The Horizontal Rectangular Autoclave that we deal in comes with single door and radial locking system. Here, you will get even the bulk orders of Horizontal Rectangular Autoclave without letting your wallets know. We are a celebrated Manufacturer and Supplier of Horizontal Rectangular Autoclave from Tamil Nadu, India.

Horizontal Rectangular Autoclave with ISI (BIS 3829) Part I Marked

• Inner Chamber : SS 316
• Steam Jacket : SS 304
• Working pressure : 1.2kg/cm² & 2.1kg/cm²
• Working Temperature : 121C / 134C
• Door : Single door with Radial locking system
• Mode of control : With a multiport valve / Automatic Optional
• Pre-vacuum and Post vacuum : To eliminate air packs and ensure effective sterilization.
• Water protection : In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
• Pressure switch : An automatic pressure switch adjustable type is provided to set the required pressure.
• Vacuum drying : An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass : To note down the level of water glass tube with gauge is provided.
• Gasket : Silicon Expansion type

Instrumentation :

• Safety Valve
• Vacuum Breaker
• Non-Return Valve
• Steam Trap
• Water inlet and Water outlet valves.

Sequence of Automatic operation includes the following ;

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will displayed and data logged.
• Bowie- dik test
• Spore-test results from approved lab submitted
• Pulsing ( vacuuming, purging and pre-heating)
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with vacuum pump.
• Final cooling with admission of filtered air (0.01 Micron)
• Sterilization completes with F.O values Displayed and datas logged.
• CGmp Documentation (DQ, IQ, OQ and PQ) will be supplied

Optional :

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle Suitable SS Trolley and SS Carriage
• Data Logging System
• Double Door System
• Vertical/Horizontal Sliding door
• Pulsing Controller

Rectangular Autoclave Steam steriliser Manufacturer are you looking for Rectangular Autoclave Steam steriliser Dealers In Chennai we are the Best Rectangular Autoclave Steam steriliser Supplier, Super Heated Water Spray Autoclave.

We have carved a niche for ourselves as a dependable Manufacturer and Supplier of Vertical Autoclave from Tamil Nadu, India. We make use of premium stainless steel for their production in order to make it in accordance with the stated international quality standards. It is resistant to corrosion and assures longer service life.

Vertical Autoclave with ISI (BIS 3829) Part III Marking :

• Chamber - SS 316
• Jacket - SS 304
• Insulation cover - SS304
• Voltage - 220V / 440V
• Working Temperature - 121C / 134C
• Working Pressure - 1.2kg/cm² & 2.1kg/cm²
• Door - SS Door Wing Nut/ Radial Locking
• Door Gasket - Silicon Epochal Type
• Mode of Control - Manual / Automatic (Optional)
• Safety Features - Low Water Protection Device, Automatic Pressure / Switch, Safety Valves

Features :

• Storing steam in the steam jacket for next consecutive cycle.
• Powerful ejector which creates partial vacuum upto 10 HG. Mercury.
• Separate gauge for jacket and chamber.
• Temperature reading Thermometer.
• Automatic low - water protection.
• Automatic pressure switch.

Construction :Triple walled construction unlike the other model the main working chamber is welded to the steam jacket with end ring so that steam is stored in the steam jacket for next consecutive cycle. The working chamber is made of the S.S. Plate to withstand high pressure in the steam jacket. Water is stored in the steam jacket with water level gauge and water inlet and water outlet valve. There is a separate valve for injecting steam to the inner chamber.

Instrumentation :

• Pressure Gauge for Jacket
• Compound Gauge for Chamber
• Safety Valve
• Thermometer to read inner.
• Pressure Switch
• Water Inlet Valve & Water Outlet Valve
• Water Level Gauge
• Ejector Valve

Optional :

• Fully Automatic Micro processor based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle.
• Selector switch for regular and high speed .

Acquire Reactor Autoclave at nominal prices from us! We are a distinguished Manufacturer and Supplier of Reactor Autoclave from Tamil Nadu, India. The Reactor Autoclave is extensively used for high pressure reactions and gas-liquid reactions. It is designed and fabricated using superior quality stainless steel that is resistant to corrosion.

 

Autoclave Salient Features

• Sizes from 50 ml to 50 litre
• Material of Construction – SS316, SS316 L, Hastelloy C, Zirconium, Inconel, Monel etc.,
• Standard design pressure upto 100 bar & design temperature upto 250^°C.
• Maximum design pressure upto 350 bar & temperature upto 600^°C.
• Accessories – Flameproof Control Panel, Auto Cooling System, Digital Pressure Indicator, Safety Relief Valve, Flameproof IIC Motor, SS Ball Valve with funnel for solid/liquid inlet, Reflux condenser, chain pulley arrangement etc.,
• Skid Mounted Hydro generator pilot plant.

