Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

TP

Technocrats Plasma Systems Pvt Ltd
location Palghar, Mumbai, Maharashtra

Write a Review
View Number

Our Products

  1. Welding Machines & Equipment 8 Products available
  2. Cutting Machine 7 Products available
  3. CNC Machine 3 Products available
  4. Welding Machinery 3 Products available

  5. Metal Cutting Machine

    2 Products available

  6. Automatic Cutting Machine

    1 Products available

  7. Mig Welding Machinery

    1 Products available

  8. Electric Welding Machine

    1 Products available

  9. Office Automation Products & Devices

    1 Products available

  10. Beams And Girders

    1 Products available
  11. Others Products 5 Products available

Our Products

Our product range contains a wide range of Welding Oscillator

Mma/tig Welding Machine - Td Series

Mma/tig Welding Machine - Td Series
We are providing mma/tig welding machine - td series.Diode based power sources are the basic type arc welding power source used for mmatig applications. Current control is achieved through saturable core reactor. Very reliable power source but not recommended for radiographic welding application as there is no dependable feedback for maintaining the output current constant due to fluctuation of input supply or change in load. Power factor is poor for these power sources.
View Complete Details
Ask Latest Price & Details
Plasma Cutting Equipment

Plasma Cutting Equipment
Plasma Cutting is process by which all types of conducting materials can be cut. This is an economic commonly used process for steel cutting in the industry today. Plasma arc is generated in a device called Plasma Torch. Compressed air, Argon, Nitrogen , Argon + Hydrogen ( 65%+35%) gas is used as plasma gas based on metals and quality requirements. Pilot arc is generated in the torch which oozes out of the nozzle and is thrown on to the job to be cut. Plasma arc is established between the cathode in the torch and the job which is anode through constricted hole in the nozzle. Plasma arc temperature is quite high ( in the range of 11000 degree C to 300000 degree C). The metal under cutting melts instantaneously and is thrown down by the kinetic energy of the Plasma arc. Electrical capacity of the power source decides the max. cutting capacity.
View Complete Details
Ask Latest Price & Details
Plasma Welding Machine

Plasma Welding Machine
Plasma Arc Welding (PAW) is a modification of TIG(GTAW) Welding Process. As Plasma is an intense source of heat, it is used to fuse metals in this process and increase productivity.In PAW, as the electrode is placed within the body of the torch, plasma arc can be separated from the shielding gas. The plasma is then forced through a fine-bore copper nozzle, that compresses the arc and the plasma exits at very high velocity (approximately at the speed of sound) and a temperature approaching 28, 000 C (50, 000 F) or higher. Plasma is the temporary state of a gas. The gas gets ionized after passage of electric current through it and it becomes a conductor of electricity. In ionized state atoms break into electrons(-) and ions(+) and the system contains a mixture of ions, electrons and highly excited atoms. This high velocity of atoms and heat melts the metal and helps to fuse two metals.
View Complete Details
Ask Latest Price & Details
CNC Pipe Cutting Machine

CNC Pipe Cutting Machine
Highly productive and cost effective mode of cutting metal sheets and plates. Cuts mild steel, stainless steel plates and aluminium sheets with high precision. Integrate standard plasma, high speed and high performance plasma power sources based on customers business requirement. High productivity and low operating costs
View Complete Details
Ask Latest Price & Details
Electric Welding Machine

Electric Welding Machine
Metal Welding is a fabrication process to join two metal pieces of same or different type by causing coalescence. Welding is generally done by melting the work pieces with heat & sometimes pressure, and introducing a filler metal to create a weld pool. After cooling, this weld pool becomes a strong joint.Arc Welding is a type of welding that uses a welding power source to create an electric arc between the electrode and the base material to melt the metals at the welding point. They can use either Direct (DC) or Alternating current (AC) and consumable or non-consumable electrodes. The welding region is covered with some shielding gas or some slag.
View Complete Details
Ask Latest Price & Details
Welding Oscillator

Welding Oscillator

We are offering welding oscillator.
View Complete Details
Ask Latest Price & Details
Tig Welder

