TEJDEEP STEELS

Grant Road, Mumbai, Maharashtra

Inconel 718 Rods (UNS N07718) are used in pollution-control equipment, nuclear reactors, cryogenic storage tanks, and more. Alloy 718 Rods are also used in gas turbine engine parts. Alloy 718 Round Bars are as well often used for liquid fueled rocket motors and components, fasteners and instrumentation parts, etc. Some of the best features of these Nickel 718 Round Bars are: Highly demanded, Reasonable price, Premium quality, and more. Hot-working is carried out using a 2050 Degree F (1121 Degree C) maximum furnace temperature. Typically sold in the solution annealed temper, but can be ordered aged, cold worked, or cold worked & aged. We offer the same to our clienteles in custom-made specifications as per requirements.

ASTM B425 Incoloy 825 Hex Bars, Incoloy UNS N08825 Square Bars, Alloy 825 Rods, Incoloy 825 Hot Rolled Round Bar Supplier
We are supplier, exporter and manufacturer of Incoloy 825 Round Bars amongst our patrons. These Incoloy 825 Rods (UNS N08825) are often used in Chemical Processing, Pollution-control, Oil and gas well piping, nuclear fuel reprocessing, and more. Alloy 825 Round Bars are also used in phosphoric acid evaporators; pickling-tank heater, pickling hooks and equipment; chemical process equipment; tank trucks; propeller shafts, and spent nuclear fuel element recovery. Our Alloy 825 Rods is good conductor of electricity is also used for many electrical purposes. These Nickel 825 Rods resists intergranular corrosion in the as-welded condition. Nickel 825 Round Bars has high level of resistance to variety of oxidizing substances such as nitric acid, nitrates, and oxidizing salt. We also offer our patrons a wide range of this product in custom-built sizes and shapes.

As a distinguished manufacturer, we offer these Inconel 625 Round Bars in a wide range to our patrons. For machineability in these Inconel 625 Rods - Low cutting speeds, rigid tools and work piece, heavy equipment, ample coolant and positive feeds are general recommendations. However, these Alloy 625 Round Bars (UNS N06625) does work-harden rapidly so intermediate annealing treatments may be needed for complex component forming operations. Alloy 625 Rods are often used in oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150 Degree C. These Nickel 625 Round Bars are quite resistant to seawater under both flowing and stagnant conditions and under fouling.

We are Exporter, Manufacturer and Supplier of Monel 400 Flat Bars & Monel K500 Flat Bars in India. Alloy 400 Flat Bars (UNS N04400) has good magnetostrictive properties. Alloy K500 Flat Bars (UNS N05500) are resistant to various reducing chemicals & caustic alkalies. Nickel & cobalt base corrosion, temperature and wear-resistant alloys, such as MONEL K500, are categorized as moderate to hard when machining, however, it must be highlighted that these alloys can be machined by using conservative production approaches at reasonable rates. Our Monel 400 Flat Bars are often used in cladding for the upper areas of oil refinery crude columns, and also for propeller and pump shafts. Alloy 400 is slightly magnetic at room temperature. We further offer these Nickel Alloy Flat Bars at the best market and competitive price.

We are Exporter, Supplier and Manufacturer of Monel 400 Circle & Monel K500 Circle in India. These Monel 400 Rings (UNS N04400) are often used for Pumps and valves, which are used in the manufacture of perchlorethylene, chlorinated plastics. They are also used in Monoethanolamine (MEA) reboiling tube. During machining these Monel K500 Rings (UNS N05500) work harden rapidly, generate high heat during cutting, weld to the cutting tool surface and offer high resistance to metal removal because of their high shear strengths. Hardness values in Alloy 400 Circle are suitable for specification purposes provided tensile properties are not also specified. During aging in Alloy K500 Circle, a slight permanent contraction takes place, but little warpage occurs because of the low temperatures and slow cooling rates involved. These Alloy 400 Rings & Alloy K500 Rings are also being offered in custom-made sizes and shapes to our clients.

The availability of latest technology and modern equipment are responsible for guaranteeing the high quality of monel round bars production. The production of monel is done by essentially considering various raw material standard quality along with using high quality ofthe alloy. Monel bars are also produced by considering quality controlling factor so that no lacking in quality can cause dissatisfaction to buyers. Bars are offered to its buyers in a comprehensive range as per the demand made by buyers. However, a reputed industry is always focusing on its customers and is offering the product at reasonable rates.

