Our Products
Stainless Steel DIN 1.4301 / 1.4306 / 1.4307 Sheets & Plates Supplier
We are Manufacturing & Exporting of high quality stainless steel 304 sheets, stainless steel 304L plates, stainless steel 304 coils in thickness of 0.3mm to 120mm. that have found extensive applications in various industries. We also deal in Nickel and copper alloy, Stainless & Duplex Steel, Carbon & Alloy Steel, are the materials which are used for designing of stainless steel sheet, plate and coil. We offer various grades of stainless steel plates & Stainless Steel Sheets link ss 310 plates, ss 317 sheets & ss 321 plates etc.
Specifications
Standards | Designation |
---|---|
ASTM | A 240 |
ASME | SA 240 |
Composition Ranges For 304 Grade Stainless Steel Sheets & Plates
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
304 | min. max. |
- 0.08 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- | 8.0 10.5 |
- 0.10 |
304L | min. max. |
- 0.030 |
- 2.0 |
- 0.75 |
- 0.045 |
- 0.030 |
18.0 20.0 |
- | 8.0 12.0 |
- 0.10 |
304H | min. max. |
0.04 0.10 |
- 2.0 |
- 0.75 |
-0.05 | - 0.030 |
18.0 20.0 |
- | 8.0 10.5 |
- |
Mechanical Properties Of 304 Grade Stainless Steel Sheets & Plates
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
304 | 515 | 205 | 40 | 92 | 201 |
304L | 485 | 170 | 40 | 92 | 201 |
304H | 515 | 205 | 40 | 92 | 201 |
Physical Properties Of 304 Grade Stainless Steel In The Annealed Condition
Grade | Density of ss304 in kg/m3 | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
304/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
Grade Specifications For 304 Grade Stainless Steel
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
304 | S30400 | 304S31 | 58E | 1.43 | X5CrNi18-10 | 2332 | SUS 304 |
304L | S30403 | 304S11 | - | 1.43 | X2CrNi19-11 | 2352 | SUS 304L |
304H | S30409 | 304S51 | - | 1.49 | X6CrNi18-11 | - | - |
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.
Possible Alternative Grades To 304 Grade Stainless Steel
Grade | Why it might be chosen instead of 304 |
---|---|
301L | A higher work hardening rate grade is required for certain roll formed or stretch formed components. |
302HQ | Lower work hardening rate is needed for cold forging of screws, bolts and rivets. |
303 | Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable. |
316 | Higher resistance to pitting and crevice corrosion is required, in chloride environments |
321 | Better resistance to temperatures of around 600-900°C is needed…321 has higher hot strength. |
3CR12 | A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable. |
430 | A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable. |
ASME SA 240 Stainless Steel DIN 1.4301 / 1.4306 / 1.4307 Sheets & Plates Supplier
We are Manufacturing & Exporting of high quality 310s Stainless Steel Sheet, 310 SS Plates, stainless steel 310 coils in thickness of 0.3mm to 120mm. that have found extensive applications in various industries. We also deal in Nickel and copper alloy, Stainless & Duplex Steel, Carbon & Alloy Steel, are the materials which are used for designing of stainless steel sheet, plate and coil.
