Tempo Instruments Private Limited

Mira Road, Mumbai, Maharashtra

“TEMPO” make Silicon Heating Tapes are ready to use, wrap around flexible heating elements for heating cylindrical vessels, pipes etc. can be easily installed, removed and used again.

• Max operation Temperature 180°C
• Silicone Rubber Outer Cover
• Moisture Resistant construction.
• Lead Wires on one end
• Spiral Heating Element design to give better temperature uniformity.
• Robust & Flexible Element.
• Lower Watt Density, enhancing longer life through better distribution of heat. (Lower watts per cm of wire)
• 25mm wide tapes may be easily applied to diameters as small as 12mm.
• Temperature controller system (Digital /Thermostatic) can be provided for display, monitoring and safe operation.

“TEMPO” make Heating Tapes are ready to use, wrap around flexible heating elements for heating cylindrical vessels, pipes etc. can be easily installed, removed and used again.

• Lead Wires on one end
• Spiral Heating Element design to give better temperature uniformity.
• Heavy Braided Fibre Glass Outer Cover.
• Robust & Flexible Element.
• Lower Watt Density, enhancing longer life through better distribution of heat. (Lower watts per cm of wire)
• 25mm wide tapes may be easily applied todiameters as small as 12mm.
• Temperature controller system (Digital /Thermostatic) can be provided for display, monitoring and safe operation.

When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

ConstructionDouble walled constructed PUF modular panels ensure easy assembly at site. The leak proof door with a full gasket and airtight mechanical lock ensures there is no leakage through the chamber. The observation window (30 × 30 cm) is provided for viewing the sample inside the chamber. The unit is provided with perforated stainless steel trays.

Technical Specification

• Air Circulation : The motorized blower at the backside of the chamber provides the recirculation of air which ensure the maximum uniformity of temperature and humidity inside the chamber should be maintained.
• Heating System : The high quality SS tubular heater made from the nichrome wire sheathed in SS tube is used. The special arrangement of heaters avoids the direct rendition of stored samples.
• Humidity System : High-quality U shape S.S. tubular heater is used for better heating.
• Humidity System : Steam injection system with water level arrangement is provided. A low pressure boiler tank and reservoir tank with duly argon welded is fitted with a float valve. When the water level in the tank is low the switch cut off. The ISI marked heating elements are used with the inbuilt stand by humidity system with auto change over the facility.
• Refrigeration System : The CFC Free hermetically sealed Emerson Copeland make compressor is used for better cooling with eco friendly refrigerant. The cooling system is made up of split type and the compressor is coupled with the condenser unit in a well ventilated area to avoid the hot air throw inside the chamber.
• Control System : The microprocessor based PLC (logging capacity of 1000 readings) with HMI touch screen 4.3″ colour display, which gives the direct display, the process value and the set value of temperature and humidity inside the chamber. The sensor (transmitter type 4-20 ma) which will accurately measure the temperature and humidity is provided with a high speed ethernet communication. The internal working area is illuminated.

FeaturesThe sturdy design and long lasting finish ensure the minimum maintenance is required. The tongue and the grooves are moulded to close tolerance ensuring there is a tight fit between the panels. These prevent the condensation from forming on the foam a which minimizes the heat transfer. The high quality hardware like hinges and handles used in panels are indigenous and are imported.

Safety Features

• Audio visual alarms are used for temperature and humidity variations.
• If the temperature increases above the 60°C the system will automatically cut off the dry heater, wet heater and the compressor.
• The float switch is used to cut off the wet heater supply in case of the water level in the tank goes below.

Optional Features

• CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
• Data logger
• CFR 21 part 11 compliance software for data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system

Muffle Furnace is designed for R&D labs, Educational institutions , Medicine and Industry, Chemical Industries, Plastic Industry, Moulding Industry, Glass Industry, Rubber Industry, Ceramics Industry, Biomedical Industry, Paint Industry, Textile Materials, Pharma Industry, Dental Labs, Thermal Process Technology, Advanced Materials for following applications, Testing, Analysing, Ashing, Drying, Sintering, Annealing, Melting, Tempering, Hardening, Dental Porcelain, and Crystalizing etc.

• Temperature range 1700C max
• Supply Single phase/three phase

Features

1. Maximum operating temperature range up to 1700C.
2. Dimensions from 1 up to 200 litres.
3. Rugged and durable construction.
4. The outer casing is made up of thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life withextremely resistant.
5. Multiplayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
6. Parallel guided swing aside door design.
7. Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 on both sides providing a fast heating rate.
8. Fast heat up and cool down rates.
9. Temperature uniformity +/- 5C.
10. Temperature control with PID controllers.
11. Power control with solid-state relays or Thyristor units for very precise temperature Control, wear-free and noiseless.
12. High mechanical durability, short heating cycle and low power consumption.

Optional Features

1. Over Temperature/Over Current Limiter
2. Touchscreen temperature controller
3. Port for additional thermocouple.
4. Process observation window.
5. Chimney for forced air extraction.
6. Additional ceramic/SiC bottom plate.
7. Buzzer, Digital timer, Emergency shut down.
8. Data Recorder.
9. RS232/RS485/USB interface.
10. Calibration of temperature measurement systems.
11. Gas purging facility Table for supporting the systems.
12. Data Acquisition System (DAS) through software.
13. UPS Systems.
14. Customization as per user requirement.
15. Caster wheels with brakes.
16. Door safety switch.

“TEMPO” make laminar airflow cabinets are a series of high efficiency clean room workbenches designed to protect equipment and other contents of the work zone from particulates.
In a vertical laminar airflow cabinet, filtered air blows on the work zone and leaves through the holes in the base of three sides SS 304 covered sheet. As compared to horizontal type, vertical flow cabinet can provide greater operator protection.