Features-In the manufacturing industry, the product is manufactured using good quality of alloy and then tends in adding various good features-

• Rugged construction
• Resistance to corrosion
• High tensile strength
• Reliability/durability/longevity
• Anti-corrosive
• Good dimensional accuracy

Testing-In order to assure superiority in the monel round bars various good testing are given greater priority-

• IGC/PMI test
• Hardness test
• Radiography test
• Flaring/flattening test
• Hydrostatic test
• Macro/micro test
• Mechanical/chemical test

Important documentation offered-To clear all doubts of buyers regarding full transparency in the deal, numerous good documentation are offered including-

• Heat treatment chart
• Fumigation certification
• Commercial invoice
• Heat treatment chart
• Certification of origin
• Raw material test report
• Material traceability report

Packaging-The packaging of the product is done using an effective method of packaging. It all includes-

• Shrink-wrapping
• Bubble wrapping
• Carton boxes
• Wooden crates/pallets/boxes

ASTM B166 Inconel 600 Flat Bar, Inconel DIN 2.4816 Flat Bar, 600 Inconel Flat Bar Supplier.
Wee are renowned supplier and manufacturer of Inconel 600 Flat Bars. For higher properties, Alloy 600 Flat Bars (UNS N06600) can be cold worked below 1200 Degree F (649 Degree C). Hot working should be performed between 1600 Degree F and 2250 Degree F, avoiding any work in the range of 1200 Degree F to 1600 Degree F, because the ductility decreases in this temperature range. Nickel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels. It has excellent carburization resistance as one of the finest features. These are beryllium free and are also highly effective with various ceramics. These products come in standard sizes. Other custom-made sizes and shapes are welcome as well.

Attributes-

• Withstanding heavier loads
• Rugged construction
• High tensile strength
• Good dimensional accuracy
• Sturdiness
• Excellent surface finishes

Testing-In a reliable industry, several effective testing gives priority just to assure high quality of Inconel sheets plates production-

• Hardness test
• Flattening/flaring test
• Macro/micro test
• Chemical/mechanical test
• IGC/PMI test
• Pitting resistance test
• Radiography/hydrostatic test

MTC offered-A Mill test certification offered to the buyer in accordance with EN 10204/3.1B.

Documents provided-The industry is offering documentation to its buyers on requests like-

• Commercial invoice
• Fumigation certification
• Packaging list
• Certification of origin
• Raw material test report
• Material traceability report
• Quality assurance plan
• Heat treatment chart

Packaging-When comes to supply the product packaging done in varieties for safer and damage free shipping-

• Wooden pallets/boxes/crates
• Carton boxes
• Shrink-wrapped

As a leading and prominent supplier, we offer these Inconel 601 Flat Bars in a wide range to our customers. Alloy 601 Flat Bars (UNS N06601) are used in a lot of applications such as for Chemical Processing, Heat treating industry, Aerospace, Power generation, and more. It has high mechanical properties at elevated temperatures. They are also used for insulating cans in ammonia reformers and catalyst support grids used in nitric acid production, and also for thermal reactors in exhaust system of petrol engines. These are as well often used in Strand annealing tubes, Steam super-heater tube supports, and so on. Our nickel alloys can be availed from us within the stipulated period of time. Backed by means of international quality standard, we also offer these products in made-to-order sizes and shapes.

As a renowned supplier, we offer this Inconel 601 Round Bars in a wide range to our clienteles. These Inconel 601 Rods (UNS N06601) are highly resistant to carburization. Alloy 601 Round Bars are used in a lot of applications such as for trays, baskets and fixtures which are further used in various heat treatments like in carburizing and carbon nitriding. Alloy 601 Rods has exceptional oxidation resistance to 2200 Degree F, extremely resistant to carburization, excellent creep and rupture power, metallurgical stability, and more. Being a client centric organization we provide these Nickel 601 Round Bars to our prestigious clients at very low price, thats why we enjoying appreciation from our esteemed patrons. Backed with the international quality standard, we as well provide these products in custom-built sizes and shapes.

Inconel 625 Flat Bars, 625 Inconel Flat Bars, Inconel UNS N06625 Flat Bar, Inconel Alloy 625 Flats Supplier

Inconel DIN 2.4856 Flat Bars, ASTM B446 Alloy 625 Flat Bars, Alloy 625 Flat Bars, 625 Inconel Flat Bars Supplier.
As a renowned manufacturer, we offer these Inconel 625 Flat Bars in a wide range to our customers. This Alloy 625 Flat Bars (UNS N06625) can be welded by both manual and automatic welding methods, including gas tungsten arc, gas metal arc, electron beam and resistance welding. Postweld heat treatment of the weld is not necessary to maintain corrosion resistance. Nickel 625 Flat Bars are used in a lot of applications such as for Flare stacks on offshore oil platforms, Hydrocarbon processing from tar-sand and oil-shale recovery projects, and more. They are also used in Bellows and expansion joints, Turbine shroud rings, etc. Following are some of the best features of this product, such as corrosion & abrasion resistance, longer life, light weight, and more. Nandishwar Steel also offers our customers a wide range of made-to-order sizes and shapes of this product.

