A motorized tripper is used along with any other conveyor for distribution of material along a plane of movement. It prevents build-up of materials and helps in maintaining even bunker level.

Trippers are designed to be able to make large longitudinal stockpiles forbagasse, coal, raw sugar, or to unload in specific points, as boiler bunkers, silos or chutes.

The motorized tripper truck moves along the belt conveyor that holds it by the rails displaced for that matter.

Unloading chutes or telescopic chutes can be installed on the tripper; with multiple openings depending on the clients requirements.

Teknik has supplied Motorized trippers of 500 TPH for Coal Handling at OPG, Gummidipondi power plant for bunker feeding at boiler top.

In addition our trippers are also installed at DSM, Bijnor, ESCL, Ambasamudram, Kakira, Uganda, Mayuge, Uganda and many more

A bucket elevator, also called a grain leg, is a mechanism for hauling flowable bulk materials (most often grain or fertilizer) vertically.
It consists of:

A bucket elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps.

Acentrifugal discharge elevatormay be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.

Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a booth, a pit, or a pile of material at the foot pulley.

The buckets can be also triangular in cross section and set close to on the belt with little or no clearance between them. This is a continuous bucket elevator. Its main use is to carry difficult materials at slow speed.

Teknik has supplied both types of bucket elevators. It has supplying a bucket elevator of more than 100 tons per hour capacity to SRSL (Munoli, Karnataka), SRSL ( Kandla, Gujarat ) and Maihar cement (Madhya Pradesh), etc.

Apron Feeders are provided for extraction of material from hoppers and bins and for applications having high impact loads. In addition, these are also used to control the feed rate of more abrasive, heavy and lumpy materials.

Apron feeders are used in mines & minerals, steel plants, coal fields, cement plants, thermal power stations, quarries and ports & harbors. In addition, they are also extensively used in aggregate making, crushing / screening, heavy chemicals and paper mills.

Teknik has supplied an Apron Feeder with a capacity of 2000TPH and 20 Meters Length for controlling the feed rate of Iron ore in a ship loading system.

Teknik has also supplied Apron Feeder to Star Cement, Meghalaya for 1200 TPH for limestone handling.

Teknik knows the pulley and roller business better than anyone! We've been doing it for more than 30 years. Teknik offers belt conveyor pulleys, and rollers in virtually any diameter, wall thickness, length, shaft size or end type as well as keyless or even with key shafts. They're built from mild steel, aluminum or other special alloys - for long-lasting, heavy-duty use. State-of-the-art rubber grooving, lagging, crowning and machining are done to your specifications. Thanks to our automated production lines, we can meet your requirements better and faster than anybody else.

Teknik's pulleys and rollers have been installed in sugar/cement bag handling systems as well as bulk material handling systems like coal, ash, bagasse, bamboo, chip, raw sugar, etc.

Teknik has been regularly supplying rollers & pulleys to TATA Motors for close to 20 years. For the Ennore Port Automation Project, Teknik has supplied rubber lagged pulleys of 1000mm diameter with 2750mm face (length) having shaft diameter of 280mm at bearing.

For function, aesthetics, quality and delivery. depend on Teknik's conveyor Pulleys & Rollers.

A motorized tripper is used along with any other conveyor for distribution of material along a plane of movement. It prevents build-up of materials and helps in maintaining even bunker level.

Trippers are designed to be able to make large longitudinal stockpiles forbagasse, coal, raw sugar, or to unload in specific points, as boiler bunkers, silos or chutes.

The motorized tripper truck moves along the belt conveyor that holds it by the rails displaced for that matter.

Unloading chutes or telescopic chutes can be installed on the tripper; with multiple openings depending on the clients requirements.

Teknik has supplied Motorized trippers of 500 TPH for Coal Handling at OPG, Gummidipondi power plant for bunker feeding at boiler top.

In addition our trippers are also installed at DSM, Bijnor, ESCL, Ambasamudram, Kakira, Uganda, Mayuge, Uganda and many more

A bucket elevator, also called a grain leg, is a mechanism for hauling flowable bulk materials (most often grain or fertilizer) vertically.
It consists of:

A bucket elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps.

Acentrifugal discharge elevatormay be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.

Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a booth, a pit, or a pile of material at the foot pulley.

The buckets can be also triangular in cross section and set close to on the belt with little or no clearance between them. This is a continuous bucket elevator. Its main use is to carry difficult materials at slow speed.

Teknik has supplied both types of bucket elevators. It has supplying a bucket elevator of more than 100 tons per hour capacity to SRSL (Munoli, Karnataka), SRSL ( Kandla, Gujarat ) and Maihar cement (Madhya Pradesh), etc.

Apron Feeders are provided for extraction of material from hoppers and bins and for applications having high impact loads. In addition, these are also used to control the feed rate of more abrasive, heavy and lumpy materials.

Apron feeders are used in mines & minerals, steel plants, coal fields, cement plants, thermal power stations, quarries and ports & harbors. In addition, they are also extensively used in aggregate making, crushing / screening, heavy chemicals and paper mills.

Teknik has supplied an Apron Feeder with a capacity of 2000TPH and 20 Meters Length for controlling the feed rate of Iron ore in a ship loading system.

Teknik has also supplied Apron Feeder to Star Cement, Meghalaya for 1200 TPH for limestone handling.

Teknik knows the pulley and roller business better than anyone! We've been doing it for more than 30 years. Teknik offers belt conveyor pulleys, and rollers in virtually any diameter, wall thickness, length, shaft size or end type as well as keyless or even with key shafts. They're built from mild steel, aluminum or other special alloys - for long-lasting, heavy-duty use. State-of-the-art rubber grooving, lagging, crowning and machining are done to your specifications. Thanks to our automated production lines, we can meet your requirements better and faster than anybody else.

Teknik's pulleys and rollers have been installed in sugar/cement bag handling systems as well as bulk material handling systems like coal, ash, bagasse, bamboo, chip, raw sugar, etc.

Teknik has been regularly supplying rollers & pulleys to TATA Motors for close to 20 years. For the Ennore Port Automation Project, Teknik has supplied rubber lagged pulleys of 1000mm diameter with 2750mm face (length) having shaft diameter of 280mm at bearing.

For function, aesthetics, quality and delivery. depend on Teknik's conveyor Pulleys & Rollers.