Application

• Plant tissue culture
• Media plate preparation
• Electronic inspection
• Media device assembly
• Pharmacy drug preparation
• General lab work
• Semiconductor industry
• Aeronautics industry

Construction Motor System

• Backward curved centrifugal fans
• Low noise

Filter System

• Pre filter efficiency EU-5 rating – Efficiency: 95% down to 5 micron
• HEPA filter efficiency Eu-13rating (99.997% down to 0.3 microns)

Material of Construction

• Inner SS 304 Table & outer GI powder coated
• Inner SS 316 table & outer  SS 304 Matt finish features

Features

• In build LCD controller with a display of airflow speed and life of UV light and HEPA filter
• Audiovisual alarm for filter blockage
• Flange type prefilter of 5-micron capacity
• Miniplate box type HEPA filter of 99.99%
• Backward curved centrifugal fans with  less noise and vibration
• High efficiency UV lamp comes with strong germicidal powder and disinfects the area
• Static pressure is measured by Magnehlic guage
• In built timer for UV and HEPA filter

Optional Features

• Provision for gas  valve
• Provision for water valve.

Advantages

• Inbuilt timer for UV light
• Specialised sound absorbers material to reduce the noise
• Facility to reduce the speed to the authorised person
• Audiovisual alarm for filter blockage
• Provision of electrical socket

“TEMPO” make fume hood is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapours or dust. Air is drawn from lab space into the fume hood then dispersed via a pipe to the outside atmosphere. Basically, it protects the user from inhaling toxic gases.

Application

• Chemical lab
• Food manufacturer
• Drugs manufacturer company
• Paint manufacturing company
• Rubber industry
• Polymer industry
• Cement industry

Construction

Exhaust system

• Centrifugal blower with anti coregent coating
• Low noise blower

Material of construction

• Double wall construction
• Inner body PP and outer body MS powder coated
• Inner body fibre and outer body MS powder coated
• Smooth black granite table

Features

• Electrical socket
• Thich toughen glass window
• Vertical opening Sash
• Fluorescent lamp
• Centrifugal blower with Anti coregent coating

Optional Features

• Tap for gas
• Tap for water
• Sink for water
• Castor wheels
• Storage cabinet at bottom
• PVC ducting pipe

“TEMPO” make a tray dryer are with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air which ensures a homogeneous hot air mixture and an exact temperature profile.

Standard Models

• Inside mild steel with silver heat resistant paint and outer mild steel with Hammerton paint.
• Inside SS 304 mirror finish and outer mild steel with Hammerton paint.

GMP Models

• Inside SS 304 with mirror polish & outer stainless steel 304 with a matt finish.
• Inside SS 316 with mirror polish & outer stainless steel 304 with a matt finish.

ConstructionDouble walls are constructed on heavy angles. All sides of the ovens are insulated with 7.5 cm thick glass wool insulation to minimize ski temperature. The panels are designed in such a way that the inner and outer wall contact to minimize the heat losses through conduction.

Technical Specification

• Controlling System : Microprocessors based autotune PID temperature controller with & dual display of set value & process value for precise control of temperature with PT 100 sensor is used for temperature.
• Heating System : SS tubular heating elements used on the side walls to maintain a uniform temperature condition inside the chamber.
• Air Circulation : The motorized blower fitted on the top side of the chamber develop unique airflow system which ensures maximum temperature distribution inside the temperature. The unique airflow assures that there is a quick recovery after the doors are opened.

FeaturesDouble walled two doors provided with silicon gasket at front side, heavy duty hinges and ball latch locking system.

Safety FeaturesSafety standby thermostat cuts off the heater supply in case of overshoot of temperature.

Optional Features

• CFR 21 part 11 compliance software for data logger
• Data logger
• Data scanner complete with sensor
• Safety digital temperature controller
• Timer

“TEMPO” make soxhlet extraction heaters are designed to use in laboratories for solvent extraction under reflux. Typical applications are the determination of residual oil content in oil cake, assay of crude herbal drug sources etc.

Construction“TEMPO” make soxhlet extraction heaters is suitable to heat soxhlet flasks of 100-350 ml capacity. The heating element is attached to knitted fabric to provide flexible support to the bottom of the flask. Glass wool insulation fills the gap between the metal casing and the heater. In event of spillage, the solvent will either evaporate or escape through the draining hole below each element. The housing has two retort rods and a cross bar on which the extraction apparatus is fixed. The apparatus has an inbuild energy regulator which controls all the heaters. The heating elements have individual ON/OFF switch and pilot lamp to indicate working.

Technical Specification

• Controlling System : Energy regulator and pilot lamp
• Heating System : The heating element is attached to knitted fabric to provide flexible support to the bottom of the flask. Glass wool insulation fills the gap between the metal casing & the heater.

“TEMPO” drum heaters provide an easy, efficient, clean and economical way for the handling of viscous of low melting point solidified materials in drums. Such materials include asphalt, bitumen, fats, gelatin, glucose, grease, lubricating oils, paints, petroleum jelly, phenols, plastics, sodium tar, vanaspati oil, varnishes & waxes etc.
“TEMPO” drum heaters are mobile ovens heated by “Tempanel” flexible surface electric heating elements operating at a black heat. They are the mode in rugged designs and stand normal usage in chemical industries. They can be used for heating the contents of drums kept in the vertical or horizontal positions. The contents will be heated at a rate depending on the size of the drum and its contents. The contents may either be melted completely and removed as a liquid or they may be melted only at the surface touching the drum walls and removed as a slid block by lifting the drum. The heating in “TEMPO” drum heaters in gentle and uniform and there is no chance of local overheating. Automatic temperature control is provided as standard equipment, except in the base and top heaters in which it is not required.

