• Extend wireless network in to any spot at home 300Mbps
• Turn any power outlet into a network connection
• Automated security with simple connect button
• Wireless on/off button for convenience and ease of use
• Double Ethernet ports for direct connection to Ethernet-ready device
• Simple plug & play, no software or installation required
• No new wires, no drilling, no hasslel

• One 10/100 Ethernet port
• Friendly GUI for web configuration
• Support single session IP sec and PPTP pass through for virtual private network (VPN)
• Several popular games are already pre-configured. Just enable the game and the port setting are automatically configured
• Configure as a DHCP server on your network
• Compatible with virtually all standards internet application
• Industry standard and interpretable DSL interface
• Address filtering, DMZ hosting, and much more
• Simple web base status page display a snapshot of your systems configuration and link to the configuration pages
• Downloadable flash software upgrades
• Support for up to 8 permanent virtual circuits (PVC)
• Support for up to 8 PPPoE sessions
• High-speed data transfer rates of up to 54 Mbps
• Compatible with IEEE 802.11b, IEEE 802.11g, 2.4GHz compliment equipment

• ANSI T1.413 issue 2
• ITU G.992.1 (G.dmt)
• ITU G.992.2 (G.dmt)
• ITU G.992.3 (G.dmt)
• ITU G.992.2 (G.dmt)
• IEEE 802.11b_IEEE802.11g

• ATM T1.413 issue2
• Strict ATM communicating mode

• Downstream data rates up to ADSL 8Mbps; ADSL+2 24Mbps
• Upstream data rates up to 1024kbps
• G.lite; downstream data rates up to 1.5Mbps
• G.lite up streams data rates up to 51kbps

Telenet TNDSL 2240 ADSL2 + router is a high quality equipment which can be used as a ADSL MODEM, a wireless AP and a router. Choose the slap-up chipset TNETD7300A provided by the global famous ADSL CMOS corporation TI, which supports kinds of network protocols, steady runs, and is compatible with various DSLAM, which is preferred by the individual users, the SOHO, and the small enterprise to access the internet.

• Four 10/100 Ethernet port with ONE USB(optional)
• Friendly GUI for web configuration
• Support Single-Session IPSec and PPTP Pass-Through for Virtual Private Network (VPN)
• Several popular games are already pre-configured. Just enable the game and the port settings are automatically configured.
• Configurable as a DHCP Server on Your Network
• Compatible with virtually all standard Internet applications
• Industry standard and interoperable DSL interface
• Address Filtering, DMZ Hosting, and Much More
• Simple web based status displays a snapshot of your system configuration and links to the configuration pages
• Downloadable flash software upgrades
• Support for up to 8 Permanent Virtual Circuits (PVC)
• Support for up to 8 PPPOE sessions
• High-Speed Data Transfer Rates of up to 54Mbps
• Compatible with IEEE 802.11b, IEEE 802.11g, 2.4GHz Compliant Equipment

Telenets Midspan POE is a Power-over-Ethernet (Poe) power supply which provides DC power for one Poe-equipped device by "Injecting" DC power through the Spare Pair of the CAT5 (10/100Mbps) Ethernet cable

Plug and Play installation. Our POE device automatically supplies inline power. Local Power LED is present

Telenets Midspan POE is a Power-over-Ethernet (Poe) power supply with integral DC Injector. It provides DC power for one Poe-equipped device by "Injecting" DC power through the CAT5 (10/100Mbps) Ethernet cable. It is compatible with APs and other equipment supporting the IEEE standard Poe pin out (Pins 4&5 Power + / Pins 7&8 Power -). Since our POE device is completely self-contained, a separate power supply and injector is not required

Plug and Play installation. Our POE device automatically detects all POE enabled devices and supplies inline power. Local LED Management display is present.

Telenets Midspan POE is a Power-over-Ethernet (Poe) power supply which provides DC power for one Poe-equipped device by "Injecting" DC power through the Spare Pair of the CAT5 (10/100Mbps) Ethernet cable.