Autoclave Advantages

• High Mass transfer area
• Faster reaction
• Shorter batch time
• Lesser catalyst loading
• Minimum Impurities
• High Yields
• Better Product Economy

Autoclave Applications

• For various high pressure reactions and gas-liquid reactions with
• Hydrogen
• Ethlyene Oxide
• Ammonia
• Oxygen
• HCL
• Phosgene
• CO2
• CO
• In R & D Labs of fine & specialty chemicals, bulk drug manufacturers, agrochemicals, petrochemicals companies and chemical / chemistry departments of educational institutes / Universities etc.

Located in Tamil Nadu, India, we are actively functioning as a Manufacturer and Supplier of Horizontal Cylindrical Autoclave all over the nation. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for their development. Feel completely free to place the order!

 

Horizontal Cylindrical Autoclave with ISI (BIS 3829) Part I Marking

• Inner Chamber : SS 316
• Steam Jacket : SS 304
• Working pressure : 1.2kg/cm² & 2.1kg/cm²
• Working Temperature : 121^°C / 134^°C
• Door : Single door with Radial locking system
• Mode of control : With a multiport valve / Automatic Optional
• Pre-vacuum and post vacuum : To eliminate air packs and ensure effective sterilization.
• Water protection : In the event of low water the supply to the heaters is  discontinued automatically and visually indicated in the control panel.
• Pressure switch : An automatic pressure switch adjustable type is provided to  set the required pressure.
• Vacuum drying : An  effective  vacuum drying is caused with powerful ejector and vacuum breaker which draws  air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass : To note down the level of water glass tube with gauge is provided.
• Gasket : Silicon Expansion type

Instrumentation

• Safety Valve
• Vacuum Breaker
• Non Return Valve
• Steam Trap
• Water inlet and Water outlet Valves

Supply Voltage : 440 volts – 3 phase 

Sequence of Automatic operation includes the following :

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will displayed and data logged.
• Bowie-dik test
• Spore-test results from approved lab  submitted
• Pulsing (vacuuming, purging and pre-heating)_ Optional
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with vacuum pump. – Optional
•  Final cooling with admission of filtered  air (0.2 Micron)
• Sterilization completes with F.O values Displayed and data’s logged

Optional :

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
• Data Logging System
• Double Door System
• Pulsing Controller

The Horizontal Rectangular Autoclave that we deal in comes with single door and radial locking system. Here, you will get even the bulk orders of Horizontal Rectangular Autoclave without letting your wallets know. We are a celebrated Manufacturer and Supplier of Horizontal Rectangular Autoclave from Tamil Nadu, India.

Horizontal Rectangular Autoclave with ISI (BIS 3829) Part I Marked

• Inner Chamber : SS 316
• Steam Jacket : SS 304
• Working pressure : 1.2kg/cm² & 2.1kg/cm²
• Working Temperature : 121C / 134C
• Door : Single door with Radial locking system
• Mode of control : With a multiport valve / Automatic Optional
• Pre-vacuum and Post vacuum : To eliminate air packs and ensure effective sterilization.
• Water protection : In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
• Pressure switch : An automatic pressure switch adjustable type is provided to set the required pressure.
• Vacuum drying : An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass : To note down the level of water glass tube with gauge is provided.
• Gasket : Silicon Expansion type

Instrumentation :

• Safety Valve
• Vacuum Breaker
• Non-Return Valve
• Steam Trap
• Water inlet and Water outlet valves.

Sequence of Automatic operation includes the following ;

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will displayed and data logged.
• Bowie- dik test
• Spore-test results from approved lab submitted
• Pulsing ( vacuuming, purging and pre-heating)
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with vacuum pump.
• Final cooling with admission of filtered air (0.01 Micron)
• Sterilization completes with F.O values Displayed and datas logged.
• CGmp Documentation (DQ, IQ, OQ and PQ) will be supplied

Optional :

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle Suitable SS Trolley and SS Carriage
• Data Logging System
• Double Door System
• Vertical/Horizontal Sliding door
• Pulsing Controller

Rectangular Autoclave Steam steriliser Manufacturer are you looking for Rectangular Autoclave Steam steriliser Dealers In Chennai we are the Best Rectangular Autoclave Steam steriliser Supplier, Super Heated Water Spray Autoclave.

We have carved a niche for ourselves as a dependable Manufacturer and Supplier of Vertical Autoclave from Tamil Nadu, India. We make use of premium stainless steel for their production in order to make it in accordance with the stated international quality standards. It is resistant to corrosion and assures longer service life.