Construction

• Base Heater : The base heater for drums in the vertical position & is suitable for use with type TI-129 B drum heater.
• Vertical Drum Heater : TI-129 B is a vertical drum heater in two sections hinged to each other, forming a cylindrical heater when closed. It is fitted with castor wheels. The standard model can take a standard size drum of 45 gallons capacity.
• Heating System : The heating in “TEMPO” make drum heaters are gentle and uniform and there is no chance of local overheating.

Static pass box equipment is made of high-grade stainless steel (304/316) with international quality standard components including electrically interlocked. This pass box is designed to minimize traffic and contamination entry into the clean room. Enables parts, tools and other items to be passed to and from the room. This pass box unit acts as an airlock device preventing ambient air from entering or clean air from exiting from the clean room.

Features

• High-grade stainless steel construction
• Precision designing and finish
• Electrical interlocked
• Floor and wall-mounted design
• Buzzer indication to know the material is kept inside.
• Maximum chemical resistance construction.
• UV light along with the hour meter.
• LED light
• Indicating lamp to know the door lock and unlock condition
• Toughen glass window
• LCD display

Dynamic pass box equipment made of powder-coated high-grade stainless steel (304/316) with international quality standard components including electrically interlocked doors and UV light. These dynamic pass box equipment are equipped with a prefilter of 5 microns and box type HEPA filter of 99.99% to 0.3 microns.

Features

• High-grade stainless steel construction
• Cleanliness ISO CLASS 100
• Low noise level
• Precision designing and finish
• Electrical interlocked
• Floor and wall mounted design
• Buzzer indication to know the material is kept inside
• Maximum chemical resistance construction
• Interlocked between UV light and LED light
• UV light along with hour meter
• Indicating lamp to know the door lock unlock condition
• Toughen glass window
• LCD display

TEMPOmake laminar airflow cabinets are a series of high efficiency clean room workbenches designed to protect equipment and other contents of the work zone from particulates.

In a vertical laminar airflow cabinet, filtered air blows on the work zone and leaves through the holes in the base of three sides SS 304 covered sheet. As compared to horizontal type, vertical flow cabinet can provide greater operator protection.

Application

1. Plant tissue culture
2. Media plate preparation
3. Electronic inspection
4. Media device assembly
5. Pharmacy drug preparation
6. General lab work
7. Semiconductor industry
8. Aeronautics industry

1. Backward curved centrifugal fans
2. Low noise

1. Pre filter efficiency EU-5 rating Efficiency: 95% down to 5 micron
2. HEPA filter efficiency Eu-13rating (99.997% down to 0.3 microns)

1. Inner SS 304 Table & outer GI powder coated
2. Inner SS 316 table & outer SS 304 Matt finish features

1. In build LCD controller with a display of airflow speed and life of UV light and HEPA filter
2. Audiovisual alarm for filter blockage
3. Flange type prefilter of 5-micron capacity
4. Miniplate box type HEPA filter of 99.99%
5. Backward curved centrifugal fans with less noise and vibration
6. High efficiency UV lamp comes with strong germicidal powder and disinfects the area
7. Static pressure is measured by Magnehlic guage
8. In built timer for UV and HEPA filter

1. Provision for gas valve
2. Provision for water valve

Silicon Heating Cord(100°C)

• Safe for use with metal and electrically conductive surfaces.
• Widely used in deep freezer , refrigerators etc
• Temperature controller system (Digital / Thermostatic) can be provided for display, monitoring and safe operation

“TEMPO” make heating cords are flexible allow making heating elements in any shape for heating fractionation columns, glassware or just about any the vessel in the laboratory or pilot plant.

• Heating cords are used when heating tapes are too bulky or cumbersome
• Ideal for laboratory, R&D, gas tubing, production,   aintenance, temporary heat, and more…
• These 6 mm diameter cords solve a wide range of limited-space heating applications in
• laboratory, production, or Industrial applications.
• Rapid thermal response.
• Temperature controller system (Digital / Thermostatic) can be provided for display, monitoring and safe operation.

The DaVinci self refilling syringe line offers precision instruments you can rely upon. Intended for safe and reliable liquid distribution, the selection comes in a range of volumes. One-year warranty.
The DaVinci syringe is an excellent solution for the accurate delivery of repetitive fixed doses without any errors during use. This self refilling syringe is most effective when worked in the laboratory. The Comfortable Grip and ergonomic design ensure fatigue-free working during serial precision dosing. The fast and reliable volume selection ensures highly accurate dosing. The robust construction makes it easily autoclavable.

Applications

• Reagent distribution
• Hot Agar
• Sterile work
• Filling of well plates
• HPLC vial preparation
• Small batch injection vials

DaVinci Vial Holder Set  71 SeriesThe DaVinci vial self refilling syringe is another liquid feeding model consists of a vial holder, integrated vented needle, locking ring and bottle lock, this ‘Vial Holder’ model is used to draw liquid out of the original liquid manufacturer’s vial. The vial holder body is at an optimal angle. The locking ring on the vial ensures the vial does not get disengaged from the vial holder body. The integrated vented needle ensure smooth operation of the dosing. The detachable slant vial holder body fits standard vials. The safety locking nut ensures reliable and highly accurate repetitive pre-fixed dose dispensing.