Telenet's 5-port 10/100Mbps Unmanaged Edge Switch is the latest generation of fast Ethernet switching technology. Five 10/100Base-TX auto sensing, auto MDI/MDIX ports eases the selection of cable type for devices connectivity and provide a completely flexible high-performance non-blocking full wire speed solution. This switch provides a range of powerful features, delivering reliability and consistent performance for your network traffic. The switch supports standard IEEE 802.3x Flow Control standard which eliminate packet loss in heavy traffic conditions The Switch uses store-and-forward switching to ensure maximum data integrity. The 10/100 Mbps ports support auto-sensing and auto-negotiation at network speeds. All ports support auto MDI/MDI-X feature, allowing you to connect to workstations, servers, or other switches from any port without the need to change your usual straight-through to twisted-pair cables. The feature of Port Isolation is implemented in this Unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. This feature is implemented using Port based VLAN.

Out of the 5 ports, the 5th port is configured as Uplink Port (PoE-Injector = Data + Power OUT) and remaining ports act as Downlink Ports (PoE-PD = Data + Power IN)

echnical Specifications

Telenet's 8-Port 10/100Mbps Distributed Managed Edge Switch is the latest generation of fast Ethernet switching technology. It contains 7 Downlink 10/100Base-TX ports plus one Uplink 100Base-FX port. The Switch uses store-and-forward switching to ensure maximum data integrity. The switch supports auto sensing, Auto-Negotiation and IEEE 802.3x Flow Control standard which eliminate packet loss in heavy traffic conditions. All ports also support auto MDI/MDI-X feature, eases the selection of cable type for devices connectivity and provide a completely flexible high-performance non-blocking full wire speed solution. The management features include port-based, tagged based VLAN, s, per port bandwidth restriction via rate limiting and port security. Out of these Ports, the last port is configured as Uplink Port and remaining ports act as Downlink Ports. The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Additional features of Rate Limit and Broadcast Storm are also present. With its built-in Remote Management capability, the switch offers an easy-to-use, Platform-independent management for monitoring. For text-based management, the switch can also be accessed via Telnet and the console port for configuration and monitoring.

• 7-Port 10/100Base-TX interface with auto sensing provide a completely flexible high-performance non-blocking full wire speed solution with 100Base-FX fiber Uplink Port.
• Supports Auto-Negotiation for speed and duplex mode.
• Supports Auto-MDIX for each port.
• The switch supports Max Packet Size of 1536 bytes.
• The switch supports standard IEEE 802.3x Flow Control to Prevent Packet Loss.
• Forwarding mechanism Store and Forward.
• Port Isolation using Port-based VLAN.
• IEEE 802.1Q tagging VLAN
• Port security
• Support Bandwidth control From 128k up to Full(100Mbps)
• Support Broadcast Strom Control
• Management via Telnet, Web management, and Consol port.

• 7-Port 10/100Base-TX interface with auto sensing provide a completely flexible high-performance non-blocking full wire speed solution with 100Base-FX fiber Uplink Port.
• Supports Auto-Negotiation for speed and duplex mode.
• Supports Auto-MDIX for each port.
• The switch supports Max Packet Size of 1536 bytes.
• The switch supports standard IEEE 802.3x Flow Control to Prevent Packet Loss.
• Forwarding mechanism Store and Forward.
• Port Isolation using Port-based VLAN.
• IEEE 802.1Q tagging VLAN
• Port security
• Support Bandwidth control From 128k up to Full(100Mbps)
• Support Broadcast Strom Control
• Management via Telnet, Web management, and Consol port.

Telenets 8 Port Gigabit Port Isolation Switch, TSW1108W provides 8 10/100/1000Mbps RJ45 ports. All RJ45 ports support Auto-MDI/MDIX function. It provides a simple, economical, high performance, seamless solution to upgrade to 1000M networking connection. It provides one VLAN switch, the switch is off at default, and at this state the switch can be used as a normal 8 ports gigabit switch. When switch on the VLAN switch, every port can communicate with the uplink port, and the other ports are separate with each other except the uplink port. The port 8 is default as the uplink port. It provides a simple, economical, high performance and flexible solution for your networking construction

• Complies with IEEE802.3, IEEE 802.3u and IEEE802.3ab standard
• Adopts IEEE802.3x for full duplex and Backpressure for half duplex
• 8 10/100/1000Mbps auto-negotiation RJ-45 ports (Auto MDI/MDIX)
• Adopts store-forward technology, providing full wire-speed to assure integrity of data
• Supports Jumbo Frame transmission
• MAC address auto-learning and auto-aging
• Independent bandwidth for each port, and real non-blocking data transfer
• Realize port isolation with just one VLAN, s switch
• 12 V DC power supply
• Sleek desktop metal case

