Tempsens Instruments (I) Pvt. Ltd.

Madri, Udaipur, Rajasthan

Tempsens Split Tube Furnace has a horizontally oriented chamber with a furnace body that splits into two halves. Ability to open a furnace facilitates the operator to change the working tube easily and insets vessels like reactors with flanges which is not possible in nonsplit type furnaces. Working tubes can be easily changed to make the furnace work with variety of tube diameters. Optional features allows user to modify working environment to vacuum or particular gas surrounding (inert gas).
Tempsens Split Tube Furnace comes with single heating zone to multiple heating zones that incorporate gradient heating. Tempsens is ISO and CE certified Laboratory & Industrial furnace manufacturers and suppliers.

STANDARD FEATURES :

• Low thermal mass insulation for rapid response rates and maximum thermal efficiency and stability.
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load.
• Thermocouple breaks protection that helps to prevent thermocouple failure run away.
• Power control through Solid state relay or Thyristor unit that provides low noise operation.
• Easy maintenance and operation.
• NABL certified thermocouple.

CAL FAST offers medium temperature range from 50 to 350C. It is a highly stable standard furnace for calibrating thermocouples / RTD.

Key Features:

• Lightweight & portable.
• Accuracy and performance.
• Accredited calibration.

Accessories:

• Software(Optional)
• Operation Manual

CAL FAST BB offers medium temperature range from 50 to 350C. It is a highly stable standered black body calibrator for calibrating non-contact type sensor like pyrometer/IR Thermometers. The temperature of the calibrators is set and controlled by a self tuned PID controller with autometic super fine adjustment. in the double display the actual and set temperature values are soon. The BB cavity diameter is 60 mm with emissivity 0.97

Key Features:

• Lightweight & portable.
• Accuracy and performance.
• Accredited calibration.

Accessories:

• Software(Optional)
• Operation Manual

High-temperature furnaces are another type of laboratory furnace capable of reaching higher temperatures between 1400C up to 1800C. A high temp furnace typically consists of heating elements located on both sides of the heating chamber to ensure good thermal uniformity. Process applications for a high-temperature furnace include sintering of high-temperature materials, glass melting, and high-temperature testing of ceramics, fusion and firing processes, and powder metallurgy processes.
High-temperature furnaces are insulated with fibre material. Furnaces with fibre insulation achieve significantly shorter heating up times because of the low thermal mass.
Tempsens is ISO and CE certified Laboratory & Industrial furnace manufacturers and suppliers. Tempsens provide range general purpose High-Temperature Furnace in three temperature ranges i.e. 1400C, 1600C & 1800C

Standard Features

• Advance refractory interior, used in combination with energy-efficient low thermal mass insulation.
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Equipped with thermocouple break protection that helps to prevent thermocouple failure run away
• An exhaust air outlet at the rear wall of the furnace
• Power control through Solid state relay or Thyristor unit provides low noise operation.

Annealing furnaces are designed for the processing of SS or Copper wire, rod, strand, strip and tube products. These furnaces are ideally suited for copper, copper alloy, nickel, nickel chrome, titanium, stainless steel and refractory metals.

The furnace bottom is constructed as a shuttle, covered with good heat-conducting boards and is being moved trackless with a steering gear. Below the furnace guiding rails are installed for facilitate the running in of the shuttle.
The insulation is according to the application as well as to the maximum temperature and mainly consists of high insulating refractory light bricks. The heating spirals made of MoSi2 heating element or Silicon Carbide heating element or Kanthal A1/APM heating wire on supporting tubes are located in the three walls.

Standard Application

• Annealing
• Stress Relieving
• Hardening and Tempering
• Normalizing
• Post Weld Heat Treatment
• Heat Treatment

CALsys 1200L calibration source is a highly stable standard furnace for calibrating thermocouples in the laboratory. The temperature of the furnace is set and controlled by a self-tuned PID controller with automatic super fine adjustment. The standard insert is a metallic block of special material, which is 37mm in diameter with 240 mm long and can hold up to four thermocouples.
It has been designed for high-temperature range calibration and find application in the glass, electrical power, automotive, material processing industries & laboratories. Special Version with 3 zone furnaces are available.

