ||
590605 | MCW 200 | 200 | 30 | 5 | 40 | 12 | ||
590607 | MCW 300 | 300 | 30 | 5 | 40 | 12 |
Teryair Pneumatic Vacuum Cleaners are ideal for quick andefficient cleaning of work spaces. They can operate on dryor wet debris. They automatically shut off when the drum isfull. They are light weight andmaneuverable.
IMPA Code |
Teryair Part No. |
Hose | Suction Nozzle |
Suction capacity at 5kgf/cm2 |
Brochure | Manual |
590722 | KLIN 50 | Ø32mm x 2m (Oil resisting) | Ø32mm W14mm 2 types available |
2 m3 |
Teryair Water Driven Turbine Fans are designed for highperformance ventilation of gas from large enclosed areas orother tank openings. Works effectively providingpenetration deep into the tank for complete ventilation.These fans are made of non-spark construction with a lineimpeller and integral water motor that are coated against corrosion.
IMPA Code |
Teryair Part No. |
Outlet Bore Dia. |
Capacity (m3/min) |
Water Pressure |
Water Consumption |
Hose Dia | Brochure | Manual |
591436 | WTF-300 | 300 mm | 70 – 220 | 1 – 7 Kgf/cm2 | 20 – 43 m3/hr | 50A | ||
591437 | WTF-400 | 400 mm | 100 – 290 | 1 – 7 Kgf/cm2 | 24 – 58 m3/hr | 50A |
Teryair Pneumatic Drum Pumps are ideally suited fortransferring light oils from barrels. They can be directlyinserted into a barrel and screwed onto the bung bymeans of the provided adaptor. They can be inserted intomost barrels and operate over a range of air inletpressures.
IMPA Code | Teryair Part No. | Weight | Tube Dia. | Air Inlet Connector |
Fluid Outlet Connector |
Brochure | Manual |
591653 | BP 10 | 5.3 Kg | 55 mm | Rc 1/4″ | Rc 3/4″ |
Teryair PX1Punching Table set is ideal for quicklypunching holes in gaskets.It is light weight and easy to handle. It can be easily used on any workbench. The punches are hardened and can beeasily re-ground to retain their cutting edges.
IMPA Code | Teryair Part No. | Hole Size | Contents | Brochure | Manual |
613056 | PX – 1 | 6 -38 mm | 16 Pcs Punching Dies (6,7,8,9,10,11,12,13,16,19,22,25, 28,32,35,38) 1 Pc Punching Table |
Teryair Non Spark Shovel has a sturdy construction and it is quite good for heavy duty sludging. The blade size is 8 x 11, made from brass and it is riveted on to a wooden stem. As the blade is made from soft material, it will not remove protective layers from metal surfaces.
IMPA No. | Part No. | Blade Size | Overall Length | Brochure |
615952 | AS3 | 250 mm x 300 mm | 1000 mm |
Flexible Extension Hoses are used for hand lever grease guns only for hydraulic grease lubrication.
IMPA Code/Teryair Part No. | Grease Nipple Type | Male Thread | Length (mm) | Brochure |
617680 | Pin Type | PT 1/8 | 360 | |
617681 | Button Head Type | PT 1/8 | 370 |
Teryair Valve Seat Cutter is ideal for resurfacing of the valve seat surfaces on most types of valves.Cutters have cutting edges on both sides one side being slant and the other flat. Cutters are made from special High speed Steel for cutting.
IMPA Code Teryair Part No | Thickness (mm) | Kgs Per Sht | Brochure |
671901 | 0.4 | 1.558 | |
671902 | 0.5 | 1.947 | |
671903 | 0.6 | 2.336 | |
671904 | 0.7 | 2.726 | |
671905 | 0.8 | 3.115 | |
671906 | 1.0 | 3.8994 | |
671907 | 1.2 | 4.673 | |
671908 | 1.4 | 5.453 | |
671909 | 1.5 | 5.843 | |
671910 | 1.6 | 6.228 | |
671911 | 1.8 | 7.008 | |
671912 | 2.0 | 7.788 | |
671913 | 2.3 | 8.957 | |
671914 | 2.6 | 10.12 | |
671915 | 2.9 | 11.29 | |
671916 | 3.2 | 12.46 | |
671917 | 4 | 15.58 | |
671918 | 5 | 19.47 | |
671919 | 6 | 23.36 | |
671920 | 7 | 27.26 | |
671921 | 8 | 31.15 | |
671922 | 10 | 38.94 | |
671951 | 0.5 | 8.89 | |
671952 | 0.6 | 10.67 | |
671953 | 0.7 | 12.45 | |
671954 | 0.8 | 14.22 | |
671955 | 1.0 | 17.78 | |
671956 | 1.2 | 21.34 | |
671957 | 1.4 | 24.90 | |
671958 | 1.5 | 26.68 | |
671959 | 1.6 | 28.44 | |
671960 | 1.8 | 32.0 | |
671961 | 2.0 | 35.56 | |
671962 | 2.3 | 40.9 | |
671963 | 2.6 | 46.22 | |
671964 | 2.9 | 51.56 | |
671965 | 3.2 | 56.9 | |
671966 | 4.0 | 71.12 | |
671967 | 5.0 | 88.90 | |
671968 | 6.0 | 106.7 | |
671969 | 7.0 | 124.5 | |
671970 | 8.0 | 142.2 | |
671971 | 10 | 177.8 |
Teryair Electric Scaling Machine isexcellent for descalingoperations such as removal of paint, scales, rust, andchemical coatings. It is robust and trolley mounted.Cutters can be quickly changed.
