Navi Mumbai, Maharashtra, India
GST : 27ACZPT5610Q1ZG
Verified
Add Review
Our Product / Services
FUNCTION GENERATOR 0.1Hz To 1MHzWave Form : SINE, SQUARE & TRIANGLE WAVE, Amplitude : 0 - 20V p/pMODEL - CES 306Type - Analog
Frequency - 0.1 hz to 1 mhz in six decade range
Power Supply - 230v ac +/- 10%
Output Amplitude - 0 - 20v p/p for all function
Deal accuracy - +/- 5% of range
WAVE FORMS - Sine , Square & Triangle , Ttl Square Wave (separate O / P)
SINE WAVE DISTORTION - Less than 1% from 100 Hz to 100KHz
SQUARE WAVE DUTY CYCLE - 49% To 51%
SQUARE WAVE RISE TIME - Less than 100 nano Sec. At maximum amplitude
OUTPUT IMPEDANCE - 600 Ohm + 5%
“CROWN” Function Generator 0.1Hz To 1MHz is capable of providing the site , SQUARE, TRIANGLE Wave form. It has linear frequency scale very low Distortion & constant signal amplitude with the output signal symmetry about Zero. The DC coupled output provides square wave without any appreciable Sag at low frequency. It has a maximum 20V P/P amplitude. The output is protected against short circuit. It has an offset control provided to shift the base line of the signal by + 10V. The continuously variable DC offset control further enhance the versatility of the instrument. The equipment is used in Audio Electronics & other Laboratory & Research work.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 2-3 day
0.3Hz To 3MHz FUNCTION GENERATOR WITH DIGITAL COUNTER
MODEL - CES 306D-3
TECHNICALSPECIFICATIONSFrequency Range: 0.3Hz-3MHz.Functions : Sine, Square, Triangle, Ramp, Pulse& TTL pulse output.Display FrequencyFreq : Digital (4digit7segmentdisplay)automatic decimal positionAccuracy Freq : betterthan+(1%+3digit)ofF.SAmplitude : 20Vp-pintoopencircuit(variable).10Vp-pinto50ohmsAttenuator : 2stepsattenuators20dBeach(Total60dB) andvariable20dBAmplitudeflatness +3dBDC Offset (switchable: Upto +10V into open circuit.& continuous) +5 V into 50ohm.Output Impedance: 50ohms & 600Ohms(Switchable)
WAVEFORM CHARACTERISTICS -Sinewave - a)Distortion : <1%Squarewavea)Risetime : <100nsecapprox.(10%to90%)b)Overshoot : <+5%Triangle -a)NonLinearity : <1%(100KHz.)Ramp&Pulse : Dutycycle20:80upto200KHzTriggerPulseoutputa)SyncOutput : TTLGenerala)FM/VCO : availableb)PowerSupply : 230V, 50Hz, AC.c)Accessories : InstructionManual.d)TestLeads : 1xBNCtoCrocodile.1xPowercord
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 2-3 day
0.2Hz To 2MHz FUNCTION GENERATOR WITH DIGITAL COUNTERMODEL - CES 306D-2
Wave Form : SINE, SQUARE & TRIANGLE, RAMP, PULSE, TTL / CMOS O/P
Amplitude : 0 - 20V p/p Open Circuit, 10V p/p (50 Ohm Load)
Type - DIGITAL
Frequency - 0.1 hz to 1 mhz in six decade range
Power Supply - 230v ac +/- 10%
Output Amplitude - 0 - 20v p/p for all function
Deal accuracy - +/- 5% of range
WAVE FORMS - Sine , Square & Triangle , Ttl Square Wave (separate O / P)
SINE WAVE DISTORTION - Less than 1% from 100 Hz to 100KHz
SQUARE WAVE DUTY CYCLE - 49% To 51%
SQUARE WAVE RISE TIME - Less than 100 nano Sec. At maximum amplitude
OUTPUT IMPEDANCE - 600 Ohm + 5%
Function Generator 0.2Hz To 2MHz is capable of providing the site , SQUARE, TRIANGLE Wave form. It has linear frequency scale very low Distortion & constant signal amplitude with the output signal symmetry about Zero. The DC coupled output provides square wave without any appreciable Sag at low frequency. It has a maximum 20V P/P amplitude. The output is protected against short circuit. It has an offset control provided to shift the base line of the signal by + 10V. The continuously variable DC offset control further enhance the versatility of the instrument. The equipment is used in Audio Electronics & other Laboratory & Research work.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 2-3 day