Key Features:

• Large Immersion Depths
• Wide Operating Range (300 to 1200°C)
• High Stability
• PC interfacing
• Simple to Use and Cost-Effective

Accessories:

• Reference Standard Thermocouple ('N' Type T/C)
• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours of data logging.
• Operational Manual

CALsys 1500L calibration source is a highly stable standard furnace for calibrating thermocouples in the laboratory. The temperature of the furnace is set and controlled by a self-tuned PID controller with automatic super fine adjustment. The standard insert is a Ceramic Tube, which is 37 mm in diameter with 245 mm long and can hold up to four thermocouples.
It has been designed for high-temperature range calibration and find application in the glass, electrical power, automotive & material processing industries and laboratories.

Key Features:

• Use of Silicon Carbide Spiral Rod Heaters
• Large Immersion Depths
• Wide Operating Range (500 to 1500°C)
• High Stability
• PC interfacing
• Simple to Use and Cost-Effective

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual

CALsys 1200BB calibration source is a highly stable standard black body furnace for calibrating noncontact IR thermometer for the wide temperature range of 300 to 1200°C. The unique feature of this black body furnace is large temperature-controlled black body target with a diameter of 40 mm and 85mm which offer large view area for IR thermometer. The emissivity of the target is 0.99(±0.01).The temperature of the calibrator is set and controlled by a self-tuned PID controller with automatic super fine adjustment.

Key Features:

• Wide Operating Range (300 to 1200°C)
• High Stability
• PC interfacing
• Simple to use and cost-effective
• Sighting tube

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual
• Master Pyrometer (Optional)

Muffle Furnace is box type heat treatment equipment used to change physical properties of samples at very high temperature. These laboratory furnaces are widely used in scientific experiments in the physics lab, rice laboratories, steel and paint industries, biotech companies and small industrial production etc.Their major applications include general laboratory testing, annealing, ash determination, coal analysis, leaves carbonization and lime calcination etc. The other applications include Ignition tests, Heat treating steel parts and Gears, Coal sampling, Organic and inorganic ashing, Chemical analysis, soils&aggregates cement Testing, Glass blowing lab, Plastic tensile strength test, Gravimetric analysis, Heat treating Gears, Quench testing, Research facilities in chemistry, Annealingl oss determination, Development of coatings and ceramics, Rice laboratory, Stoneware samples firing etc.

Standard Features

• Maximum operating temperature. 500°C to 1200°C.
• Silicon Carbide Muffle for Energy Efficient and better uniformity.
• Side way sliding door keeps heated surface away from the users.
• Door limit switch for making heating system off while door in open condition.
• Energy Efficient with reduce heat loss by using advanced insulation refractory.
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Equipped with thermocouple break protection that help preventing thermocouple failure run away.
• Exhaust air outlet at rear wall of the furnace.
• Solid state relay provide low noise operation.

CALsys 1700L calibration source is a highly stable standard furnace for calibrating thermocouples in the laboratory. The temperature of the furnace is set and controlled by a self-tuned advanced PID controller with automatic super fine adjustment. The standard insert is a Ceramic Tube, which is 37 mm in diameter and 240 mm long and can hold up to four thermocouples. It has been designed for high-temperature range calibration and find application in the glass, electrical power, automotive & material processing industries and laboratories.

Key Features: It has been designed for high-temperature range calibration and find application in the glass, electrical power, automotive & material processing industries and laboratories.

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual
• Reference Standard Thermocouple (PT-RH/PT 'B' Type T/C) (Optional)
• Extra Equalizing Block

CALsys 1700BB calibration source is a highly stable standard black body furnace for calibrating noncontact IR thermometer for the wide temperature range of 500 to 1700°C. The unique feature of this black body furnace is large temperature-controlled black body target with a diameter of 29 mm which offer a large view area for IR thermometer. The emissivity of the target is 0.97(±0.01). The temperature of the calibrator is set and controlled by a self-tuned PID controller with automatic super fine adjustment.

