Our Products
Woodworking Tools And Machines
2 Products availableHydraulic Press
1 Products availableDust Collectors
1 Products availableWe are leaders in the market for providing best range of Pressure Beam for Panel Saw
Post Forming Machineis chiefly used for bonding of flexible laminate with molded edge of the particle board / MDF board or Ply. Bonding can be full round, half round or bull nose type.
We provide two standard modes of operation namely, manual mode and auto mode. In manual mode, all the functions are carried as per the switches pressed by the operator. This is mainly required for bull nose type of job setting. OurPost Forming Machineis operated by the Programmable Logic Controller (PLC). Normally our first program is set for the full round job and second program is for the half round job. The type of job can be selected as per the requirement. The remaining seven programs out of the nine can be customized as per the job requirement. We teach how to program the machine when we come for the installation. When the cycle is started in auto mode, all the operations are carried out in series like clamping, the heater bar forward, and slowly it covers the entire surface to be manufactured. Finally the release of heater bar and de-clamping takes place and the machine cycle comes to the initial/start position.
Post Forming Machine Salient Features:
1. Three (3) clamping cylinders for better work piece holding.
2. Eight (8) cylinders for heater bar operation to ensure uniform pressure.
3. Short job / Long job selection.
4. Full round / Half round setting.
5. Ground and hard chrome plated heater bar for smooth operation and long life.
6. PLC Programmed machine for fully automatic operation.
7. 9 standard programs can be stored.
8. Reputed brand raw material used for manufacturing.
9. Personal attention while manufacturing the machine.
10. Special heater construction for uniform heating.
11. Separate control panel for ease of use.
12. Standard electric circuit.
Post Forming Machine:Technical Specifications
Max. Workpiece length:2400 mm
Max.Work piecelength(Recommended): 600 mm
Min.Work piecewidth:160 mm
Max.Work piecethickness: 100 mm
Min.Work piecelength:16 mm
Connected load: 3 KW
Electric Supply: 3 Phase 415 V AC Other voltages optional
Compressed Air Requirement: 30 LPM at 6 bar
(Specifications are subject to change without prior notice.)
Sawdust is a common problem in the wood working industries. It isdifficult to get rid of all the dust generated after cutting andmanual cleaning of dust is not feasible. Our dust collectors aredesigned to solve this problem. Dust collector prevents the dust fromentering the critical machine parts, avoiding major breakdowns andhence increases the machine life. In addition to this, it helps tokeep the environment clean, healthy and hygienic. Different models ofdust collectors are available for selection as per the flowrequirement and amount of dust to be collected. Various capacitiesare available as per the demand of the applications. Portable dustcollectors have advantage of moving from machine to machine whereverthe requirement is. This easy movement is possible because of thespecial portable design. Portability, reliability and powerfulsuction are the key features of our dust collectors. Our dustcollectors have become an integral part of the wood working industryowing to their safe and reliable operation.
Salient Features:
1. Reliable and powerful suction of dust from machines
2. Protection on the inlet and outlet of the blower to ensure safe and trouble free operation
3. The machine can be assembled in just 10 minutes
4. Quick bag clamp for simple hassle-free replacement of dust bags
5. Blower can swivel in 180? as needed by the application.
6. Single phase AC, 50 Hz operation
7. 1 hp (0.75 kW) motor
Technical Specifications:
Parameter | Model No.: FE010V |
Motor | 1 hp |
(0.75 kW) | |
Air Speed (m/sec) | 32 |
Air Delivery (m3/min) | 16 |
CFM (ft3/min) | 550 |
CMH (m3/hr) | 960 |
Inlet Size (mm (inch)) | 100 mm x 1 hole |
(4 x 1 hole) | |
Static Pressure (inch H2O) | 4.86 |
Filter Surface (ft2) | 15 |
Sound Pressure (dB) | 68 |
Dimensions | 75 x 38 x 185 cm |
30 x 15 x 73 inch | |
Machine Weight | 36 kg 80.64 lb |
Power Supply | Single Phase AC, 50Hz |