Techno Crafts Pune, Maharashtra

Boschert Model CU-ProfiCNC Copper Bar Punching/Shearing MachineFEATURESHydraulic material clamping from the sides eliminates waste, and ensuresexact positioning prior to punching. This system allows punching, even onthe edge of the part, without bending it.Feeding system pulls the material through the punch head for completeprocessing with minimal waste, but maintaining excellent accuracy. Twolinear guides support the feeding unit. An AC servomotor guaranteeing arepeatability of +/- 0.05 mm drives the slides.Thick turret style tooling for low cost and readily available punches anddies. Note: punches have special length to allow for thick material andextra stripping springs.Complete safety enclosure using light barriers ensures absolute safety.Automatic part removal system is standard and consists of a full-lengthtable that supports finished parts prior to separation and sorting.CNC control designed specifically for copper bar processing using provenBoschert hardware and software platforms.Set-up, training and full warranty from our U.S. headquarters included.Optional tapping head fits in one punching stationSPECIFICATIONSPunching Stations: 4 Thick Turret Size BOptional up to 7 Thick Turret Size BMax. punch diameter: 31, 7 mm or any shape fitting withinShear Station 8x60 mmPunching capacity 40 tonsMax. material thickness: 15 mmMax. bar length: 4 m ( 6 m optional )Min. bar width: 12 mmMax. bar width: 200 mmStrokes per minute: 180Positioning accuracy: +/- 0.1Repeatability: +/- 0.05Max. positioning speedso X-axis: 100 mm per minuteo Y-axis: 60 mm per minuteBoschert CU ProfiPage 2Specifications, continued:Hydraulic drive: 11 kWHydraulic system capacity: 160 litersApproximate floor space: 5, 6 x 2, 5 m (8, 1 x 2, 5 m option)Approximate height: 1, 9 mApproximate weight 5500 KgCNC CONTROLCNC software: Boschert graphic programming

We offer CNC Tube Punching Machine in a wide range in different shapes of rectangle, square, round, etc. CNC Tube Punching Machine is a flexible machine, which is used for non-deformation punching of tubes and other hollow sections. Our CNC Tube Punching Machine gives high productivity. It is widely used by manufacturers of shelves, storage systems, store fittings, fences, horseboxes, cowsheds, fence systems, ladders, steel furniture, cable ducts, railings, stairs, scaffolding, steel structures, and light metalwork.

Economical precision stamping machines, nibbling and transforming in one heavy-duty-machine with the new punching machine MULTIPUNCH 1250 x 2000 CNC Z completes Boschert his delivery and performance program within the range of punching machines. Accordingly the wish of many customers and higher market requirement indeed the complete treatment of metal sheets in only one working off cycle, has been a new tooling system developed which consists of 8 stations for the admission of tooling system Trumpf. With it and included stepless indexable toolings are totally 64 toolings available and this might be more than enough for most of the sheet metal working. In addition is it possible to pre-adjust toolings for different sheets or for partial sheets by what the reequip expenditure will be to zero in case of instance of repetition.With the experience of more than 3000 delivered punching machines all over the world and the supplement of the new tool changer represent the Multipunch 1250 x 2500 CNC Z an universal and flexible punching machine for overcoming the different functions of sheet metal forming: accuracy punching, nibbling, forming.The size of the sheet panels can have the dimension of 1250 x 2500mm and depending on the material for 4 mm stainless steel 6 mm mild steel or 8 mm aluminium. Due to the stepless adjustment of the clamps may the sheet panels or pre-cut parts of all sizes be clamped, fixed and carried at discretion.An additional repositioning with two sheet hold down allows the complete working off the border so that at optimal nesting respectively utilisation of the sheet does not become waste. The combination of simple and rapid sheet-metal part handling as well as the split second changing of the tooling reduces the non-productive downtime to a minimum and conduct per time unit / shift to longer machine useful life.The tool changer can have all relevant punching, nibbling and forming tool system Trumpf as well as the other Boschert punchin

Manual Hydraulic punching machine for tubes and profiles P80-M. - Manual positioning of holes according to raster guide - Manual feeding and stepping - driven by hand - positioning through raster guide - This model is suitable for short-run production

Ours is a name to reckon upon whenever seeking high-quality CNC Punching Machine of a named brand. We are entrusted with the task of making obtainable never-failing CNC Punching Machine to the length and breadth of the country. We are one of the most preferred Suppliers of CNC Punching Machine in Pune, Maharashtra.