Key Features:

• Use of Molybdenum Disilicide Heaters (MoSiO2)
• Wide Operating Range (500 to 1700°C)
• High Stability
• PC interfacing
• Simple to use and cost-effective

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual

Tubular furnaces are designed for sample testing under gas/vacuum atmosphere they are available in customize size and options with water-cooled flange. Maximum design temperature of the furnace is up to 1800°C.
The various applications include ageing, annealing, brazing, calcination, catalyst research, CIM, coating, CVD, degassing, drying, hardening, MIM, mini-plants, pyrolysis, sintering, soldering, sublimation, synthesis, tempering, test fuel cells, thermocouple calibrationTempsens is ISO and CE certified Laboratory & Industrial furnace manufacturers and suppliers. Tempsens has wide range of tubular furnaces with different tube sizes and a Temperature range up to 1800 deg C.

Standard Features

• Maximum operating temperature 1800°C
• High Alumina/Quartz ceramic tubes
• Advance refractory interior, used in combination with energy-efficient low thermal mass insulation.
• Multi-Zone temperature control for better uniformity.
• Equipped with thermocouple break protection that help to prevent thermocouple failure run away.
• Power control through Solid state relay or Thyristor unit provides low noise operation.

CALsys 1500BB calibration source is a highly stable standard black body furnace for calibrating noncontact IR thermometers for the wide temperature range of 500 to 1500°C. The unique feature of this black body furnace is large temperature-controlled black body target with a diameter of 40 mm and 85 mm depth which offer large view area for IR thermometer. The emissivity of the target is 0.99(±0.01). The temperature of the calibrator is set and controlled by a self-tuned PID controller with automatic super fine adjustment.

Key Features:

• Use of Silicon Carbide Spiral Rod Heaters
• Wide Operating Range (500 to 1500°C)
• High Stability
• PC interfacing
• Simple to use and cost-effective
• Sighting tube

Accessories:

• NABL accredited calibration certificate - 3 point
• Software - Cal Soft including for setting bath temperature and monitoring the PV. Graphical representations of PV/TIME with 2 hours data logging.
• Operational Manual

Dental Furnace is a bottom loading type heat treatment equipment used to change the physical properties of samples at very high temperatures. These laboratory furnaces are widely used in scientific experiments in dental laboratories. Its major applications are in sintering translucent zirconia and dental ceramics operations. This furnace provides the following advantages: easy loading and removal of samples like molten glass, dental zirconia, etc. furnace uses an electrically operated elevator hearth, which as it rises into the furnace chamber, lifts the load into the heated zone.

Standard Features

• Max Operating temperature 1100°C
• Bottom loading type furnace
• Multiple Programmable PLC automatic controllers
• Display LED display
• Easy operation and maintenance
• Outstanding temperature uniformity inside the chamber

Microwave furnaces represent a system that combines free radiating heating elements with a microwaves field. Key advantages include greater energy efficiency, faster sample heating, more uniform heating and improves material properties.

Bottom loading furnaces are designed for uniform thermal distribution inside the chamber, easy loading and unloading of the sample with help of lifting arrangement. Bottom loading furnaces are ideal to achieve a variety of heating-cooling cycles without sacrificing temperature uniformity or product quality. These furnaces are well suited for calcining, firing and sintering oxide ceramic parts (i.e., alumina, zirconia), technical ceramics, co-fired substrate materials, capacitors, filters, thermistors, ferrites.
The high-temperature bottom loading furnace sare additionally equipped with a drying as well as a forced cooling function. For residual drying, the oven remains open gapwise during heating up to a defined temperature and thus ensures reliable removal of moisture. For accelerated cooling, the furnace is automatically opened step by step under program control.