Composition Ranges For 310 Grade Stainless Steel Sheets & Plates
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
---|---|---|---|---|---|---|---|---|---|---|
310 | min. max. |
- 0.25 |
- 2.00 |
- 1.50 |
- 0.045 |
- 0.030 |
24.0 26.0 |
- | 19.0 22.0 |
- |
310S | min. max. |
- 0.08 |
- 2.00 |
- 1.50 |
- 0.045 |
- 0.030 |
24.0 26.0 |
- | 19.0 22.0 |
- |
Mechanical Properties Of 310 Grade Stainless Steel Plates & Sheets
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max |
||||
310 | 515 | 205 | 40 | 95 | 217 |
310S | 515 | 205 | 40 | 95 | 217 |
Physical Properties Of 310 Grade Stainless Steel In The Annealed Condition
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity(W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
310/S | 7750 | 200 | 15.9 | 16.2 | 17 | 14.2 | 18.7 | 500 | 720 |
Grade Specifications For 310 Grade Stainless Steel
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
310 | S31000 | 310S24 | - | 1.48 | X15CrNi25-20 | - | SUH 310 |
310S | S31008 | 310S16 | - | 1.48 | X8CrNi25-21 | 2361 | SUS 310S |
Possible Alternative Grades To 310 Grade Stainless Steel
Grade | Why it might be chosen instead of 310 |
---|---|
3CR12 | Heat resistance is needed, but only to about 600°C. |
304H | Heat resistance is needed, but only to about 800°C. |
321 | Heat resistance is needed, but only to about 900°C. Subsequent aqueous corrosion resistance also required. |
253MA (2111HTR) | A slightly higher temperature resistance is needed than can be provided by 310. Better resistance to reducing sulphide atmosphere needed. Higher immunity from sigma phase embrittlement is required. |
ASME SA 240 Stainless Steel DIN 1.4449 / 1.4438 Sheets & Plates SupplierWe provide an extensive range of Stainless Steel 317-317L Sheets Plates that is designed using pure grade raw material using modern machinery & tool. These stainless steel sheets and plates are accessible in a variety of grades, thickness, width, length, and surface finishes. We also provide customize dimensions as per sample is given by clients. These SS products are tested on various parameters after finishing process to deliver flawless range to our customers. Our product range is widely used in different industries across the globe.
Our stainless steel product is widely applauded for features like-
Value-added service-
Before dispatching the end product to the customers, these products are strictly subjected to quality measurement test. Like-
We provide test certification reports and documentation reports as per client demand. To ensure safe packing in order to avoid damage we include-
ApplicationsGrade 317L stainless steel is widely used in the following applications :
Specifications
Standards | Designation |
---|---|
ASTM | A 240 |
ASME | SA 240 |
STANDARD | UNS | WERKSTOFF NR. |
---|---|---|
SS 317 | S31700 | 1.4449 |
SS 317L | S31703 | 1.4438 |
Stainless steel grade 317L is a low carbon version of grade 317 stainless steel Sheets. It has the same high strength and corrosion resistance as 317 steel but can produce stronger welds due to the low carbon content.
The Chemical Composition Of Grade 317L Stainless Steel Plates Is Outlined In The Following Table.
Element | Content (%) |
---|---|
Iron, Fe | Balance |
Chromium, Cr | 18-20 |
Nickel, Ni | 44880 |
Molybdenum, Mo | 44624 |
Manganese, Mn | 2 |
Silicon, Si | 1 |
Phosphorous, P | 0.05 |
Carbon, C | 0.03 |
Sulfur, S | 0.03 |
The Mechanical Properties Of Grade 317L Stainless Steel Sheets & Plates Are Displayed In The Following Table.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 595 MPa | 86300 psi |
Yield strength | 260 MPa | 37700 psi |
Modulus of elasticity | 200 GPa | 29000 ksi |
Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (in 50 mm) | 0.55 | 0.55 |
Hardness, Rockwell B | 85 | 85 |
Equivalent Materials To Grade 317L Stainless Steel Are Given Below.
AISI 317L | ASTM A167 | ASTM A182 | ASTM A213 | ASTM A240 |
ASTM A249 | ASTM A312 | ASTM A774 | ASTM A778 | ASTM A813 |
ASTM A814 | DIN 1.4438 | QQ S763 | ASME SA240 | SAE 30317L |
We are dealer and supplier of Stainless Steel 321-321h Sheets Plates in Indian as well as international market. We manufacture stainless steel sheets and plates in customize design using premium quality raw materials. We have an expert team that does their work in a proper way and produce a high-quality product in terms of usability, reliability, and longevity. We offer a wide range of sheets and plates in a variety of sizes and dimensions. These products are subjected to various tests at each stage of production.