DaVinci Vial Holder Set – 71 Series – UtilityThe vial holder set – utility is another variation in the VHS series. It is fixed with a 50ml PP reservoir fits onto the 2-way valve to ensure dosage administration of the desired liquid irrespective of the liquid’s original container packing.

TEMPO make COD digester outer cabinet made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. An aluminium block with holes (dimension 40 mm dia x 80 mm depth) is used to hold COD tubes. The aluminium block is heated to maintain the temperature up to 180°C.

Features

• Superior finish.
• Long-lasting
• Customized options
• Exceptional quality

Optional Features

• OCOD Tubes (38 mm dia)
• Air condenser
• Stand for all condenser
• Stand for sample COD tubes
• SS bath

TEMPO Magnetic Stirrers with Aluminium top housing are most compact models. Permanent Magnet DC (PMDC) motor gives high torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Different models available for all types of laboratory stirring applications up to 5 liters. Accurate stepless speed control with digital display allows smooth variation up to 1200 rpm. Heat energy is controlled by energy regulator.

“TEMPO” make ultrasonic baths have been specifically designed & fabricated to removes micro dust, clot, and bloodstains from different kinds of machines and instruments. The clients can get these cleaners from us at different specifications.

Standard Models

• Inside SS 304 with mirror polish & outside mild steel powder coated.

GMP Models

• Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Construction

• “TEMPO” make Ultrasonic bath is double walled construction with inner SS argon welded one piece pot which avoids leakages.

Technical Specification

Controlling System

• Digital temperature controller cum indicator with PT – 100 sensor. (available from 4.5 litres onwards).

Timer

• Digital Timer   : 0 minutes – 20 minutes for 1 litre to 3 litres
• : 0 – 99 minutes for 4.5 litres capacity onwards

Transducer

• Imported PZT sandwich type bonded at the bottom of the tank.

Features

• High frequency built in MOSEFT based SMPS.
• Fully Stainless Steel body.
• Top mounted removable lid with a basket (no lid in 1 litre capacity)
• Drain system with ball valve (available for 4.5 litres capacity onward)

“TEMPO” make hot plates are widely used in various industries such as automobile, chemical, pharmaceuticals and others. Available in various specifications.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Constructionmake Hot Plates are constructed with thick gauge mild steel well machined & smooth cast iron top. This cast iron is grooved from bottom to circulate spiral heaters.

Technical Specification

• Controlling System : Energy regulator/thermostatic controller.
• Heating System : Heating elements are housed into grooves with porcelain beads underneath of the cast iron.

Features

• Grooved cast iron top with the best quality for uniform heating.
• Suits very high corrosive atmosphere & ensured long-life performance.

Safety Features

• Thermostat to cut off supply in case of temperature overshoot.

Introducing Disposable Westergren E.S.R Pipettes, designed for precise measurement of erythrocyte sedimentation rate (ESR) from 0 to 180mm. Crafted from high-quality polystyrene, these pipettes ensure accurate readings and reliable results. With their disposable nature, they eliminate the need for cleaning and cross-contamination concerns, making them a hygienic choice for medical laboratories and healthcare facilities. Streamline your ESR testing process with these convenient and user-friendly pipettes. Meticulously calibrated for optimal performance, they offer a seamless solution for efficient and accurate ESR analysis. Enhance your diagnostic capabilities with these essential tools and deliver reliable results every time. How to Use: 1. Preparation: o Gather all necessary materials and equipment, including the ESR pipette, blood sample, Westergren stand, and anticoagulant (usually sodium citrate). 2. Blood Sample Collection: o Collect the blood sample using standard phlebotomy techniques. o Mix 4 parts blood with 1 part sodium citrate solution. 3. Filling the Pipette: o Insert the pipette into the mixed blood sample. o Allow the blood to rise to the zero mark on the pipette through capillary action. o Ensure there are no air bubbles in the sample within the pipette. 4. Sealing: o Secure the silicon plug at the top of the pipette to prevent leakage. 5. Positioning: o Place the filled and sealed pipette vertically in the Westergren stand. o Ensure the pipette is stable and not tilted. 6. Reading the Result: o Allow the pipette to stand undisturbed for the required time, typically 1 hour. o After the specified time, read the level of settled erythrocytes (red blood cells) at the top of the sediment column. o Record the ESR value in millimeters (mm). 7. Disposal: o After use, dispose of the pipette in accordance with local biohazard waste disposal regulations.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Construction“TEMPO” make cement curing tank is made of sturdy construction with stainless steel inner chamber and galvanised iron sheet exterior duly powder coated with epoxy paint. The chamber is suitably insulated. The sample holder baskets/trays are designed keeping in mind the difficulties the user faces with sample handling. The construction is complete with provision for water inlet and drain valve.

Controlling SystemTemperature is controlled by means of microprocessor based PID controller cum indicator. Refrigeration is achieved by means of hermetically sealed compressor system of Emerson Copeland make with CFC free refrigerant. A circulation pump of suitable output is provided in order to maintain a uniform temperature throughout the chamber. Best quality stainless steel corrosion resistant heaters are used.

When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

ConstructionLight weight sandwich panel. Double walled construction with backside triple wall. 3″ thick PUF insulation ensures stable temperature with a reduction in energy consumption. The motorized blower at the backside of the chamber for recirculation of air to develop a unique airflow system which ensures maximum uniform temperature condition inside the chamber. The unique airflow assures quick recovery after door openings.
Single-phase, TEFC, F class insulation 1440 rpm, 230V. HIgh-quality SS tubular heaters are used for better heating. Steam injection system and reservoir tank with water level arrangement with indicator.

