To cater to the variegated demands of the customers, we are offering our premium range of Fluid Bed Dryer. Because of the use of high-grade components, the Fluid Bed Dryer is suitable for pharmaceutical products, dyes, foodstuff, etc. We are an illustrious Manufacturer and Supplier of Fluid Bed Dryer from Chennai, Tamil Nadu and known for our fair pricing policy.

 Fluidized bed drying is the optimal method for controlled, gentle and even drying of wet solids. The intensive heat/mass exchange of the fluidized bed product makes this method particularly effective and time-saving. The technology is also suitable for post-drying of spray granulated or extruded products with very low residual moisture. Fluid bed dryers are most suitable for drying granules, crystalline, coarse or similar material in pharmaceuticals, fine chemicals, dyes, foodstuff and allied industries.

Features :

• In compliance with CGMP guidelines
• Uniform Drying with reducing Drying time
• Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
• Enhanced heat and mass transfer through intimate contact and mixing with the fluidizing gas.
• Heat sensitive materials can be dried at temperatures lower than the boiling point due to reduced vapor pressure.
• Indirect heat transfer surfaces can be added to increase capacity or reduce bed area .
• Closed cycle Fluid Bed systems, in which inert gases can be recycled, are available to handle toxic products, oxygen sensitive products, or flammable solvent wetted materials.
• Atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns to prevent any fine dust to pass through the product.
• Steam Coil made out of 1" dia. SS 304/316 finned tube & is designed to get pressure of around 3-4 kg/cm² (working pressure 3 kg/cm².
• Digital temperature indicators cum controller is provided with the unit to indicate the inlet and outlet air temperature as well as to controller the present inlet air temperature.
• Air suction and discharge dampers provided to control the inlet and outlet air flow.
• An explosion safety flap of adequate capacity at the rear end of the dryer
• Timer provided to set the process time which will cut off the motor supply after pre-set time period
• Physical properties of the material can be restored due to gentle vibrations

Models : Capacity 30 Kg – 500 Kg

Our company is a distinguished Manufacturer and Supplier of Atmospheric Tray Dryer based in Chennai, Tamil Nadu. Fitted with a control panel, the Tray Dryer is essential for the process of heating and drying for various pharmaceutical products. We ensure customer satisfaction by checking the Atmospheric Tray Dryer on stringent quality parameters before approving it for delivery. 

A tray Dryer is an enclosed insulated chamber in which trays are placed on top of each other in trolleys. Tray Dryer are used where heating and drying are essential parts of manufacturing process in industries such as Chemicals, Dye stuff, Pharmaceutical, Food Products etc. The material to be dried either wet or solids are placed in the trays. Heat transfer takes place by circulation of hot air by electric heaters or steam in radiator coils. Blower fans are installed inside to ensure proper circulation and transfer of heat. A control panel to control the temperature and other parameters is fixed outside the dryer.

Features :

• All contact parts made of SS 316 as PGMP standard
• Design for uniform circulation of hot air in the drying chamber
• Heating cold and fan motor having electrical inter locking for safety of heating elements
• Electric/Steam/Thermic Fluid heating system
• Fresh air inlet and outlet air flow can be adjusted with damper control valve
• Trays in SS316
• Trolley and Steam coil in SS316
• Silicon Door Gasket
• FLP Motor and Electricals
• Digital Temperature Indicator(FLP)
• 10 Micron Air Filter at inlet
• Adjustable Air outlet Damper
• Explosion vent for safety

Model :  6, 12,   24, 36, 48, 96, 192 Trays

To cater to the variegated demands of the customers, we are offering our premium range of Fluid Bed Dryer. Because of the use of high-grade components, the Fluid Bed Dryer is suitable for pharmaceutical products, dyes, foodstuff, etc. We are an illustrious Manufacturer and Supplier of Fluid Bed Dryer from Chennai, Tamil Nadu and known for our fair pricing policy.

 Fluidized bed drying is the optimal method for controlled, gentle and even drying of wet solids. The intensive heat/mass exchange of the fluidized bed product makes this method particularly effective and time-saving. The technology is also suitable for post-drying of spray granulated or extruded products with very low residual moisture. Fluid bed dryers are most suitable for drying granules, crystalline, coarse or similar material in pharmaceuticals, fine chemicals, dyes, foodstuff and allied industries.

Features :

• In compliance with CGMP guidelines
• Uniform Drying with reducing Drying time
• Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
• Enhanced heat and mass transfer through intimate contact and mixing with the fluidizing gas.
• Heat sensitive materials can be dried at temperatures lower than the boiling point due to reduced vapor pressure.
• Indirect heat transfer surfaces can be added to increase capacity or reduce bed area .
• Closed cycle Fluid Bed systems, in which inert gases can be recycled, are available to handle toxic products, oxygen sensitive products, or flammable solvent wetted materials.
• Atmospheric inlet air is filtered by means of single / multi stage filters of 20 microns to prevent any fine dust to pass through the product.
• Steam Coil made out of 1" dia. SS 304/316 finned tube & is designed to get pressure of around 3-4 kg/cm² (working pressure 3 kg/cm².
• Digital temperature indicators cum controller is provided with the unit to indicate the inlet and outlet air temperature as well as to controller the present inlet air temperature.
• Air suction and discharge dampers provided to control the inlet and outlet air flow.
• An explosion safety flap of adequate capacity at the rear end of the dryer
• Timer provided to set the process time which will cut off the motor supply after pre-set time period
• Physical properties of the material can be restored due to gentle vibrations

Models : Capacity 30 Kg – 500 Kg

Our company is a distinguished Manufacturer and Supplier of Atmospheric Tray Dryer based in Chennai, Tamil Nadu. Fitted with a control panel, the Tray Dryer is essential for the process of heating and drying for various pharmaceutical products. We ensure customer satisfaction by checking the Atmospheric Tray Dryer on stringent quality parameters before approving it for delivery. 

A tray Dryer is an enclosed insulated chamber in which trays are placed on top of each other in trolleys. Tray Dryer are used where heating and drying are essential parts of manufacturing process in industries such as Chemicals, Dye stuff, Pharmaceutical, Food Products etc. The material to be dried either wet or solids are placed in the trays. Heat transfer takes place by circulation of hot air by electric heaters or steam in radiator coils. Blower fans are installed inside to ensure proper circulation and transfer of heat. A control panel to control the temperature and other parameters is fixed outside the dryer.

Features :

• All contact parts made of SS 316 as PGMP standard
• Design for uniform circulation of hot air in the drying chamber
• Heating cold and fan motor having electrical inter locking for safety of heating elements
• Electric/Steam/Thermic Fluid heating system
• Fresh air inlet and outlet air flow can be adjusted with damper control valve
• Trays in SS316
• Trolley and Steam coil in SS316
• Silicon Door Gasket
• FLP Motor and Electricals
• Digital Temperature Indicator(FLP)
• 10 Micron Air Filter at inlet
• Adjustable Air outlet Damper
• Explosion vent for safety

Model :  6, 12,   24, 36, 48, 96, 192 Trays