Features :
Packaging and documentation :We pay more attention while delivery of products, so we use proper packing method. We usually use a wooden case or pallet to avoid damage or rust or according to customers demand. The company also provides all necessary documents during the shipment of products. This will include-
So, collect the Stainless Steel 321-321h Sheets Plates from us. We provide quality products at the best price. You can buy this product from our dealer as per your desired dimensions.
Specifications
Standards | Designation |
---|---|
ASTM | A 240 |
ASME | SA 240 |
STANDARD | UNS | WERKSTOFF NR. |
---|---|---|
SS 321 | S32100 | 1.4541 |
SS 321H | S32109 | 1.4878 |
Composition Ranges For 321 Grade Stainless Steel Sheets & Plates
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Other | |
---|---|---|---|---|---|---|---|---|---|---|---|
321 | min. max |
- 0.08 |
2 | 0.75 | 0.05 | 0.03 | 17.0 19.0 |
- | 9.0 12.0 |
0.1 | Ti=5(C+N) 0.70 |
321H | min. max |
0.04 0.10 |
2 | 0.75 | 0.05 | 0.03 | 17.0 19.0 |
- | 9.0 12.0 |
- | Ti=4(C+N) 0.70 |
347 | min. max |
0.08 | 2 | 0.75 | 0.05 | 0.03 | 17.0 19.0 |
- | 9.0 13.0 |
- | Nb=10(C+N) 1.0 |
Mechanical Properties Of 321 Grade Stainless Steel Plates & Sheeets
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
321 | 515 | 205 | 40 | 95 | 217 |
321H | 515 | 205 | 40 | 95 | 217 |
347 | 515 | 205 | 40 | 92 | 201 |
Physical Properties Of 321 Grade Stainless Steel In The Annealed Condition
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) | |||
0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
321 | 8027 | 193 | 16.6 | 17.2 | 18.6 | 16.1 | 22.2 | 500 | 720 |
Features-
Specifications-
Packing and documentation reports detail-
Specifications
Standards | Designation |
---|---|
ASTM | A 240 |
ASME | SA 240 |
STANDARD | UNS | WERKSTOFF NR. |
---|---|---|
SS 347 | S34700 | 1.4550 |
SS 347H | S34709 | 1.4961 |
The Key Properties Of Stainless Steel-Grade 347 Sheets & Plates Are Tabulated Below.
Electrical Properties | |
Electrical resistivity ( µOhm.cm ) | 70-73 |
Mechanical Properties | |
Elongation at break ( % ) | <60 |
Hardness - Brinell | 160-190 |
Izod impact strength ( J.m-1 ) | 20-136 |
Modulus of elasticity ( GPa ) | 190-210 |
Tensile strength ( MPa ) | 520-1100 |
Physical Properties | |
Density ( g.cm-3 ) | 7.93 |
Melting point (°C ) | 1400-1425 |
Thermal Properties | |
Coefficient of thermal expansion ( x10-6 K-1 ) | 16-18 @ 20-100°C |
Maximum use temperature in air ( °C ) |
Stainless Steel 410 Sheet/ Plate is found to be widely used in numerous applications in commercial industry. We can source a wide range of products in diverse grades, specification and sizes to meet the special requirements of our customers. This grade offers corrosion resistance in steam, mild environments, and many chemical environments. Our product range comes in unique and customizable sizes and dimensions of steel plates or sheets. Our materials require going through strict quality tests, thus offering long service life with high quality.
Features of Stainless steel 410 sheets/ plate:
Specification:
Quality assurance:Following tests are performed before dispatching end products to our clients:
Packing and Documentation:Nandishwar Steel aim at providing quality material to the patrons. Thus, to ensure the safety of goods during transit materials are bubble wrapped then safely placed into wooden crates or boxes. Documentation also provided as specified by the requirements of the customer such as:
Specifications
Standards | Designation |
---|---|
ASTM | A 240 |
ASME | SA 240 |