Teral-Aerotech Fans Pvt. Ltd

Kasna, Greater Noida, Uttar Pradesh

Industrial fans and blowers fan are primary function is to provide and accommodate a large flow of air or gas to various parts of building or other structure. This is achieved by rotating a number of blades, connected to a hub and shaft, and driven by a motor or turbine. The flow rates of these mechanical fans range from approximately 200 cubic feet (5.7 m3) to 2, 000, 000 cubic feet (57, 000 m3) per minute. A blower is another name for a fan that operates where the resistance to the flow is primarily on the downstream side of the fan.

Many fans and blowers fall under the classifications of Industrial Fans, Industrial Blowers, Industrial Exhausters, Exhaust Blowers, Industrial Cooling Fans, Industrial Exhaust Fans, Industrial Ventilation Fans, Industrial Centrifugal Fans, and Impeller Fans. They are two basic types of industrial fans: Centrifugalblowers fan or Axial flow fan.

To combat the variance in axial flow fan applications, Teral-Aerotechsmanufacturers from a vast array of materials such as:

• Paint Spray Booth Exhaust
• Fume Hood Exhaust.
• Welding Fume Exhaust
• Process cooling and exhaust of machinery and/or systems.
• Personnel Cooling in Hot Work Areas
• Forced Cooling for Kilns
• Exhausting mist and vapor in paper mills or industrial parts washers prior to painting parts
• General ventilation using supply air and make-up air in factories, foundries and warehouses
• Forced Cooling and Exhausting Heat in Steel Mills.

Teral-Aerotechsspecialised in the design and manufacturer of Axial Flow Fan. An axial fan may be a kind of a mechanical device that will increase the pressure of the air flowing through it. The blades of the axial flow fans force air to maneuver parallel to the shaft concerning that the blades rotate. Theaxial flow is axially in and axially out, linearly, thus their name.

Axial Flow Fans are totally different from Centrifugal Fans and Blowers they move the air. Axial Flow Fan or Industrial Axial Fan uses a mechanical device to draw the air into it, and discharge it, the same axial direction. A Centrifugal Blower attracts the air into the water of the blower housing with one in every of seven forms of wheels. The blower attracts the air through the wheel, and discharges it at ninety degrees out through the discharge of the housing. a tool that moves air with a mechanical device is usually as a Fan.

The two most common types of industrial, Axial Flow Fans are Tube Axial Fans (or Ducted Fans) and Panel Fans or Wall Fans. Tube Axial Fans use a propeller, rotating in a round section of duct, which is mounted into ductwork of the same diameter to exhaust hot and/or contaminated air from a process or system. Panel Fans or Wall Fans use a propeller, rotating in a flat panel, which is mounted to a wall to exhaust air from a room or draw air into a room. Other Axial Flow Fans that incorporate the Tube Axial Fan design are Personnel Coolers and Air Circulators.

The two most common types of industrial, Axial Flow Fans are Tube Axial Fans (or Ducted Fans) and Panel Fans or Wall Fans. Tube Axial Fans use a propeller, rotating in a round section of duct, which is mounted into ductwork of the same diameter to exhaust hot and/or contaminated air from a process or system. Panel Fans or Wall Fans use a propeller, rotating in a flat panel, which is mounted to a wall to exhaust air from a room or draw air into a room. Other Axial Flow Fans that incorporate the Tube Axial Fan design are Personnel Coolers and Air Circulators.

• Hot dip galvanised coated mild steel.
• Stainless steel.
• Specialised coatings to suit client specifications.
• Standard range impellers are available in GRP, GRN and Aluminum.
• Mild steel casing with epoxy /enamel painted
• Specialised impellers are available in mild steel and stainless steel construction.

Axial Flow Fan Application

The most common applications for Axial Flow Fans include

• Paint spray booth exhaust
• Fume hood exhaust to exhaust dangerous fumes away from the operator
• Welding fume exhaust in welding booths
• Process cooling and exhaust of machinery and/or systems
• Spot cooling of heat generating equipment such as generators or transformers
• General ventilation using supply air and/or make-up air in factories, warehouses, foundries, garages, laundries and transformer, engine or equipment rooms
• People cooling in hot work areas
• Exhausting heat and cooling of kilns, forges and in steel mills
• Boosting airflow through long ductwork

Axial Flow Fan - Normal

1.An Axial Flow Fan draws the air in and discharges it inthe same axial direction, rotating in a round section, to exhaust hot and / or contaminated air from a process or system. Teral-Aerotech's Axial Flow Fans can be direct driven with the impeller mounted directly on the motor shaft or can be built driven with the impeller mounted on a separate fan shaft and driven by the motor through bells and sheaves. Axial Flow Fans are ideals for moving large volume of air at low pressures. Teral-Aerotech's Axial Flow Fan have adjustable pitch Axial Fans statically and dynamically balanced having wide range of applications in various industries through out the world. Teral-Aerotech manufactures Axial Flow Fans (Counter-Rotating) based on application like Mine Ventilation, Power Plants etc.

2.A complete range of ancillary items are available: wire guards mounting feet matching flanges inlet cones

Our Wide Range Features:

• Fan Size(Dia): 315 mm to 1600 mm
• Flow rates up to 150000 cmh
• Pressures up to 1500 Pa

Teral-Aerotech is the most prominent manufacturer and suppliers of Roof Extractor Fan. This is used on the roof of industrial sectors, for extracting and exhausting contaminated air. It is manufactured using the finest quality materials in accordance with set industry norms. Our clients can avail this Roof Extractor Fan in various specifications as per their needs at low price rate. Teral-Aerotech roof exhaust fans are high efficient aerofoil fan which gave around 10 to 35 % power saving over any of the existing conventional vent type, tube axial, or propeller type fans. Roof Extractor are available in two speeds and the tentative capacities with dimensions

• Fan Size : 500 to 1200 mm
• Flow rates up to 100000 ChM
• pressures up to 600 pa

Find application in extraction of air supply through roofs/ridges in industrial building, factories, power plants, steel plants, foundries etc.