 

Detail :

• An L-sheet is provided with all machines for working very small pieces and pre-bent parts. (Standard)
• The automatic tool lubrication serves to increase tool life when nibbling stainless steel (VA) and decreases edge burrs in aluminium
• Repositioning up to 10 meters and clamp movement without contacting the sheet. 2 robust clamps for sheets up to 200 kg (expandable to 4 clamps). Standard capacitiy up to 7 mm or 12, 7 mm when required. (Standard)
• Sandblasted, corrosion resistant surface as standard. Balls in the table for heavier sheets and easy handling, brushes in the table for thin or scratch sensitive sheets are also available.
• Vacuum slug removal
• CNC/CAD software to import DXF-files into machine language, calculated punch time, graphic simulation
• Nibbling up to 800 strokes / min with integrated oil cooling
• Programmable repositioning of the clamps for faster set up of the machine.
• Tapping and drilling attachment for threads M3 up to M12 and smaller drilled holes in thicker sheets.
• Marking apparatus for marking parts in 10 different fonts.

We supply a wide array of CNC Turret Punching Machine to customers. It is procured from reputed vendors of the market, who ensure its superior quality. CNC Turret Punching Machine is offered in different sizes and capacities as per the requirements of clients. It is equipped with balls for heavier sheets and easy handling, and brushes for thin and scratch sensitive sheets. CNC Turret Punching Machine is widely demanded by customers owing to its several attributes such as sturdy construction, corrosion resistant surface, durability, etc.  

Range  :

• Manual Punching Machine- 28/40 tons
• CNC Punching Machine-28/40 tons
• Turret Punching Machine -28/40 tons
• Combinations of Plasma and Punching Machine- 28/40 tons
• Heavy forming Punching Machine
• Truck Chassis Punching Machine
• Punching for perforation
• Angle Punching Machine

Technical Specifications :

• 360-degree rotation of all tools up to 105mm diameter using brushless DC motors
• Pneumatic indexing
• 6 tools with a diameter of 16mm each, with a slitting tool of 5x30 mm
• L-sheet provided with all machines for working very small pieces and pre-bent parts (standard)
• Automatic tool lubrication
• Repositioning up to 10 meters and clamp movement
• 2 robust clamps for sheets up to 200 kg (expandable to 4 clamps)
• Standard capacity up to 7mm or 12mm, when required
• Vacuum slug removal
• CNC/CAD software to import DXF-files into machine language, calculated punch time, graphic simulation
• Nibbling up to 800 strokes/min with integrated oil cooling
• Programmable repositioning of the clamps for faster set up of the machine
• Tapping and drilling attachment for threads M3 up to M12 and smaller drilled holes in thicker sheets
• Marking apparatus for marking parts in 10 different fonts

We are a trusted Supplier of Manual Punching Machine from Maharashtra, India. We are engaged in offering all ECCO line machines, which are equipped with Trumpf Tooling system and 28 t punching pressure that can be 40 t on special request. Our Punching Machine can be obtained at nominal prices. Order retail or bulk, punctual deliveries are confirmed!

All models are equipped with :

• Constant punching pressure
• Maintenance-free hydraulic drive
• One stripper holder and a plate
• Two different stroke length

The ECCO Line earns money with :

• Small and medium series
• Single pieces and prototypes

Tooling system :

• The worldwide approved Trumpf tooling system is used on the ECCO Line (other systems on request, e.g. Amada, Rainer, XX28)
• The tool is put directly into the tool holder without an intermediate case. Through the large propagation of the Trumpf tooling, the machine is virtually always ready for operation
• 7 seconds. The largest tool diameter is 105 mm (4"). Besides a wide range of standard tools, it is possible to manufacture arbitrary tool within the range of 105 mm diameter
• The metal loss from sharpening will be compensated through changes of the punch stroke length
• Exact alignment of cutting tools with riding clamping ensures long tool life
• It also enables the use of angled Whisper-Tools which can achieve a noise reduction of up to 50%

Technical Specifications :

• Working Area :
  • EL 300 x 500 370 x 700
  • EL 500 x 1000 570 x 1200
  • EL 750 x 1500 820 x 1700

 

• Performance :
  • Max. sheet thickness 12, 7 mm
  • Max. hydraulic punching pressure 280 kN / 400 kN

 

• Speeds : Max. stroke rate 100 strokes / min

 

• Tooling :
  • Trumpf ® style tools
  • Max. punching diameter Ø 105 mm or any shape fitting
  • within 105 mm / 74 mm
  • Optional 92 x 92 mm
  • Tool change time 15 sec. manual

 

• Accuracy of Punching :
  • With standard measuring scales + - 0, 2 mm
  • With digital readout + - 0, 1 mm

 

• Space requirement and weights :
  • EL 300 1520 x 940 x 1540 mm weight 1800 kg
  • EL 500 2400 x 1580 x 1540 mm weight 2500 kg
  • EL 750 3400 x 1580 x 1600 mm weight 3400 kg
  • Electrical Values 28 / 40 T. Electrical connection value 5 / 8 kVA
  • Hydraulic motor 4, 0 / 5, 5 kW
  • Required fuse 3 x 16 A / 3 x 16 A
  • Hydraulic oil 50 / 115 liter

BS activity started with the production of punching units.The units represent the most easy, economic and flexible solution to solve punching needs of flat and profiled sheet.BS manufactures different kind of punching units (punches and dies) offering ready solutions for the most common operations required.

