Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 100 mm
• Severance cutting – 125 mm.
• Current range – 500 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Water cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.
• Inbuilt Water-cooling unit for torch cooling.

Inverter based Plasma cutting machine for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 32 mm
• Severance cutting – 45 mm.
• Current range – 100 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Inverter based Plasma cutting machine for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 40 mm
• Severance cutting – 50 mm.
• Current range – 200 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 60 mm
• Severance cutting – 70 mm.
• Current range – 200 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Water cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.
• Inbuilt Water-cooling unit for torch cooling.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 75 mm
• Severance cutting – 90 mm.
• Current range – 300 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Water cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.
• Inbuilt Water-cooling unit for torch cooling.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 32 mm
• Severance cutting – 50 mm.
• Current range – 100 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Inverter based Plasma cutting machine for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Manual Piercing – 16 mm,
• Recommended cutting – 20 mm,
• Severance cutting – 30 mm.
• Current range – 65 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 3 sets,
• Input cable – 3 mtrs.,
• Earthing cable 3 mtrs. with clamp,
• Hose pipe of 3 mtrs.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 40 mm 
• Severance cutting – 60 mm.
• Current range – 125 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 100 mm
• Severance cutting – 125 mm.
• Current range – 500 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Water cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.
• Inbuilt Water-cooling unit for torch cooling.

Inverter based Plasma cutting machine for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 32 mm
• Severance cutting – 45 mm.
• Current range – 100 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Inverter based Plasma cutting machine for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 40 mm
• Severance cutting – 50 mm.
• Current range – 200 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 60 mm
• Severance cutting – 70 mm.
• Current range – 200 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Water cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.
• Inbuilt Water-cooling unit for torch cooling.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 75 mm
• Severance cutting – 90 mm.
• Current range – 300 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Water cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.
• Inbuilt Water-cooling unit for torch cooling.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 32 mm
• Severance cutting – 50 mm.
• Current range – 100 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.

Inverter based Plasma cutting machine for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Manual Piercing – 16 mm,
• Recommended cutting – 20 mm,
• Severance cutting – 30 mm.
• Current range – 65 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 3 sets,
• Input cable – 3 mtrs.,
• Earthing cable 3 mtrs. with clamp,
• Hose pipe of 3 mtrs.

Chopper technology-based Plasma cutting machine with high arc voltage for cutting all conductive metals like Mild Steel (MS), Stainless Steel (SS), Aluminium, Copper, Brass etc. Cutting capacity of the machine is

• Clean cutting – 40 mm 
• Severance cutting – 60 mm.
• Current range – 125 Amps maximum.
• Input supply – 3 Phase, 415 V +/- 15%, 50/60 Hz.
• Also suitable for CNC applications.
• Machine will be supplied with accessories like
• Air cooled Hand cutting torch of 6 mtrs. length,
• Electrode – Nozzle – 5 sets,
• Input cable – 5 mtrs.,
• Earthing cable 6 mtrs. with clamp,
• Hose pipe of 5 mtrs.