ASTM B637 Inconel Alloy 718 Flat Bars, Inconel DIN 2.4668 Flat Bars, Alloy 718 Flats Supplier.
We are known exporter, manufacturer and supplier of Inconel 718 Flat Bars in India and abroad. Alloy 718 Flat Bars (UNS N07718) are used in valves, fasteners, springs, mandrels, tubing hangers, well head completion equipment and blow out preventers, gas turbine engine parts, and more. They are also used for Liquid fuel rocket motor components. Other popular uses are high strength bolting, and down hole shafting. The Nickel 718 Flat Bars can be readily machined in either the annealed or the age-hardened condition. The annealed condition will provide a longer tool life to some extent. The age-hardened condition provides enhanced chip breaker tools or chip action and produces an improved finish. We offer the same to our customers in made-to-order specifications as per requirements.

ASTM B408 Incoloy 800 Hex Bars, Incoloy DIN 1.4876, 1.4958, 1.4859 Round Bars, Incoloy 800HT Rods, 800H Incoloy Square Bars Supplier

Incoloy 800H Bright Bars, Incoloy UNS N08800, N08810, N08811 Bars, Alloy 800H Forged Round Bar, 800HT Incoloy Rectangle Bar Supplier.
As a leading exporter, trader and manufacturer, We offers our clienteles a wide range of Inconel 800 Round Bars in India. Heat-treating equipment such as baskets, trays, and fixtures employ Incoloy 800 Rods (UNS N08800). Heavy duty lubricants should be used to minimize galling in all forming operations. Alloy 800H Round Bars is extremely resistant to corrosion, even in acidic environment. Alloy 800HT Rods is particularly useful for high-temperature equipment in the petrochemical industry because the alloy doesn't form the embrittling sigma phase after long time exposure at 1200 Degree F (649 Degree C).These Nickel 800 Round Bars are used for Heat exchangers, Pressure vessels, Dampers, Nitric acid catalyst supports, Reformer outlet pigtails and manifold, and more. We also offer the same to our clienteles in custom-made sizes and specifications.

Alloy 20 UNS N08020 Round Bar, Ros & s Alloy 20 Bars

Alloy 20 ASTM B 473 DIN 2.4660 Round Bar, Rods We are Manufacturer, Exporter and Supplier of all Stainless Steel, Ferrous & Non Ferrous Metals and Industrial Raw Materials in India. We offer a wide range of Alloy 20 Round Bars, Rods as per the requirements of our esteemed clients. Alloy 20 is an austenitic nickel-iron-chromium based alloy with additions of molybdenum and copper. Its nickel content helps in its chloride ion stress and corrosion resistance. Alloy 20 bars are stress corrosion cracking, crevice corrosion, and resistive to difficult conditions. Our expertise lies in offering these in drawing and growth as per required in terms of size and length. Our Alloy 20 Round Bars, Rods are used for processing pharmaceuticals, gasoline, food, solvents, plastics, explosives, synthetic fibres, and a lot of other products.

SMO UNS S31254 Round Bars, SMO DIN 2.4819 Hot Rolled Round Bar, 254 SMO Rectangle Bar, 254 SMO Square Bar Supplier
We engraved a position of leading exporter, supplier and manufacturer of SMO 254 Round Bars and offer an extensive range of the same to our customers. These SMO 254 Rods (UNS S31254) are used in saltwater handling, tall oil distillation columns, flue gas desulfurization scrubbers, components used in petroleum production, and more. SMO 254 Bars has good resistance to erosion corrosion. Most common cold work methods are successful with this alloy. 254 SMO Round Bars are also used in food and chemical processing machinery, pulp mill bleach systems, and more. 254 SMO Rods is somewhat more sensitive to hot cracking and shall be welded with low heat input. 254 SMO Bars is 50 percent stronger than 300-series austenitic stainless steels. We also offer these products in different and custom-made specifications.

ASTM B348 Titanium Alloy Gr 2 Hex Bars, Titanium UNS R50400, N56400 Round Bar, Ti Alloy Gr 5 Bright Bars Supplier in India.

Titanium Alloy Gr 5 Forged Round Bar, Titanium DIN 3.7035, 3.7165 Bars, Grade 5 Titanium Square Bars, Titanium Alloy Gr 2 Rectangle Bar Supplier
We owned a position of prominent supplier and manufacturer of Titanium Gr 2 Round Bars & Titanium Gr 5 Round Bars amongst our clienteles. The cold work characteristics of Titanium Gr 2 Rods are similar to that of a moderately tempered austenitic stainless steel. A mixture of argon and helium is typically preferred here but should be proven before accepting a procedure. Practical applications of Titanium Gr 5 Rods have evolved over time such as shipbuilding: in submarines, ship’s propellers, shafts, rigging, and other highly corrosive parts. After aging at 975 Degree F to 1025 Degree F (524 Degree C to 552 Degree C), the typical yield potency is 150, 000 psi and typical rigidity is 360 BHN.