Technical Specification

• Control System : Microprocessor based PLC (up to 5000 readings) with 7″ touch screen colour HMI, which gives the direct display of process value and set the value of temperature and humidity inside the chamber. High speed ethernet based communication.
• Refrigeration System : The refrigeration is provided by means of CFC free hermetically sealed Emerson Copland compressor for better cooling with eco-friendly refrigerant.  The cooling system is made up of split type so as one can place the compressor coupled with condenser unit in a well ventilated area to avoid hot air throw in the stability room. The inbuilt stand by refrigeration system is provided with auto change over the facility.

Features

• Negligible maintenance – the sturdy design and long lasting finish ensures minimum maintenance for years.
• Minimal heat transfer – the tongue and groove edges of all panels are moulded to close tolerance ensuring a tight fit between panels. These prevent condensation from forming on the foam and minimize heat transfer.
• Quality accessories – hardware like hinges, handles etc. on panels from best indigenous suppliers.

Optional Features

• CFR 21 part 11 compliance software
• Standby refrigeration and humidity system
• Ethernet communication
• Door access system
• Data logger/scanner
• Touch screen HMI
• PLC-based control
• Email alert
• Mobile alert system
• Safety alarms

When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

ConstructionDouble walled constructed PUF modular panels ensure easy assembly at site. The leak proof door with a full gasket and airtight mechanical lock ensures there is no leakage through the chamber. The observation window (30 × 30 cm) is provided for viewing the sample inside the chamber. The unit is provided with perforated stainless steel trays.

Technical Specification

• Air Circulation : The motorized blower at the backside of the chamber provides the recirculation of air which ensure the maximum uniformity of temperature and humidity inside the chamber should be maintained.
• Heating System : The high quality SS tubular heater made from the nichrome wire sheathed in SS tube is used. The special arrangement of heaters avoids the direct rendition of stored samples.
• Humidity System : High-quality U shape S.S. tubular heater is used for better heating.
• Humidity System : Steam injection system with water level arrangement is provided. A low pressure boiler tank and reservoir tank with duly argon welded is fitted with a float valve. When the water level in the tank is low the switch cut off. The ISI marked heating elements are used with the inbuilt stand by humidity system with auto change over the facility.
• Refrigeration System : The CFC Free hermetically sealed Emerson Copeland make compressor is used for better cooling with eco friendly refrigerant. The cooling system is made up of split type and the compressor is coupled with the condenser unit in a well ventilated area to avoid the hot air throw inside the chamber.
• Control System : The microprocessor based PLC (logging capacity of 1000 readings) with HMI touch screen 4.3″ colour display, which gives the direct display, the process value and the set value of temperature and humidity inside the chamber. The sensor (transmitter type 4-20 ma) which will accurately measure the temperature and humidity is provided with a high speed ethernet communication. The internal working area is illuminated.

FeaturesThe sturdy design and long lasting finish ensure the minimum maintenance is required. The tongue and the grooves are moulded to close tolerance ensuring there is a tight fit between the panels. These prevent the condensation from forming on the foam a which minimizes the heat transfer. The high quality hardware like hinges and handles used in panels are indigenous and are imported.

Safety Features

• Audio visual alarms are used for temperature and humidity variations.
• If the temperature increases above the 60°C the system will automatically cut off the dry heater, wet heater and the compressor.
• The float switch is used to cut off the wet heater supply in case of the water level in the tank goes below.

Optional Features

• CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
• Data logger
• CFR 21 part 11 compliance software for data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system

When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

ConstructionDouble walled constructed PUF modular panels ensure easy assembly at site. The leak proof door with a full gasket and airtight mechanical lock ensures there is no leakage through the chamber. The observation window (30 × 30 cm) is provided for viewing the sample inside the chamber. The unit is provided with perforated stainless steel trays.

Technical Specification

• Air Circulation : The motorized blower at the backside of the chamber provides the recirculation of air which ensure the maximum uniformity of temperature and humidity inside the chamber should be maintained.
• Heating System : The high quality SS tubular heater made from the nichrome wire sheathed in SS tube is used. The special arrangement of heaters avoids the direct rendition of stored samples.
• Humidity System : High-quality U shape S.S. tubular heater is used for better heating.
• Humidity System : Steam injection system with water level arrangement is provided. A low pressure boiler tank and reservoir tank with duly argon welded is fitted with a float valve. When the water level in the tank is low the switch cut off. The ISI marked heating elements are used with the inbuilt stand by humidity system with auto change over the facility.
• Refrigeration System : The CFC Free hermetically sealed Emerson Copeland make compressor is used for better cooling with eco friendly refrigerant. The cooling system is made up of split type and the compressor is coupled with the condenser unit in a well ventilated area to avoid the hot air throw inside the chamber.
• Control System : The microprocessor based PLC (logging capacity of 1000 readings) with HMI touch screen 4.3″ colour display, which gives the direct display, the process value and the set value of temperature and humidity inside the chamber. The sensor (transmitter type 4-20 ma) which will accurately measure the temperature and humidity is provided with a high speed ethernet communication. The internal working area is illuminated.

FeaturesThe sturdy design and long lasting finish ensure the minimum maintenance is required. The tongue and the grooves are moulded to close tolerance ensuring there is a tight fit between the panels. These prevent the condensation from forming on the foam a which minimizes the heat transfer. The high quality hardware like hinges and handles used in panels are indigenous and are imported.

Safety Features

• Audio visual alarms are used for temperature and humidity variations.
• If the temperature increases above the 60°C the system will automatically cut off the dry heater, wet heater and the compressor.
• The float switch is used to cut off the wet heater supply in case of the water level in the tank goes below.