IMPA Code | Teryair Part No. | Voltage | H.P. | kW | No Load Speed (RPM) |
Weight (Kg) |
Brochure | Manual |
591217 | TEFD 75 110V | 110V | 3/4″ | 0.55 | 3700 | 48 | ||
591218 | TEFD 75 220V | 220V | 3/4″ | 0.55 | 3700 | 48 |
Teryair Pneumatic Scaling Machine is excellent fordescaling operations such as removal of paint, scales, rust, and chemical coatings. It is robust and trolley mounted.Cutters can be quickly changed.
IMPA Code | Teryair Part No. | Max. Air Consumption | No Load Speed | Weight | Brochure | Manual |
591251 | TPFD 75 | 0.8 m3/min | 5000 RPM | 40 Kg |
Teryair Reducing Hose Couplings are designed for connecting hoses of differents sizes.
IMPA Code/Teryair Part No. | Coupling Type | Size | ||
Connection | Hose End | Brochure | ||
330891 | Nakajima | |||
330892 | Machino | 2-1/2″ | 1-1/2″ | |
330893 | ANSI Pin |
Teryair offers a wide variety of nozzle connecting tupws with hose couplings. These are available according to several standards. Some common types are shown.
IMPA No | Nom. Size | Spout Dia | Length | Weight | Brochure |
Nakajima Coupling | |||||
330803 | 40 mm | 12 mm | 350 mm | 0.73 Kgs | |
330803a | 50 mm | 16 mm | 450 mm | 0.17 Kgs | |
330804 | 65 mm | 20 mm | 500 mm | 0.77 Kgs | |
ANSIP Coupling | |||||
330806 | 40 mm | 12 mm | 350 mm | 0.71 Kgs | |
330808 | 65 mm | 20 mm | 500 mm | 1.70 Kgs | |
Nakajima Coupling | |||||
330809 | 40 mm | 12 mm | 350 mm | 0.8 Kgs | |
330810 | 50 mm | 16 mm | 370 mm | 0.2 Kgs | |
330811 | 65 mm | 20 mm | 500 mm | 2.0 Kgs |
Teryair Air Powered High Pressure Cleaners are designedfor heavy duty cleaning operations in hazardousenvironments. These Pneumatic High Pressure Cleanersensure safe cleaning of hazardous areas whereinflammable gases andliquids exist. These heavy duty highpressure cleaners are used for removing dirt, salt and rustdeposits from ship decks/floors, paint andgraffiti off walls, oil andgrease off engines.
Built in bypass safety valve
Low speed motor/pump unitNon spark air motorNon corrosive materials are used in the pump, fittingsandpipes3 fully ceramic pistonsBetter seals for longer lifeBuilt in FRL UnitBuilt in mufflerHigh durability due to low speed motor/pump unitChemical Injector
IMPA Code | Teryair Part No. | Air Motor | Motor Speed | Working Pressure | Flow Capacity | Max. Air Consumption | Dimensions | Weight | Brochure | Manual |
590851 | PW 200 | 9.0 HP (6.6KW) | 1500 rpm | 200 bar | 15.0 Ltr/min | 375 m3/hour (220CFM) | L850 x W550 x H900mm | 95 Kg |
Teryair Pneumatic Air Powered Safety lamps are used for lighting in hazardous areas. Continuous output of high quality general illumination is produced in these lamps by providing a suitable air supply. Typical Applications are:
-Coal mining
-Oil and Petrochemical Industries
-Tank Ships & Tank Cleaning & Pipeline Inspection
-Under ground work
-Canalization
IPMA Code | 330637 |
Teryair Part No. | TSL-01 |
Beam Type | Flood Lingt |
Lens | Toughened flass ( 15 mm ) |
Area of Clasification | Zones 1 & 2, gas froup IIA,IIB and IIC |
Ambient Temperature | 20ºC to +40ºc |
Enclosure | Nickel plated brass and gun-metal |
Light source Type | Tungsten Halogen filament bulb |
Volts | 24 volt |
Watts | 250w |
output | 6000Im ( at 24 volt ) |
Air preessure | 4.0-8.0 bar |
Consumption | 0.75m³_/min |
Weight | 12.2Kgs |
Brochure |
Teryair Flange Jacks exert tremendous pressure smoothly and evenly. The flanges are parted quickly and held in place in perfect alignment without damage to flange faces. Sold in 2Pcs/set only.
IMPA Code | Teryair Part No. | For Pipe Size (mm) | ||||
5 Kgf/cm² Cast Iron |
10 Kgf/cm² Cast Iron | 16 Kgf/cm² Cast Iron | 20 Kgf/cm² Cast BroIron | Brochure | ||
615184 | FJ 500 | 50 – 500 | 50 – 500 | 25 – 300 | 20 – 300 | |
615185 | FJ 1000 | 400 – 1200 | 450 – 600 | 300 – 600 | 300 – 600 |
© 2014 - 2018 reserved by Teryair Equipment Pvt. Ltd.
Click to scroll down