Telenet 8-port 10/100 Mbps managed edge switch is the latest generation of the fast Ethernet switching technology. The switch store and forwarding switching to ensure maximum data integrity the switch support auto sensing auto-negotiations and IEEE 802.3x flow control standard which eliminate packet loss in heavy traffic conditions. All port also support auto MDI/MDI-X feature eases the selection of cable type devices connectivity and provide a completely flexible high-performance non-blocking full wire speed solution the management features include port base, tagged base VLAN, s per port bandwidth restriction via rate limiting and port security. Out of this port, the last port is configure as uplink port and remaining port are downlink ports the feature of port isolation is implemented in this unit is where Ethernet data of the uplink port can be transferred to any of the downlink port but individual downlink port cannot communicate with each other. Additional feature of the rate limit and broadcast storm also are present With its unit-in remote management capability, the switch offers an easy-to-use platform-independent management of monitoring. For text-based management, the switch can also be accessed via telnet and console port for configuration and monitoring.

Feature:

• 8-port 10/100 base-TX interface with auto sensing provide the completely flexible high-performance non-blocking full wire speed solution.
• Support auto-negotiation for speed and duplex mode.
• Support auto-MDIX for each port
• The switch supports max packet size of 1536 bytes
• The switch support standard IEEE 803.2X flow control to prevent packet loss.
• Forwarding mechanism store and foreword
• Port isolation using port-base VLAN
• Port security
• IEEE 802.1Q tagging VLAN
• Support bandwidth control form 128k up to full (100 mbps)
• Support broadcast storm control
• Management via telnet, web management, and console port
• DHCP option 82
• IGMP for multicasting

Telenet's managed switch is the latest generation of fast Ethernet switching technology. Enhanced by its many, features including port Trucking, VLAN tagging, spanning tree, and broadcast storm filters. Eight 10/100Base-TX auto sensing, auto MDI/MDIX ports provide a completely flexible high-performance non-blocking full wire speed. Solution. The management features include port-based, dynamic and static VLAN, s, GVRP, VLAN tagging, IGMP snooping, port mirroring and port security. Two priority queues per port insure minimum delay for voice over IP or multimedia broadcasting Network management can be accessed via Telenet from anywhere on the network or via a console port at the switch. Power: 110/220V AC. The 10/100Mbps ports supporting auto-sensing and auto-negotiation of network speeds and full/half duplex. These ports can connect to workstations and print servers, giving each a dedicated bandwidth. All ports support auto MDI-II/MDI-X uplink, allowing you to connect to workstations, servers, or other switches from any port without the need to change your usual straight-through to twisted-pair cables. Flow Control to Prevent Packet loss The switch supports standard IEEE 802.3x Flow Control. Working in conjunction with buffer overrun auto detection. This full-duplex data transfer mode provides protection against possible data loss for 802.3x supported servers directly connected to the switch. The advanced features, 802.1p, Diffuser, 802.1x*, IGMP, and 802.1q, facilitate the deployment of applications across an enterprise such as: VOIP, streaming media, and multicast content delivery (IP video conferencing, software deployment).

• Physical interface - 10/100 base T (IEEE 802.3) RJ45

• MAC table size -1024 entries in the MAC table
• Forwarding mechanism store and forward
• Switch fabric -3.2gbps, supporting wire forwarding when all the ports are running at full speed.
• VLAN groups up to 64 different VLAN IDs simultaneously can be processed.
• Support port mirroring / port security
• Auto MDI-MDIX
• Light console management

Telenet's 8-port 10/100Mbps Unmanaged Edge Switch is the latest generation of fast Ethernet switching technology. Eight 10/100Base-TX auto sensing, auto MDI/MDIX ports eases the selection of cable type for devices connectivity and provide a completely flexible high-performance non-blocking full wire speed solution. This switch provides a range of powerful features, delivering reliability and consistent performance for your network traffic. The switch supports standard IEEE 802.3x Flow Control standard which eliminate packet loss in heavy traffic conditions. The Switch uses store-and-forward switching to ensure maximum data integrity. The 10/100 Mbps ports support auto-sensing and auto-negotiation at network speeds. All ports support auto MDI/MDI-X feature, allowing you to connect to workstations, servers, or other switches from any port without the need to change your usual straight-through to twisted-pair cables. The feature of Port Isolation is implemented in this Unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. This feature is implemented using Port based VLAN.

