Gas Welder #2119283

Inverterised AC/DC TIG welding machine Model SQ 300 with built in H.f. with closed loop feedback control, to keep the set current constant, pulsing facility in DC mode, hot start, gas preflow & post flow, polarity selector switch, digital ammeter, voltmeter, protection against over voltage, under voltage, single phasing, over temperature, over current etc. suitable for M.S & S.S arc & tig welding in DC mode and aluminium welding gg gin AC tig mode having maximum welding capacity up to 300 Amps.

Standard Accessories –

1. Water cooled Tig welding hand Torch with 4 mt. long cable.

2. Water Cooling Unit.

3. Argon flowmeter & regulator.

4. Gas Hose Pipe with both in Connected.1 nos

5. Input Supply cable 5 mtrs

Inverterised AC/DC TIG welding machine Model SQ 400 with built in H.f. with closed loop feedback control, to keep the set current constant, pulsing facility in DC mode, hot start, gas preflow & post flow, polarity selector switch, digital ammeter, voltmeter, protection against over voltage, under voltage, single phasing, over temperature, over current etc. suitable for M.S & S.S arc & tig welding in DC mode and aluminium welding gg gin AC tig mode having maximum welding capacity up to 400 Amps.

Standard Accessories –

1. Water cooled Tig welding hand Torch with 4 mt. long cable.

2. Water Cooling Unit.

3. Argon flowmeter & regulator.

4. Gas Hose Pipe with both in Connected.1 nos

5. Input Supply cable 5 mtrs

Inverterised AC/DC TIG welding machine Model SQ 500 with built in H.f. with closed loop feedback control, to keep the set current constant, pulsing facility in DC mode, hot start, gas preflow & post flow, polarity selector switch, digital ammeter, voltmeter, protection against over voltage, under voltage, single phasing, over temperature, over current etc. suitable for M.S & S.S arc & tig welding in DC mode and aluminium welding gg gin AC tig mode having maximum welding capacity up to 500 Amps.

Standard Accessories –

1. Water cooled Tig welding hand Torch with 4 mt. long cable.

2. Water Cooling Unit.

3. Argon flowmeter & regulator.

4. Gas Hose Pipe with both in Connected.1 nos

5. Input Supply cable 5 mtrs

Inverterised TIG welding machine Model Solaris 400 TIG for TIG welding application with inbuilt High Frequency (H.F.) unit. Features like 2T/4T, Up slope, Down slope, Preflow and Postflow available. Current range – 400 Amps and can be customized as low as 1 Amp as per requirement. Standard accessories will be –

1. Gas cooled TIG welding hand torch with 4 mtrs. long cable

2. Argon flowmeter and Regulator

3. Gas Hose pipe with both in connected

4. Input supply cable 5 mtrs.

5. Earthing cable 4 mtrs.

Inverterised TIG welding machine Model Solaris 600 TIG for TIG welding application with inbuilt High Frequency (H.F.) unit with integrated water-cooling unit for torch cooling. Features like 2T/4T, Up slope, Down slope, Preflow and Postflow available. Current range – 600 Amps and can be customized as low as 1 Amp as per requirement. Standard accessories will be –

1. Water cooled TIG welding hand torch with 4 mtrs. long cable

2. Argon flowmeter and Regulator

3. Gas Hose pipe with both in connected

4. Input supply cable 5 mtrs.

5. Earthing cable 4 mtrs.

Inverterised MIG/MAG welding machine Model ICP 400 CC/CV with closed loop feedback control. Suitable for Arc, TIG and MIG welding application. Current range – 400 Amps suitable to melt 0.8mm/1.2mm/1.6mm wire along with following accessories:

1. 4-rolls quick release wire feeder having servo control.

2. MIG/MAG Torch of capacity 400 Amps with 3 meters long cable with one liner of 1.2mm or 0.8mm or 1.6mm fitted with torch.

3. Interconnecting cable of 5 meters long between machine and wire feeder

4. Input Supply cable - 5 mtrs & Earth cable - 5 mtrs.

5. Regulator + Flowmeter + Preheater + Gas Hose

Inverterised MIG/MAG welding machine Model ICP 500 CC/CV with closed loop feedback control. Suitable for Arc, TIG and MIG welding application. Current range – 500 Amps suitable to melt 0.8mm/1.2mm/1.6mm wire along with following accessories:

1. 4-rolls quick release wire feeder having servo control.

2. MIG/MAG Torch of capacity 500 Amps with 3 meters long cable with one liner of 1.2mm or 0.8mm or 1.6mm fitted with torch.

3. Interconnecting cable of 5 meters long between machine and wire feeder

4. Input Supply cable - 5 mtrs & Earth cable - 5 mtrs.

5. Regulator + Flowmeter + Preheater + Gas Hose

Inverterised MIG/MAG welding machine Model ICP 600 CC/CV with closed loop feedback control. Suitable for Arc, TIG and MIG welding application. Current range – 600 Amps suitable to melt 0.8mm/1.2mm/1.6mm/2.4mm wire along with following accessories:

1. 4-rolls quick release wire feeder having servo control.

2. MIG/MAG Torch of capacity 600 Amps with 3 meters long cable with one liner of 1.2mm or 0.8mm or 1.6mm or 2.4mm fitted with torch.

3. Interconnecting cable of 5 meters long between machine and wire feeder

4. Input Supply cable - 5 mtrs & Earth cable - 5 mtrs.

5. Regulator + Flowmeter + Preheater + Gas Hose

Inverterised TIG welding machine Model Solaris 400 TIG for TIG welding application with inbuilt High Frequency (H.F.) unit with integrated water-cooling unit for torch cooling. Features like 2T/4T, Up slope, Down slope, Preflow and Postflow available. Current range – 400 Amps and can be customized as low as 1 Amp as per requirement. Standard accessories will be –

1. Water cooled TIG welding hand torch with 4 mtrs. long cable

2. Argon flowmeter and Regulator

3. Gas Hose pipe with both in connected

4. Input supply cable 5 mtrs.

5. Earthing cable 4 mtrs.