Tig Welder
  • Features Most Reliable, built on 20 yrs of field experience etc.
The reliable power saving Inverterised Welding Rectifiers. A quality product from the house of high technology. Specially designed to meet your welding requirements. The machines are built to work under the extreme industrial field conditions. All products are designed, manufactured & tested under one roof to ensure the quality.
View Complete Details
Ask Latest Price & Details
Gantry Machine

Gantry Machine
Dual driven gantry type versatile CNC system for all your plate profile cutting needs. Rugged construction of Panther makes it extremely suitable for Plasma Oxyfuel cutting with multiple cutting heads. With precision and accuracy built into the design of the system, combined with excellent cut quality and productivity, Panther provides true value for money. Gantry based CNC profile cutting machines has all popular features generally found in the market. There is no limitation of width and length of the machine. It is possible to deliver machines with very high accuracy of cutting. Unique design of initial and auto height control makes the product more versatile and produces best quality of circles and other shapes. Beveling is possible even on circular cuts. Plasma cutting produces results which are so close to the ideal cuts produced by market leaders at much higher investment and operating cost.
View Complete Details
Ask Latest Price & Details
Micro Plasma Welding Machines

Micro Plasma Welding Machines
In Micro Plasma Welding, a second nozzle is used in addition to shielding gas nozzle. Through this second nozzle, plasma flows, surrounding and constricting the arc, which leads to a high power density and stability. The surrounding gas protects the melt bath of oxidation. The advantages of plasma arc welding are: - higher welding speed and less distortion as well as a higher insensitivity regarding changes in distance. Due to the stabilizing effect of the plasma it is possible to work even with low currents. This makes micro plasma welding suitable for joining very thin metal sheets.
View Complete Details
Ask Latest Price & Details
CNC Air Plasma Cutting Machine

CNC Air Plasma Cutting Machine
In operation, SCR acts conducting when a pulse is provided to the gate. It operates at in either on or off state. Once the gate is triggered with the pulse, SCR goes to the on state and keep conducting until the forward current become less than a threshold known as holding current.SCR is a power device and most of the times it is used in applications where high currents and voltages are involved. The most used SCR application is controlling (rectifying) alternating currents.With the help of oil free compressed air delivery at 5.5 bar & electricity, Thyristor based plasma cutting machine cuts all metals like Stainless Steel, Mild Steel, Copper, Brass, Aluminium, Inconel, Monel, Titanium, Nickel, Chorme, Bronze, Galvanised Steel, Heated Steel, Wear Plates, Castings.
View Complete Details
Ask Latest Price & Details
MIG Mag Welding Machines

MIG Mag Welding Machines
Gas Metal Arc Welding (GMAW), sometimes referred to by its subtypes Metal Inert Gas (MIG) Welding or Metal Active Gas(MAG) Welding, is a Welding process in which an electric arc is formed between a consumable wire electrode and the work piece metal, which heats the work piece metal, causing them to melt and join. Along with the wire electrode, a shielding gas is fed through the welding gun, which shields the process from the contaminants in the air. The process can be semi-automatic or automatic. A constant voltage, direct current, power source is most commonly used with GMAW, but constant current systems as well as alternating current can be used. There are four primary methods of metal transfer in GMAW, called globular, short circuiting, spray and pulsed spray each of which has distinct properties and corresponding advantages and limitations.
View Complete Details
Ask Latest Price & Details
Duplicating Machine

Duplicating Machine
Shape Cutting Machine also known as Flame Cutting Machine or Manual Profile Cutting Machine. They are very useful for repetitive jobs, where they cut same profiles on a recurring basis. Template is cut on a thin sheet of Mild Steel or Stainless Steel. Then the template is mounted on the shapeflamemanual profile cutting machine. Tracer on the machine traces and guides the flame cutting torch to cut the mild steel plate put under the torch. Shapeflamemanual profile cutting machine has flexible arms, which can adjust the reach of the torch. It also contains beveling attachment.
View Complete Details
Ask Latest Price & Details
Welded H Beam