Optional Features

• CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
• Data logger
• CFR 21 part 11 compliance software for data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system

The ‘CORTO’ Glass Syringe Pump is a Repetitive dispenser for fluid transfer that facilitates repeatable dosage distribution. The System offers a user-friendly design for the fluid transfer – without the capital investment required for filling pumps. The device is for use with a wide variety of reservoirs, including vials, syringes, oral medication containers. Also used for drug dosage distribution and reconstitution in hospital pharmacies.
CORTO’ Glass Syringe Pipettors, have contoured finger rings and thumb rest that allows effortless non-fatiguing one-handed operation.
These features provide for self-refilling, allowing continuous pipetting from a single liquid reservoir. The pipettors are easily assembled.  All units are autoclavable and are ideal for use with sterile media during aseptic techniques.

• Simple screw adjustment for accurate volume setting.
• Automatic return of spring-loaded plunger to preset volume for quick repeat dispensing.
• Convenient finger-holds for effortless single-hand operation.
• Filling assembly attachment enables continuous refilling from the reservoir and repetitive delivery of preset volumes.
• The unique design of stainless steel bivalve and sinker ensures smooth, leakproof liquid transfer.
• Simple Natural Movements
• Plunger Tightness without ‘O’ Ring
• Volume Selection
• Low Maintenance

Unlimited Applications:

• Dose-by-dose distribution,
• Dispensing distribution,
• Sterile Work, Filtration
• Animal Injection

Laboratory Reusable Needles – Pipetting & HypodermicPipetting needles are available in the following choices in laboratory procedures. All needles are made with type 304 stainless steel cannulae and are 90° blunt end needles. Needles are fitted with standard nickel-plated Luer hubs. These needles are used in conjunction with both manual and automatic volumetric dispensers, dilution, and pipettors.
Special Needles Available On request

• A variety including standard hypodermic needle, veterinary needles, laboratory needles, blunt needles, animal research also available on request.
• Requirements with Specific gauges, lengths and types available on request including Stainless Steel hubs used during special applications and working with corrosive materials or critical procedures.
• Kindly enquire with us today for your special needles and we shall be glad to cater them to you.

“TEMPO” make lab clean is a carefully enclosed machine which is a unique filter combination that filters our air and gas contaminants thus by giving most clean air. The air is drawn through the prefilter, carbo filter and HEPA filter and blown clean air in the room.

“TEMPO” make TI – 128HT series ovens are made of triple-walled construction. The motorized blower with V-belt fitted on the top side of the chamber for re-circulation of air to maintain the uniformity of temperature inside the chamber. The unit is insulated with 4” high grade glass wool. Single door fitted on heavy hinges. The unit is provided with user friendly adjustable stainless steel rod mesh trays.

Standard Models

• Inside SS 304 with mirror polish & outside mild steel powder coated.

GMP Models

• Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Construction

• “TEMPO” make TI – 128HT series ovens are made of triple walled construction. The motorized blower with V-Belt fitted on the top side of the chamber for re-circulation of air to maintain the uniformity of temperature inside the chamber. The unit is insulated with 4” high grade glass wool. Single door fitted on heavy hinges. The unit is provided with user friendly adjustable stainless steel rod mesh trays.

Technical Specification

Controlling System

• Two separate imported microprocessors based autotune PID controller with CE mark & dual display of set value & process value for control pf temperature.

Air Circulation

• The motorized blower with V belt drives on the top side of the chamber develops unique airflow distribution inside the chamber.

Heating System

• High quality U shape S.S. tubular heating elements are used on the side walls to maintain uniform conditions inside the chamber.

Features

• The single door is fitted on the heavy hinges with a ceramic gasket to avoid heat loss. The specially designed stainless steel wire mesh/rod trays ensure uniform temperature distribution.

Safety Features

• The safety digital temperature controller to cut off the heater supply in case of overshoot of temperature and give audio alarm.

Optional Features

• CFR 21 part 11 compliance software for data logger
• Stand by refrigeration and humidity system
• Data scanner complete with sensor
• Timer

“TEMPO” make TI – 128HT series ovens are made of triple-walled construction. The motorized blower with V-belt fitted on the top side of the chamber for re-circulation of air to maintain the uniformity of temperature inside the chamber. The unit is insulated with 4” high grade glass wool. Single door fitted on heavy hinges. The unit is provided with user friendly adjustable stainless steel rod mesh trays.

Standard Models

• Inside SS 304 with mirror polish & outside mild steel powder coated.

GMP Models

• Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Construction

• “TEMPO” make TI – 128HT series ovens are made of triple walled construction. The motorized blower with V-Belt fitted on the top side of the chamber for re-circulation of air to maintain the uniformity of temperature inside the chamber. The unit is insulated with 4” high grade glass wool. The door is fitted on the heavy hinges.

Technical Specification

Controlling System

• Two separate imported microprocessors based autotune PID controller with CE mark & dual display of set value & process value for precise control of temperature.

Air Circulation

The motorized blower with a V belt drive on the top side of the chamber develops the unique airflow distribution inside the chamber. The unique airflow system ensures quick recovery after the doors are opened.

Heating System

• High-quality U shape SS tubular heating elements used on the side walls to maintain uniform condition inside the chamber.

Features

• The door is fitted on the heavy hinges with a ceramic gasket to avoid the losses. The specially designed stainless steel wire mesh/rod trays ensure uniform temperature distribution.

Safety Features

Safety digital temperature controller switch off the heater supply in case of temperature overshoot and creates an audio alarm.

Optional Features

• CFR 21 part 11 compliance software for data logger
• Data logger
• Data scanner complete with sensor
• Timer

Lab Drying Oven

“TEMPO” make lab drying TI 126 series ovens with forced air draft provided by means of blower fitted at the bottom of the oven. There is no recirculation of air.

