Our Products
(Model : L-13/ L-14 ) |
Switching contracts are hermitically sealed in glass, totally protecting them from surroundings. Switch is isolated from internal media by indited coupling giving extra long life. |
Additional Information:
Delivery Time : 2 to 3 days
(Model : UR - 24) |
U-Tube Manometer and Single Limb Manometeris used for measurement of Differential pressure, vaccum, pressure, and flow measurements. Connections are used 1/4" BSP M/F Available in Wall Mounted and Stand Mounted |
(Model : PB-31 ) |
PTFE Bellows are specially designed from virgin PTFE moulded. The bellows can be used upto 220 C Maximum pressure allowable is restricted Spark test 10 Kv. |
(Model : L-17)
(Model : L-1625) Top mounted ensures absolute safety simple principle of buoyancy & magnetism works together to indicate level of toxic liquids with high pr. Application like molten sulphur phosphorus amonia, acids solvents liquid chlorine lead etc. |
(Model : L-11/ L-12 ) |
Put an end to common problems of conventional U-seal like Contamination of main liquid, Dangerous liquid spilling over tank top, Dangerous vapour escape when sealing liquid is blown out sucked in during transfers.Vapour sealed concept for vapour isolation in float & board type level indicator - Superior & Alternative advantages Absolute vapour tightness, Clean installation, No sealing liquids Trouble free service, Suitableeven for reacting liquids like HCL, HNO3, NH4OH, etc. |
Cable Float Switch |
(Model : L-21) |
Float cable is long lasting and can be used in any climateCable length is adjustableSimple construction, Maintenance free can be used even in dirty waterSwiching capacity 10 A / 250 V ACSeries : CLS-80Float material PPOperating temp. Upto 100 C |
(Model : L-22 ) |
Magnetic level switch float operated hermitically. Sealed switching contact and side mounted fitting available in weatherproof & explosion proof. 1.5 Amp. 230V. NO-C-NC Hi- Low. |
Additional Information:
Payment Terms :
(Model : DLS-1) |
This Type Level Switch most Operated in ETP, Corrosive sewage Type, Solvent And this also called Weight Loss Type Switch & Switch supply up to 230 V, 1.5 Amp, Contact NO-C-NC |
(Model : LS - 50 ) |
(Model : GR - 21 ) |
Glass Tuber Rotameters are used for measurement of Flow rate of Liquid. Rotameter is normally visible in the Glass tube, Level Shows by Pointer moving under Measuring Scale.Flange or Screw Connections are used. |
(Model : GR - 21 ) |
Techno Con Make metal tube Rota meters are designed to measure flow are of Gases and Liquid under critical conditions. It made of a tapered metal tube with indicating assembly. A magnet encapsulated in float couples with rotating magnet connected to an indicating pointer. So the movement of float is accurately indicated. |
(Model : AR-22)
Full View Type for LOW Pressure & Temperature (Model No. L-23)
Double Window Type for HIGH Pressure & Temperature (Model No. L-24)
Applications : Vertical full pipe flow Gravity & very lowflow Standard specifications : Toughened Glass, Window, Compressed asbestos gaskets, Full vacuum rating |
(Model : FV-20) |
Self operated Float Valve |
(Model : SB-30)
(Model : OL-41)
(Model No. LLT - 01) |
Principle of operation :This is level transmitter - employing magnet embedded float. The magnet embedded float buoys Up along with the level rise & it cuts in or cuts out a series of resistors kept sealed inside a stem. The out put which us current signal of 0 -20 or 4-20 mA is transmitted to remote area i.e. Say Pump room or control room. Display Panel Box can be Mounted any where as per like place Operator Room, Plant control Room, even more distance from Tank. It gives very clear Level Indication in Digital FormatAccuracy : +/- 1% of total range |
Automation system gives signal for operating Pump, solenoid valve, Pneumatic valve, Sensing High & Low positions or any other alarm system.
This is operated by supply of 24 V DC or 230 V AC with 5 Amps.
Flame Proof or Weather Proof Control panel duly wired for housing of System along with necessary accessories such as 24 V DC, terminal block, interconnecting wires, Lamp, ferrules, LOGIC RELAY cards, channel etc.
(Model No. TG - 25) |
Toughened Guage Glass mode of KLINER imported raw material. Fully transparent plate serrated (Lined) or plain provided with two Nos. 1.5m thick metallic gaskets. High quality material ensures restistance to thermal shock and high mechanical strength. The jointing faces of the glass are machined flat and parallel tolerance as per IS : 5428.Guage glass is provided in fittings and there is no danger of particles flying out if it is damaged in services it can withstand high boiler steam pressure and can be used at temp 450C |