We are one of the prominent companies in supplying of CNC Busbar Punching Machine. We deal in tool room machinery like Retro Fittings New Machines, Used Machines, CNC Press Brake, Boschert GMBH CNC Turret Punch Press, Boschert GMBH CNC Compact, Boschert Hydraulic Punching Machine Compact, Boschert Multi-punch Auto Tools etc. These Busbar Punching Machines are made of high quality raw materials which make them sturdy. These Busbar Punching Machines are widely appreciated due to easy installation, low maintenance, sturdiness, and cost effectiveness. These Busbar Punching Machines can be easily available in market with leading prices. 
Features

• High quality raw materials
• High performance
• Corrosion resistance
• Leading prices

We are offering turret punching machine. Techno crafts offers cnc turret punching machine. The boschert multipunch auto tool carrousel is mounted at the front and below table level. product profile : techno crafts offers cnc turret punching machine. The boschert multipunch auto tool carrousel is mounted at the front and below table level. The multipunch tool carrousel is mounted at the front of the machine, below table level. The vertical and horizontal axis movements are controlled by ball screws with linear ball guides using double carriages. The rotary axis positions the eight cassettes with a track and pinion drive. The multipunch uses trumpf style tools up to size ll (3) and boschert revotools. It is possible to have up to 64 individual tools, which are all fully indexable in the machine. features: fast tool change in 3 up to 5 seconds28 tons hydraulic punching forcehigh accurate punch guiding system. The tool is fitted directly in the piston so no additional clearance like on turret machines. These feature warranty long tools live on punch and diessmart auto clamp movement system. Very fast set up of the clamps on the required positionup to 4 clamps possible (2 standard)auto repositioning up to 10 m for large sheetseasy sheet loading system; sheet lifting device 2 pneumatic cylinder to lift the sheets, so that it can be easily moved to the clamps without human handlingset of keys and instruction manualsautomatic removal of small parts and scrap 300x200 mmwaste removal suction system to prevent the slug to move upprogrammable stroke adjustmentmultitalk memory extension with usb and lan connection for labod controlsafety light guards in front of the machine.

We are involved in supplying an exemplary gamut of CNC Coil Punching Machine (Punching Machine from Coil) to customers. It is sourced from known vendors of the market, who manufacture it using superior quality raw material and advanced technology. CNC Coil Punching Machine is available with us in different specification as per the demands of clients. Our CNC Coil Punching Machine is equipped with new hydraulic system. It consumes low power with high performance and low maintenance.

Technical Specifications :

• Tonnage : 10tons
• Zone of work  : Max width coil 1500mm, no limit along the length
• Workable thickness : Max 4mm aluminum, max 3mm carbon steel, max2 mm stainless steel
• Tools : up to 20, all indexed

Stepless 360 degree rotation of all tools up to 105 mm diameter using brushless DC motors and pneumatic indexing of Revotools. The 7-way Revotool was especially constructed for this model. In addition to 6 tools with a diameter of 16 mm each, with a slitting tool of 5 x 30 mm it is possible to punch nearly every contour, allowing complete processing of the sheet without changing tools. More components of the Compact An L-sheet is provided with all machines for working very small pieces and pre-bent parts. (Standard) The automatic tool lubrication serves to increase tool life when nibbling stainless steel (VA) and decreases edge burrs in aluminium Repositioning up to 10 meters and clamp movement without contacting the sheet. 2 robust clamps for sheets up to 200 kg (expandable to 4 clamps). Standard capacitiy up to 7 mm or 12, 7 mm when required. (Standard) Sandblasted, corrosion resistant surface as standard. Balls in the table for heavier sheets and easy handling, brushes in the table for thin or scratch sensitive sheets are also available. Vacuum slug removal CNC/CAD software to import DXF-files into machine language, calculated punch time, graphic simulation Nibbling up to 800 strokes / min with integrated oil cooling Programmable repositioning of the clamps for faster set up of the machine. Tapping and drilling attachment for threads M3 up to M12 and smaller drilled holes in thicker sheets. Marking apparatus for marking parts in 10 different fonts. Working areaCompact 750x2000 1 810 x 2080 mmCompact 1000x2000 1060 x 2080 mmCompact 1250x2000 1310 x 2080 mm PerformanceMax. sheet thickness 12, 7 mm clamp opening / Revotool 6 mm 2Max. sheet length 9999 mm by repositioningMax. hydraulic punching power 280 kN (optional 400 kN)Max. workpiece weight 200 kg