• 8-port 10/100Base-TX interface with auto sensing provide a completely flexible high-performance Non-blocking full wire speed solution.
• The switch supports Max Packet Size of 1536 bytes.
• The switch supports standard IEEE 802.3x Flow Control to Prevent Packet Loss.
• Forwarding mechanism Store and Forward.
• Port Isolation using Port-based VLAN.
• Surge Protection on all 8 Ports (Downlink and Uplink ports).

Telenets TSW 8008P is the most cost-effective solution to share network for SOHO users. With easy Installation and configuration, this Plug-&-Play super-compact switch instantly provides reliable network with five new and independent bandwidths with the utmost hardware flexibility.

In addition, each 10/100Mbps port is equipped with built-in Auto-MDI/MDI-X and Auto-negotiation functions. With the user-friendly and hassle-free features, this switch is designed to reliably meet the diverse performance demands of mid-size network, which do not require management capabilities.

• Non-blocking Performance Improves Access to Network Resources
• Eight Independent Bandwidths with 10Mbps 200Mbps Capability
• All Ports Support Auto-negotiation and Auto-MDI/MDI-X to Facilitate Installation and Troubleshooting
• Full Wire Speed Store-and-Forward Technology Instantly Eliminates Bad Packets
• Support IEEE 802.3x Flow-control for Full-duplex and Back-pressure Flow-Control for Half-duplex.
• Delicate Plastic Palm Size with an External Power Adapter
• Support 1K MAC Address
• Built-in High Efficiency SRAM for Packet Buffer
• Easy-to-Understand LEDs Display Real-time Traffic Status to Monitor and Diagnose the Network
• Built-in High Efficiency SRAM for Packet Buffer
• Broadcast Storm Filter, Runt and CRC Filtering Eliminate Erroneous Packets to Optimize the Network Bandwidth.
• Support Power Saving Mode by Cable Detection.

The Telenet TSW 1010 XA switch is an full L2 management 8-port Fast Ethernet switch, plus 2 Gigabits port (support auto copper/fiber switching), with high performance and competitive price. It's a perfect way to extend your network structure.

• Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-X specifications
• 8 port 10/100Mbps TX Auto-Negotiation and 2 port 10/100/1000Mbps TX and 2 1000Mbps SFP port(shared with 10/100/1000M port)
• Supports TP interface Auto MDIX function for auto TX/RX swap
• Support up to 8K MAC address
• Up to 1M bits packet buffer
• Supports Store & Forward architecture and performs forwarding and filtering
• Supports to handle up to 1522 bytes packet
• Supports 8 groups Port-Based VLAN and 512 groups 802.1q tag VLAN
• Supports rate control(64Kbps-80Mbps)
• Supports port mirror
• Supports IEEE802.1D Spanning Tree and IEEE802.1w RSTP protocol filter
• Supports MAC address and binding(up to 400 rules)
• Supports IGMP snooping
• Supports port trunking(up to 12 groups and 8 ports in each group)
• Supports SNMP V1/V2 , RMON MIB(group 1, 2, 3, 9)
• Supports access switch through Web/Telnet/Console
• Supports firmware upgrade through Web/Console
• Build-in power

The Telenet TSW1026XA L2/L4 Fast Ethernet Standalone Switch is equipped with 24 10/100BASE-T (RJ-45) ports, 2 Combo G (RJ-45/SFP) ports. The TSW1026XA is loaded with features such as VLAN, s, GVRP and IGMP, thus provides an easy-to-configure and easy-to-manage network environment. TSW1026XA is perfect for cost-sensitive medium to large network looking to strengthen its network connection.

• Full-duplex mode on port 25 and 26 when work in the Gigabit speed.
• Auto MDI/MDIX on all 10/100 Base-TX ports
• Up to 8K MAC address entries
• 4M-bit for packet buffer size
• Provides flow control mechanism: backpressure for half duplex; IEEE802.3x for duplex operation
• Store-and-forward forwarding scheme
• HOL (Head of Line) blocking prevention
• Port mirroring