Standard Models

• Inside SS 304 with mirror polish & outside mild steel powder coated.

GMP Models

• Inside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Construction

• Ovens are made of double walled construction. The unit is insulated with 3” thick high grade glass wool insulation. The single door is fitted on heavy duty hinges. The unit is provided user friendly adjustable stainless steel rod trays.

Technical Specification

Controlling System

• Microprocessors based autotune PID temperature controller with a dual display of set value & process value for precise control of temperature with PT 100 sensor is used for temperature.

Air Circulation

• Forced air draft is provided by means of blower fitted at the bottom of the oven (there is no recirculation of air).

Heating System

• Heating element made from the best quality Kanthal wire are used on refractory supports.

Features

• Additional safety thermostat to cut off heater supply in case temperature of overshoot. The single door fitted on heavy hinges. Specially designed stainless steel rod trays to ensure uniform temperature distribution.

Optional Features

• CFR 21 part 11 compliance software for data logger
• Data logger
• Data scanner complete with sensor
• Safety digital temperature controller
• Timer

“TEMPO” make glass door refrigerators are stable and reliable with the refrigerated environment for exact laboratory requirements. Lab refrigerators are used for maintaining storage conditions of a product, to prevent its exposure to low temperature applications, where the temperature requirements are on the lower side. Ideal temperature environment for clinical research, pharmaceutical and industrial use. Adjustable shelves and wide range set point for varying laboratory applications including chromatography and pharmaceutical storage. The application includes refrigerated storage of vaccines, reagents, cultures, medicines and blood samples.

Standard ModelsInside SS 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

Construction“TEMPO” make glass door refrigerators are made of double walled and triple at backside construction. Front door multi glass fitted in mild steel powder coated or SS 304 with full-length magnetic gasket for proper sealing with lock and key. Full view inner acrylic door. The motorized blower is fitted on the back side for uniform temperature even under loaded conditions. 3” thick PUF insulation. The unit is provided with adjustable stainless steel rod trays. The equipment is mounted on caster wheels for easy movement.

Technical Specification

• Controlling System : Microprocessor based auto tune PID temperature controller with a dual display of set value & process value for precise control of temperature.
• Sensor : PT 100 sensor is used for temperature & electronic type sensor for humidity.
• Heating System : High quality SS tubular heaters are used for better heating.
• Refrigeration System : CFC Free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (Eco Friendly) refrigerant with a time delay to safeguard compressor system.

Features

• Full view observation acrylic door with a gasket to observe the sample inside the chamber. Interior illumination for working area.
• Specially designed stainless steel rod trays ensure uniform temperature distribution.

Safety Features

• Safety standby thermostat to cut off heater supply in case of overshoot of temperature.
• Safety audio visual alarms for temperature overshoot & undershoot.
• Compressor ON delay timer (2 min) to safe guard the compressor.

Optional Features

• PLC for auto change over for standby refrigeration system
• CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
• Stand by refrigeration
• Data logger
• CFR 21 part 11 compliance software for data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system
• Safety digital temperature controller
• Timer

Features

• Maximum operating temperature range up to 1800°C
• Dimensions from 1 up to 64 litres.
• Compact design for minimum space requirement.
• Rugged and durable Construction.
• Outer casing is made up thick mild steel with duly powder coated or thick buffed stainless steel, gives long service life with extremely resistant.
• Multilayer insulation with vacuum formed ceramic fibre or refractory bricks with low thermal mass.
• Reliable vibration free bottom lifting with electro-mechanical movement
• Prepared to carry heavy charge weight.
• Hot raising by hydraulic.
• Furnace design with powerful heating elements i.e. FeCrAl, SiC and MoSi2 installed in four walls of the chamber
• providing fast heating rate and excellent temperature uniformity.
• Fast heat up and cool down rates.
• Temperature uniformity +/- 5°C.
• Temperature control with PID controllers.
• Power control with solid state relays or Thyristor units
• for very precise temperature Control, wear-free and noiseless.
• High mechanical durability, short heating cycle and low power consumption.

Optional Features

• Over Temperature/Over Current Limiter.
• Touchscreen temperature controller.
• Port for additional thermocouple on top or rear wall of the furnace.
• Buzzer, Digital timer, Emergency shut down.
• Data Recorder.
• RS232/RS485/USB interface.
• Calibration of temperature measurement systems.
• Table/Stand for supporting the systems.
• Data Acquisition System (DAS) through software.
• UPS Systems.
• Customization as per user requirement.
• Caster wheels with brakes.
• Door safety switch.

Application

• Raising Hearth Furnace is designed for R&D labs, Educational institutions, Medicine and Industry, Thermal Process Technology, Dental Labs, Advanced Materials for following applications- Drying, Hardening, Annealing, Brazing, Sintering, Research, Heat treatment, Dental crowns and frameworks etc.

These Tapes are recommended for use on non-conductive surfaces such as glass or ceramic. (Not recommended for Conductive surfaces such as metal etc)
“TEMPO” make Heating Tapes are ready to use, wrap around flexible heating elements for heating cylindrical vessels, pipes etc. can be easily installed, removed and used again.

• Lead Wires on one end
• Spiral Heating Element design to give better temperature uniformity.
• Robust & Flexible Element.
• Lower Watt Density, enhancing longer life through better distribution of heat. (Lower watts per cm of wire)
• 25mm wide tapes may be easily applied to diameters as small as 12mm.
• Temperature controller system (Digital /Thermostatic) can be provided for display, monitoring and safe operation.

