Our Products
Clocks
2 Products availableIndustrial Machinery
1 Products availableMeasuring Instruments & Equipment
1 Products availablePVC, PP & Plastic Products
1 Products availableClamps
1 Products availableNuts Bolts And Fasteners
1 Products availableElectric Fittings And Components
1 Products availableWe offer the best product range of Manifolds(For TDMI-1, Elbow Banjo Assembly, Lubrication Controller, (O.C.S) Oil Recirculation Systems and Tee Blocks.
Following kinds of Metal Tubes are available for single shot lubrication system: Steel TubesNylon TubesHoses
We manufacture Metal Clamps which are used in lubrication fittings.
TDM- 1 One Way ( for Single Injector) TDM- 2 Two Way ( for two Injectors) TDM- 3 Three Way ( for three Injectors) TDM- 4 Four Way ( for four Injectors)
TDM- 5 Five Way ( for five Injectors) TDM- 6 Six Way ( for six Injectors) TDM- 7 Seven Way ( for seven Injectors) TDM- 8 Eight Way ( for eight Injectors)
TDM- 9 Nine Way ( for nine Injectors) TDM- 10 Ten Way ( for ten injectors)
We manufacture Progressive Distributors Blocks which are used in lubrication fittings.
We are engaged in manufacturing and supplying of Elbow Banjo Assembly.
| Sr. No. | Model | Suitable for tube with OD In mm | D | L1 | L | IH | H | SI | S |
| 1 | F-B-4/M8x1 | 4 | M8x1 | 25 | 33 | 10 | 22 | 11 | 9 |
| 2 | F-B-4/1/8"BSP | 4 | 1/8" BSP | 27 | 33 | 10 | 22 | 13 | 9 |
| 3 | F-B-4/M10x1 | 4 | M10x1 | 27 | 33 | 10 | 22 | 13 | 9 |
Panel Mount Type, ON TIME 5 sec. (fixed), OFF TIME 1, 2, 4, 8, 16, 32, 64, 128 min. (adjustable) with the help of Rotary Switch. 8 LED's bar makes possible to read out the time over with the resolution of 1 minute.
Techno Drop has developed different types of oil recirculating systems as per design provided by the customer's This normally contains main oil tank (reservoir), electric motors, pumps, pressure switch, float switch temperature indicator, heat exchanger, pressure gauge, flow switch strainers, duplex filter, drain valve, ball valve, healing elements and electronic control panel.
Note : Specification should be provided by customers as per their requirement.
The Take OFF metering injectors are made of zinc (pressure die casting) material.
The Take OFF metering injectors works on a different principle unlike the normal metering injectors which discharges the oil when pump is ON. In this case when the pump is ON the TAKE OFF injectors are charged and the spring loaded piston ejects (Pin) out thereby indicating TAKE OFF injectors are charged. When the pump stops the oil is flushed out from the injectors to the lubricating points and the piston goes back. A non return valve in each injectors does not allow oil to go back.
TDMI-1with Dosage 0.01 cc, 0.03 cc, 0.05 cc, 0.10 cc, 0.16 cc Per Stroke
TDMI -2 With Dosage 0.25 cc, 0.40 cc Per Stroke.
TDMI -3With Dosage 1.00 cc, 1.60 Per Stroke Note : Above metering injectors are available in M.S. as well as brass with honed bore Nitrile rubber parts & accurate dosage.
We manufacture Elbow Blocks which are used in lubrication fittings.
| Sr. No. | Model | Suitable for tube with OD In mm | H1 | H | L | S |
| 1 | F-EB-4 | 4 | 25 | 33 | 33 | 9 |
| 2 | F-EB-6 | 6 | 25 | 35 | 35 | 11 |
We are engaged in offering straight connector (Taper Threads)
| Sr. No. | Model | Suitable for tube with OD In mm | B | D | LI | L | SL | S |
| 1 | F-Sc-4T/1/4"UNF | 4 | 6 | 1/4" UNF | 17 | 25 | 11 | 9 |
| 2 | F-Sc-4T/M8x1 | 4 | 7 | M8X1 | 17 | 25 | 11 | 9 |
| 3 | F-Sc-4T/1/8"BSP | 4 | 7 | 1/8" BSP | 17 | 25 | 11 | 9 |
| 4 | F-SC-6T/1/8" BSP | 6 | 7 | 1/8" BSP | 22 | 32 | 13 | 11 |
| 5 | F-SC-6T/M10X1 | 6 | 7 | M10X1 | 22 | 32 | 13 | 11 |
Electronic Lubrication timer with ON TIME 5 sec. (fixed) OFF TIME 1, 2, 4, 8, 16, 32, 64 & 128 min. (adjustable) with the help of Rotary Switch. A 8 LED's bar makes possible to read out the time over with the rate of 1 minute.
Models TDRL - 5-6Reservoir Cap. - 5 ltr., Number of Outlets of Plunger Pump-6 nos. Maximum Pr. 250 Kg/ Cm, Motor .25 HP/ 1.8 kw, 3 Phase, 415V, AC, 1340 RPM, Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.
TDRL- 15-6Reservoir Cap. - 15 Ltr., Number of Outlets of Plunger Pump- 6 Nos. Maximum Pr. 250 kg/Cm, Motor .25 HP/ 1.8 kw, 3 Phase, 415 V, AC, 1340 RPM, Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.
TDTL 15-12Reservoir Cap. - 15 Ltr., Number of outlets of Plunger Pump- 12. Nos. Maximum Pr. 250 Kg/ Cm, Motor.25 HP/.18 Kw, 3 Phase, 415V. AC, 1340 RPM. Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.
Note: Rreservoir Cap. & No. of Plunger Pump can be increased or decreased as per customer requirement
Techno Drop Manufactures an exclusive Dual Line Grease Lubrication system. In this system there are two Lubrication outlets, for two lines. The system starts to deliver the grease in line-1 and Fills this line up to set pressure. When the pressure of this line reaches to the set pr., the system stops to delivers the grease in line 1 and starts to deliver the grease in line-2 fills it upto set pressure. When the set presure in line -2 is built up then it again starts filling the grease in line -1. This process will continue up to the set time.
It can be used in heavy Industrial Machinery such as steel plants, sugar plants, Cement plants, Paper plants and turbines etc. Dual Line System works with max. Pressure of 500 bars with 11 cc/ min discharge per outlet continuously. It can deliver the grease in pipe line of up to approx. 60 mtr. Length. In case of any blockages in the one outlet of system, the system will be remain in operation. After complete functions of this system has been controlled by the electric control panel.