Welded H Beam
H-beam welding system is an automatic system for welding H-beam. There are two different systems offered for this application. In one system job is moved. Welding is carried out by SAW or GMAW process. Sometimes twin wire or tandem welding process is used. In another system welding head is moved. H-beam is produced for structured requirements.
View Complete Details
Ask Latest Price & Details
Semi Automatic Pipe Cutting Machine

Semi Automatic Pipe Cutting Machine
Oxy fuel cutting or oxy fuel welding are processes that use fuel gases and oxygen to weld and cut metals respectively. Pure oxygen is used to increase the flame temperature to allow localized melting of the work piece material in a room environment. A common propaneair flame burns at about 2000 degree Celsius, a propaneoxygen flame burns at about 2500 degree Celsius and acetyleneoxygen burns at about 3500 degree Celsius. In oxy-fuel cutting, a cutting torch is used to heat metal to kindling temperature. A stream of oxygen is then trained on the metal and metal burns in that oxygen and then flows out of the cut (kerf) as an oxide slag. Process requires Gas cylinders for oxygen and acetylene, gas regulators, gas hoses, non-return valve, torch. This can cut only mild steel.
View Complete Details
Ask Latest Price & Details
CNC Plasma Cutting Machines

CNC Plasma Cutting Machines
Technocrats offer wide range of state of the art most user friendly cnc profile cutting machines which are considered one of best option in market today. We have made a space for ourselves in a very short span of time as the leading manufacturers of plasma cnc profile cutting machines and exporter based in mumbai in india
View Complete Details
Ask Latest Price & Details
MIG/mag Co2 Welding Machine-diode Based

MIG/mag Co2 Welding Machine-diode Based
Mig/mag co2 welding machine diode based continuously feed wire in the form of spool is used as electrode & the arc is shield under the cloud of insert gases such as argon, helium (mag) or mixture of active gases or most commonly used gas co2. features100% indian product.most robust construction.best suited for solid & flux coated wires, steel or aluminum.solid state tropicalised pcb for increased reliability.power transformer with delta to star connection for optimumocv.
View Complete Details
Ask Latest Price & Details
CNC Plasma Cutter

CNC Plasma Cutter
  • temperature 11000 degree C to 300000 degree C)
Plasma Cutting is process by which all types of conducting materials can be cut. This is an economic commonly used process for steel cutting in the industry today. Plasma arc is generated in a device called Plasma Torch. Compressed air, Argon, Nitrogen , Argon + Hydrogen ( 65%+35%) gas is used as plasma gas based on metals and quality requirements. Pilot arc is generated in the torch which oozes out of the nozzle and is thrown on to the job to be cut. Plasma arc is established between the cathode in the torch and the job which is anode through constricted hole in the nozzle. Plasma arc temperature is quite high ( in the range of 11000 degree C to 300000 degree C). The metal under cutting melts instantaneously and is thrown down by the kinetic energy of the Plasma arc. Electrical capacity of the power source decides the max. cutting capacity.
View Complete Details
Ask Latest Price & Details
CNC Gas Cutting Machine

CNC Gas Cutting Machine
  • width 7.5m
CNC system for all your plate profile cutting needs. Rugged construction of Panther makes it extremely suitable for Plasma Oxyfuel cutting with multiple cutting heads. With precision and accuracy built into the design of the system, combined with excellent cut quality and productivity, Panther provides true value for money. Gantry based CNC profile cutting machines has all popular features generally found in the market. There is no limitation of width and length of the machine. It is possible to deliver machines with very high accuracy of cutting. Unique design of initial and auto height control makes the product more versatile and produces best quality of circles and other shapes. Beveling is possible even on circular cuts.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Technocrats Plasma Systems Pvt Ltd (Technocrats Plasma Systems Pvt Ltd)
  • Nirav No. 2, Gaon Devi Industrial Complex Near Gaon Devi Temple, Sativali, Vasai, , Palghar, Mumbai, Maharashtra - 401208
  • Share us via
    Linkedin pinterest
  • View Contact Number

  • Found Something Wrong with this Listing? Report Here.