“TEMPO” make deep freezer are designed to provide an ideal freezing environment for advanced medical and industrial applications and also suitable for research laboratories, blood bank, biological use includes preservation of plasma, blood components, vaccines, etc.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

ConstructionDouble walled construction. 3” Thick PUF Insulation ensures stable temperature with reduced energy consumption.

Technical Specification

• Temperature Control : Temperature is controlled by means of imported microprocessor based autotuned PID controller with CE mark & dual display of set value & process value.
• Refrigeration System : Refrigeration by means of CFC free hermetically sealed Emerson Copland make compressor with R 134A for better cooling. Full view observation Glass/Acrylic door with a gasket to observe the sample inside the chamber. Specially designed stainless steel rod trays ensure uniform temperature distribution.

FeaturesFull view observation Acrylic door with a gasket to observe the sample inside the chamber. Specially designed stainless steel rod trays ensure uniform temperature distribution.

Safety FeaturesInbuilt overload protector provided for the hermetically sealed compressor.

Optional Features

• PLC for auto change over for standby refrigeration system with HMI
• CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
• Stand by refrigeration and humidity system
• Data logger
• CFR 21 part 11 compliance software for data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system
• Safety digital temperature controller
• Timer

“TEMPO” make deep freezer are designed to provide an ideal freezing environment for advanced medical and industrial applications and also suitable for Research Laboratories, Blood Bank, Biological Use includes preservation of plasma, blood components, vaccines, etc. These units are available in horizontal/vertical versions.

Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.

ConstructionDouble walled construction 3” thick PUF insulation ensures stable temperature with reduced energy consumption.

Technical Specification

• Temperature Control  : Temperature is controlled by means of imported microprocessor based autotuned PID controller with CE mark & dual display of set value & process value.
• Refrigeration System : By means of CFC free hermetically sealed Emerson Copeland make compressor for better cooling with R 404 A (eco-friendly) refrigerant with a time delay to safeguard compressor system. Full view observation Acrylic door to observe sample inside the chamber. Specially designed stainless steel rod trays ensure uniform temperature distribution.

FeaturesPUF insulated inner door with gasket. Specially designed stainless steel rod trays ensure uniform temperature distribution.

Safety FeaturesCompressor ON delay timer to safe guard the compressor.

Optional Features

• PLC for auto change over for standby refrigeration system with HMI
• CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication
• Stand by refrigeration and humidity system
• Data logger
• CFR 21 part 11 compliance software for data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system
• Safety digital temperature controller
• Timer

“TEMPO” lab refrigerator is made of double walled construction with thick high grade PUF insulation. Full view inner acrylic door & front door with gasket & locking arrangement. The motorized blower at the backside of the chamber develops a unique airflow system to maintain uniform temperature condition inside the chamber. Unique airflow assures quick recovery after door openings. The unit is provided with a user friendly adjustable specially designed S.S rod trays, ensures uniform temperature distribution. The equipment is mounted on castor wheels for easy movement.

Standard ModelsInside S.S. 304 with mirror polish & Outside mild steel powder coated.

GMP ModelsInside S.S. 316 with mirror polish & Outside stainless steel 304 with the dull buff finish.

ConstructionLab refrigerator is made of double walled construction with thick high grade PUF insulation. Full view inner acrylic door & front door with gasket & locking arrangement. The motorized blower at the backside of the chamber develops a unique air ow system to maintain uniform temperature condition inside the chamber. Unique air ow assures quick recovery after door openings. The unit is provided with a user friendly adjustable specially designed S.S rod trays, ensures uniform temperature distribution. The equipment is mounted on castor wheels for easy movement.

Technical Specification

• Controlling System : By means of imported microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value.
• Sensor : PT 100 sensor is used for sensing the temperature.
• Heating System : High quality S.S. tubular heaters are used for better heating.
• Refrigeration System : CFC free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (eco-riendly) refrigerant with a time delay to safeguard compressor system.
• Validation Port : 50 mm validation porthole with silicon rubber seal to insert sensor for validation

FeaturesFull view observation Acrylic door with a gasket to observe the sample inside the chamber. Interior illumination for working area. Specially designed stainless steel rod trays ensure uniform temperature distribution.

Safety FeaturesSafety standby thermostat to cut off heater supply in case of overshoot of temperature. Inbuilt overload protector provided for the hermetically sealed compressor. Compressor ON delay timer (2 min) to safeguard the compressor.

Optional Features

• PLC based control system
• Stand by the refrigeration system
• Ethernet / RS485 communication
• Data logger
• Data scanner complete with sensor
• SMS mobile alert system
• Door access security system
• Safety digital temperature controller
• Digital timer
• CFR 21 part 11 compliance software

This apparatus is an ideal instrument to check the sealing integrity of the blister packs, strip packs, sachet and pouch packs etc. It is also used for checking leaks from capped bottles, induction sealed containers, sealed or crimped containers etc. The leak test apparatus in a stainless steel body with phenomenal compactness. The instrument is equipped with a long-lasting vacuum pump, which gives a higher level of vacuum in the shortest possible time. Die pressed polycarbonate vacuum desiccator sustain vacuum for a long time.

Application

• Drugs manufacture (Blisters and small sachets containing tablets)
• Pain manufacturer
• Food manufacture (Sugar, spices, granulates)
• Bislery water bottle manufacturing

Features

• The very low noise level
• Polycarbonate vacuum desiccator sustains vacuum for a long time.
• Stainless steel 304 construction
• Built-in vacuum and isolating valve.
• Stable digital timer for auto stop
• Vacuum level up to 550 mm of Hg
• Audio alarm after completion of software