Our Products
Electric & Electronic Active Devices
2 Products availableManpower Service
1 Products availableAuto Lighting Parts
1 Products availableLenses
1 Products availableNuts Bolts And Fasteners
1 Products availableDecorative Lights, Lamps & Lamp Shades
1 Products availableLighting Component
1 Products availableHeat Exchangers
1 Products availableOur Complete range of products are LED Emitters, LED Thermal Interface, Gesloten Frame, DC / DC DIN-Rail Mounting and rail power supplies.
Telerex has its own connector line including for LED applications, manufactured by our own production company Mechatronix in Taiwan. With more than 300 standard models made from either metal or plastic, MechaTronix offers a complete range of LED connectors. The focus is on round and waterproof models with diameters ranging from 10 to 25 mm, protected up to factor IP68.
MechaTronix has specific models of connectors for DMX, DALI and RGB, which are simple to install with screws, and we even supply complete cable assemblies and extension cables. The connectors are available with 2 to 14 contacts and can handle up to 30 A per contact. Different locking types are available, such as screw, bayonet, and push-pull. Contacts can be equipped with screw, shrinkage, and solder attachments.
LED Emitters come in a wild variety of forms, specs and possible application options. Our main Taiwanese LED manufacturer Edison Opto offers several different SMD components in form factors such as 2835, 3014, 3030, 3528, 5050, 5630, available in all CCTs and CRIs. Apart from these, Edison offers the COB (chip on board) format, available in several build dimensions, making them very easy to integrate in a LED holder. SLM Modules are ready to use Plug n Play COB modules, no soldering required. Using these shaves off a considerable amount of engineering time. These latter COBs only come in CRI80.
About LED EmittersEffective cooling relies on solid thermal conductivity. Therefore, thermal interfaces are used in between the components and the cooling unit. This can be a simple heat sink, a thermal assembly, or a housing. The thermal interface has to ensure maximum thermal coupling.
Although not visible to the naked eye, the housing of a component is not flat. On a microscopic level, the surface is very rough and the same applies to the surface of the heat sink. The resulting air gaps which exist between the two surfaces are filled by using a thermal interface.
But a thermal interface does more than just filling up gaps! The material also ensures that the heat is transferred uniformly to the cooling unit, with better cooling as a consequence. Thicker, softer thermal interface materials can also help in absorbing mechanical stress. Because of the wide variety of cooling solutions that are needed, Telerex offers a variety of thermal interfaces, such as gap fillers, electrically insulating or conductive interfaces, thermal tapes, pastes, greases, and even phase changing interfaces
Overview of thermal interfacesTelerex can assist during the various production processes.
Within each category, Telerex offers a variety of products that each tailor to the cooling requirements of the application and the allocated budget. For simple, moderate heat conduction there are economical options, while more demanding cooling needs will require more expensive materials with a performance of up to 6W/mK.
Watch the video about Laird Phase Changing Interfaces
Learn more on theLaird website about Industry-Leading Maximum Thermo-electric Performance
Because LED lighting is increasingly replacing traditional forms of lighting, Telerex has created a separate division tailored to this particular market. Our competence team has solid knowledge of the LED market and a strong assortment of products, including LED packages and COBs, LED drivers, heat sinks, thermal solutions, connectors and secondary optical products such as lenses and reflectors.
Our range includes model series from several leading manufacturers, such as Mean Well and Inventronix power supplies, Laird thermal interfaces, Prolight Opto LED packages and COBs, connectors, and heat sinks produced by MechaTronix in Taiwan. In addition to these standard products, our own production facilities also allow us to offer client-specific modifications or fully customised solutions.
Telerex offers a very wide package of LED strips for an even wider field of applications. Our main manufacturer of LED strips is Edison Opto, one of Taiwan's main LED producers. LED strips come in all sizes and shapes, but most used are the 3528, 5630, 5050 and 3014 packages. We keep most of them in stock, enabling us to deliver in 2 days. Most LED strips run on 24 Volts, although 12 Volts is also available on demand.
LED strips come in several IP ratings, from IP20 up to IP67, tailoring to your specific needs, most varying in light temperature between 2700K to 6500K. Also available are LED strips in RGB and RGBW. Apart from the CCT, there is a choice in CRI values, ranging from standard CRI80 LED strips to CRI90. The latter is is gaining in popularity, due to the realistic light colour.
LED strips have a standard 3MacAdam step, reducing the risk of deviations in separate shipments.
LED Strip FeaturesTelerex supplies LED engines and COB modules from Prolight Opto and Edison Opto, leading Asian manufacturers of these products. The ProLight Opto Technology Corporation, founded in 2004, focuses on the research, development, and production of high quality mid and high power LED packages. Prolight Opto LED products are predominantly used in commercial lighting, indoor and outdoor lighting, architectural lighting, and flash lighting for digital cameras and phones.
LED Opto Electronics