Vertical Autoclave with ISI (BIS 3829) Part III Marking :

• Chamber - SS 316
• Jacket - SS 304
• Insulation cover - SS304
• Voltage - 220V / 440V
• Working Temperature - 121C / 134C
• Working Pressure - 1.2kg/cm² & 2.1kg/cm²
• Door - SS Door Wing Nut/ Radial Locking
• Door Gasket - Silicon Epochal Type
• Mode of Control - Manual / Automatic (Optional)
• Safety Features - Low Water Protection Device, Automatic Pressure / Switch, Safety Valves

Features :

• Storing steam in the steam jacket for next consecutive cycle.
• Powerful ejector which creates partial vacuum upto 10 HG. Mercury.
• Separate gauge for jacket and chamber.
• Temperature reading Thermometer.
• Automatic low - water protection.
• Automatic pressure switch.

Construction :Triple walled construction unlike the other model the main working chamber is welded to the steam jacket with end ring so that steam is stored in the steam jacket for next consecutive cycle. The working chamber is made of the S.S. Plate to withstand high pressure in the steam jacket. Water is stored in the steam jacket with water level gauge and water inlet and water outlet valve. There is a separate valve for injecting steam to the inner chamber.

Instrumentation :

• Pressure Gauge for Jacket
• Compound Gauge for Chamber
• Safety Valve
• Thermometer to read inner.
• Pressure Switch
• Water Inlet Valve & Water Outlet Valve
• Water Level Gauge
• Ejector Valve

Optional :

• Fully Automatic Micro processor based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle.
• Selector switch for regular and high speed .

Acquire Reactor Autoclave at nominal prices from us! We are a distinguished Manufacturer and Supplier of Reactor Autoclave from Tamil Nadu, India. The Reactor Autoclave is extensively used for high pressure reactions and gas-liquid reactions. It is designed and fabricated using superior quality stainless steel that is resistant to corrosion.

 

Autoclave Salient Features

• Sizes from 50 ml to 50 litre
• Material of Construction – SS316, SS316 L, Hastelloy C, Zirconium, Inconel, Monel etc.,
• Standard design pressure upto 100 bar & design temperature upto 250^°C.
• Maximum design pressure upto 350 bar & temperature upto 600^°C.
• Accessories – Flameproof Control Panel, Auto Cooling System, Digital Pressure Indicator, Safety Relief Valve, Flameproof IIC Motor, SS Ball Valve with funnel for solid/liquid inlet, Reflux condenser, chain pulley arrangement etc.,
• Skid Mounted Hydro generator pilot plant.

Autoclave Advantages

• High Mass transfer area
• Faster reaction
• Shorter batch time
• Lesser catalyst loading
• Minimum Impurities
• High Yields
• Better Product Economy

Autoclave Applications

• For various high pressure reactions and gas-liquid reactions with
• Hydrogen
• Ethlyene Oxide
• Ammonia
• Oxygen
• HCL
• Phosgene
• CO2
• CO
• In R & D Labs of fine & specialty chemicals, bulk drug manufacturers, agrochemicals, petrochemicals companies and chemical / chemistry departments of educational institutes / Universities etc.

Located in Tamil Nadu, India, we are actively functioning as a Manufacturer and Supplier of Horizontal Cylindrical Autoclave all over the nation. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for their development. Feel completely free to place the order!

 

Horizontal Cylindrical Autoclave with ISI (BIS 3829) Part I Marking

• Inner Chamber : SS 316
• Steam Jacket : SS 304
• Working pressure : 1.2kg/cm² & 2.1kg/cm²
• Working Temperature : 121^°C / 134^°C
• Door : Single door with Radial locking system
• Mode of control : With a multiport valve / Automatic Optional
• Pre-vacuum and post vacuum : To eliminate air packs and ensure effective sterilization.
• Water protection : In the event of low water the supply to the heaters is  discontinued automatically and visually indicated in the control panel.
• Pressure switch : An automatic pressure switch adjustable type is provided to  set the required pressure.
• Vacuum drying : An  effective  vacuum drying is caused with powerful ejector and vacuum breaker which draws  air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass : To note down the level of water glass tube with gauge is provided.
• Gasket : Silicon Expansion type

Instrumentation

• Safety Valve
• Vacuum Breaker
• Non Return Valve
• Steam Trap
• Water inlet and Water outlet Valves

Supply Voltage : 440 volts – 3 phase 

Sequence of Automatic operation includes the following :

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will displayed and data logged.
• Bowie-dik test
• Spore-test results from approved lab  submitted
• Pulsing (vacuuming, purging and pre-heating)_ Optional
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with vacuum pump. – Optional
•  Final cooling with admission of filtered  air (0.2 Micron)
• Sterilization completes with F.O values Displayed and data’s logged

Optional :

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
• Data Logging System
• Double Door System
• Pulsing Controller